#!/bin/sh # PhreakScript # (C) 2021-2025 Naveen Albert, PhreakNet, and others - https://github.com/InterLinked1/phreakscript ; https://portal.phreaknet.org ; https://docs.phreaknet.org # v1.3.2 (2026-01-08) # Setup (as root): # cd /usr/local/src # wget https://raw.githubusercontent.com/InterLinked1/phreakscript/master/phreaknet.sh # chmod +x phreaknet.sh # ./phreaknet.sh make # phreaknet update # phreaknet install ## Begin Change Log: # 2026-01-08 1.3.2 Run bootstrap.sh if needed # 2025-09-22 1.3.1 Improve script portability # 2025-07-07 1.3.0 Use GitHub API to download patches # 2025-01-24 1.2.2 Asterisk: Target 22.2.0 # 2024-12-30 1.2.1 DAHDI Linux: Work around compilation failure for newer kernels # 2024-11-03 1.2.0 Asterisk: Install Asterisk 22 by default # 2024-10-16 1.1.8 wanpipe: Installation procedure improvements # 2024-09-19 1.1.7 DAHDI: Slipstream critical build fixes, fix build issues on various distros and kernels # 2024-09-16 1.1.6 DAHDI: Add patch to enable building of XPP drivers on 32-bit architectures # 2024-09-15 1.1.5 DAHDI: Massive overhaul to DAHDI stop/start/restart logic, fixes for manual span assignment # 2024-09-11 1.1.4 DAHDI: Target DAHDI 3.4.0, update patches # 2024-03-17 1.1.3 DAHDI: Only build wanpipe if requested # 2024-03-09 1.1.2 Asterisk: fix broken patches that no longer applied # 2024-01-12 1.1.1 Asterisk: target Asterisk 21.1.0-rc1, fix 'phreaknet restart' command # 2023-10-26 1.1.0 Asterisk/DAHDI: target Asterisk 21, DAHDI 3.3.0-rc1 # 2023-09-27 1.0.5 DAHDI: restore tor2 and pciradio drivers, PhreakScript: pull update script from GitHub # 2023-09-16 1.0.4 DAHDI: Fix DAHDI driver restoral, fix wcte12xp compilation on kernels >= 5.16 # 2023-09-08 1.0.3 wanpipe: Use wanpipe 7.0.36 # 2023-08-30 1.0.2 wanpipe: Use wanpipe 7.0.35 # 2023-08-28 1.0.1 PhreakScript: remove gerrit commands # 2023-07-27 1.0.0 Asterisk: target 20.4.0 # 2023-06-18 0.3.4 PhreakScript: add source command # 2023-05-25 0.3.3 Asterisk: target 20.3.0 # 2023-03-16 0.3.2 Asterisk: target 20.2.0 # 2023-03-03 0.3.1 DAHDI: disable XPP drivers on all 32-bit architectures to fix build failures # 2023-02-26 0.2.7 PhreakScript: fix install user (again) # 2023-02-25 0.2.6 PhreakScript: fix install user # 2023-02-13 0.2.5 Asterisk: remove merged patches # 2023-01-28 0.2.4 PhreakScript: fix GDB installation detection # 2023-01-17 0.2.3 DAHDI: Correct for DAHDI no longer including CONFIG_PCI and patch cdd6ddd0fd08cb8b7313b16074882439fbb58045 failing # 2023-01-17 0.2.2 DAHDI: Correct for DAHDI no longer including CONFIG_PCI and patch 45ac6a30f922f4eef54c0120c2a537794b20cf5c failing # 2023-01-12 0.2.1 Asterisk: target 20.1.0 # 2023-01-07 0.2.0 Asterisk: readd chan_sip support for master # 2022-11-27 0.1.99 Asterisk/DAHDI: add app_loopdisconnect # 2022-11-25 0.1.98 Asterisk: add unmerged patches # 2022-11-20 0.1.97 Asterisk: update usecallmanager target # 2022-11-16 0.1.96 Asterisk: add out of tree modules # 2022-11-05 0.1.95 PhreakScript: add minimal external codec handling # 2022-10-27 0.1.94 PhreakScript: add keyperms command # 2022-10-27 0.1.93 Asterisk: add unmerged patches, PhreakScript: add threads command # 2022-10-20 0.1.92 Asterisk: target Asterisk 20.0.0 # 2022-10-15 0.1.91 PhreakScript: add reftrace command # 2022-09-28 0.1.90 DAHDI: remove merged DAHDI compiler fix, add libpri compiler fix # 2022-09-16 0.1.89 Asterisk: add unmerged patches # 2022-09-03 0.1.88 Asterisk: add unmerged patches # 2022-09-03 0.1.87 DAHDI: Add support for Raspberry Pi # 2022-09-02 0.1.86 Test Suite: upgraded for python3 # 2022-08-31 0.1.85 DAHDI: support kernel version mismatches # 2022-08-25 0.1.84 PhreakScript: improved rundump # 2022-08-06 0.1.83 PhreakScript: added version command # 2022-07-30 0.1.82 PhreakScript: streamline prereq install # 2022-07-29 0.1.81 DAHDI: fix wanpipe compiling, target DAHDI 3.2.0 # 2022-07-24 0.1.80 Asterisk: remove merged patches # 2022-07-20 0.1.79 Asterisk: fix memory issue in app_signal # 2022-07-20 0.1.78 PhreakScript: add fullpatch command # 2022-07-11 0.1.77 PhreakScript: added package audit # 2022-07-11 0.1.76 PhreakScript: streamline enhanced dependencies # 2022-07-05 0.1.75 Asterisk: update usecallmanager target # 2022-07-01 0.1.74 Asterisk: add res_irc # 2022-07-01 0.1.73 PhreakScript: fix RSA chown # 2022-06-26 0.1.72 PhreakScript: added wizard command # 2022-06-23 0.1.71 Asterisk: target 18.13.0 # 2022-06-01 0.1.70 PhreakScript: fix patch conflicts # 2022-05-17 0.1.69 Asterisk: readd hearpulsing # 2022-05-17 0.1.68 PhreakScript: enhanced install control # 2022-05-16 0.1.67 Asterisk: add func_query and app_callback # 2022-05-14 0.1.66 PhreakScript: add trace notify and custom expiry # 2022-05-12 0.1.65 Asterisk: target 18.12.0 # 2022-05-05 0.1.64 PhreakScript: enhance installation compatibility # 2022-05-01 0.1.63 Asterisk: add app_predial # 2022-04-26 0.1.62 PhreakScript: add restart command # 2022-04-25 0.1.61 PhreakScript: remove antipatterns # 2022-04-24 0.1.60 DAHDI: add critical DAHDI Tools fix # 2022-04-07 0.1.59 PhreakScript: improved odbc installation # 2022-04-07 0.1.58 PhreakScript: add autocompletion integration # 2022-04-05 0.1.57 PhreakScript: added res_dialpulse, misc. fixes # 2022-04-03 0.1.56 PhreakScript: move boilerplate configs to GitHub # 2022-04-03 0.1.55 Asterisk: add app_selective # 2022-04-01 0.1.54 PhreakScript: warn about updates only if behind master # 2022-04-01 0.1.53 PhreakScript: allow standalone DAHDI install # 2022-03-27 0.1.52 PhreakScript: added dialplanfiles # 2022-03-25 0.1.51 PhreakScript: add fail2ban # 2022-03-25 0.1.50 PhreakScript: add paste_post error handling # 2022-03-20 0.1.49 Asterisk: add func_dtmf_flash # 2022-03-17 0.1.48 PhreakScript: added swap commands # 2022-03-11 0.1.47 DAHDI: fix compiler error in DAHDI Tools # 2022-03-06 0.1.46 Asterisk: added app_featureprocess # 2022-03-05 0.1.45 PhreakScript: added cppcheck # 2022-03-04 0.1.44 PhreakScript: add apiban # 2022-03-01 0.1.43 Asterisk: update Call Manager to 18.10 # 2022-02-25 0.1.42 Asterisk: Fix xmldocs bug with SET MUSIC AGI # 2022-02-23 0.1.41 PhreakScript: add out-of-tree tests for app_assert # 2022-02-23 0.1.40 PhreakScript: minor test suite fixes # 2022-02-23 0.1.39 PhreakScript: minor refactoring # 2022-02-11 0.1.38 Asterisk: refined freepbx support # 2022-02-10 0.1.37 Asterisk: target 18.10.0 # 2022-02-05 0.1.36 Asterisk: add hearpulsing to DAHDI # 2022-02-03 0.1.35 PhreakScript: added preliminary freepbx flag # 2022-01-27 0.1.34 PhreakScript: added master branch install option # 2022-01-22 0.1.33 Asterisk: removed func_frameintercept # 2022-01-19 0.1.32 Asterisk: add app_playdigits # 2022-01-18 0.1.31 Asterisk: Temper SRTCP warnings # 2022-01-10 0.1.30 Asterisk: add res_coindetect # 2022-01-08 0.1.29 Asterisk: add app_randomplayback # 2022-01-07 0.1.28 Asterisk: add app_pulsar # 2022-01-04 0.1.27 Asterisk: add app_saytelnumber # 2022-01-01 0.1.26 PhreakScript: removed hardcoded paths # 2021-12-31 0.1.25 PhreakScript: added ulaw command, Asterisk: added func_frameintercept, app_fsk # 2021-12-27 0.1.24 PhreakScript: add tests for func_dbchan # 2021-12-26 0.1.23 PhreakScript: added Asterisk build info to trace, Asterisk: added app_loopplayback, func_numpeer # 2021-12-24 0.1.22 PhreakScript: fix path issues, remove upgrade command # 2021-12-20 0.1.21 Asterisk: update target usecallmanager # 2021-12-17 0.1.20 PhreakScript: add tests for verify, added backtrace enable # 2021-12-16 0.1.19 PhreakScript: added support for building chan_sip with Cisco Call Manager phone support # 2021-12-15 0.1.18 PhreakScript: added runtests, Asterisk: update func_evalexten # 2021-12-14 0.1.17 Asterisk: update func_evalexten, PhreakScript: added gerrit command # 2021-12-13 0.1.16 Asterisk: patch updates, compiler fixes # 2021-12-12 0.1.15 Asterisk: add ReceiveText application # 2021-12-12 0.1.14 Asterisk: add app_verify, PhreakScript: fix double compiling with test framework # 2021-12-11 0.1.13 PhreakScript: update backtrace # 2021-12-09 0.1.12 Asterisk: updates to target 18.9.0 # 2021-12-05 0.1.11 PhreakScript: allow overriding installed version # 2021-12-04 0.1.10 Asterisk Test Suite: added sipp installation, bug fixes to PhreakScript directory check # 2021-11-30 0.1.9 Asterisk: add chan_sccp channel driver # 2021-11-29 0.1.8 PhreakScript: fix trace bugs and add error checking # 2021-11-26 0.1.7 PhreakScript: added docgen # 2021-11-26 0.1.6 Asterisk: app_tdd (Bug Fix): added patch to fix compiler warnings, decrease buffer threshold # 2021-11-25 0.1.5 PhreakScript: removed unnecessary file deletion in dev mode # 2021-11-25 0.1.4 PhreakScript: changed upstream for app_softmodem # 2021-11-24 0.1.3 PhreakScript: refactored out-of-tree module code and sources # 2021-11-14 0.1.2 Asterisk: chan_sip (New Feature): Add fax control using FAX_DETECT_SECONDS and FAX_DETECT_OFF variables, PhreakScript: path improvements # 2021-11-12 0.1.1 PhreakScript: (PHREAKSCRIPT-1) fixed infinite loop with --help argument # 2021-11-09 0.1.0 PhreakScript: changed make to use hard link instead of alias, FreeBSD linking fixes # 2021-11-09 0.0.54 PhreakScript: lots and lots of POSIX compatibility fixes, added info command, flag test option # 2021-11-08 0.0.53 PhreakScript: fixed realpath for POSIX compliance # 2021-11-08 0.0.52 PhreakScript: POSIX compatibility fixes for phreaknet validate # 2021-11-08 0.0.51 PhreakScript: compatibility changes to make POSIX compliant # 2021-11-07 0.0.50 PhreakScript: added app_dialtone # 2021-11-06 0.0.49 PhreakScript: added debug to trace # 2021-11-03 0.0.48 PhreakScript: added basic dialplan validation # 2021-11-02 0.0.47 PhreakScript: switched upstream Asterisk to 18.8.0 # 2021-11-01 0.0.46 PhreakScript: added boilerplate asterisk.conf # 2021-10-30 0.0.45 PhreakScript: add IAX2 dynamic RSA outdialing # 2021-10-25 0.0.44 PhreakScript: bug fixes to compiler options for menuselect, temp. bug fix for app_read and addition of func_json # 2021-10-24 0.0.43 PhreakScript: temporarily added app_assert and sig_analog compiler fix # 2021-10-16 0.0.42 PhreakScript: Added preliminary pubdocs command for Wiki-format documentation generation # 2021-10-15 0.0.41 PhreakScript: remove chan_iax2 RSA patch (available upstream in 18.8.0-rc1) # 2021-10-14 0.0.40 PhreakScript: Added GitHub integration # 2021-10-14 0.0.39 Asterisk: change upstream Asterisk from 18.7 to 18.8.0-rc1, remove custom patches for logger, app_queue, CHANNEL_EXISTS, func_vmcount, app_mf (available upstream in 18.8.0-rc1) # 2021-10-14 0.0.38 PhreakScript: Added update protection (against corrupted upstream) and ability to set custom upstream source for PhreakScript # 2021-10-12 0.0.37 Asterisk: Pat Fleet sounds, boilerplate audio files, pulsar AGI # 2021-10-12 0.0.34 DAHDI: Changed upstream from master to next branch by manually incorporating these patches # 2021-10-08 0.0.2 Asterisk (ASTERISK-29681): chan_sip (New Feature): Add SIPAddParameter application and SIP_PARAMETER function # 2021-10-08 0.0.2 Asterisk (ASTERISK-29496): app_mf (New Feature): Add SendMF application and PlayMF AMI action # 2021-10-08 0.0.2 Asterisk (ASTERISK-29661): func_vmcount (Improvement): Add support for multiple mailboxes # 2021-10-08 0.0.2 Asterisk (ASTERISK-29656): func_channel (New Feature): Add CHANNEL_EXISTS function # 2021-10-08 0.0.2 Asterisk (ASTERISK-29578): app_queue (Bug Fix): Fix hints for included contexts # 2021-10-08 0.0.2 Asterisk (ASTERISK-29529): logger (Improvement): Add custom logging # 2021-10-07 0.0.1 Asterisk: app_tdd (New Feature): Add TddRx/TddTx applications and AMI events # 2021-10-07 0.0.1 Asterisk: app_softmodem (New Feature): Add Softmodem application (will eventually be removed and replaced with a new module) # TODO # 2021-10-07 0.0.1 Asterisk: func_dbchan (New Feature): Add DB_CHAN, DB_PRUNE functions # 2021-10-07 0.0.1 Asterisk: app_tonetest (New Feature): Add ToneSweep application # 2021-10-07 0.0.1 Asterisk: app_streamsilence (New Feature): Add StreamSilence application # 2021-10-07 0.0.1 Asterisk: app_frame (New Feature): Add SendFrame application # 2021-10-07 0.0.1 Asterisk (ASTERISK-29486): func_evalexten (New Feature): Add EVAL_EXTEN function # 2021-10-07 0.0.1 Asterisk: app_memory (New Feature): Add MallocTrim application # 2021-10-07 0.0.1 Asterisk (ASTERISK-29489): app_mail (New Feature): Add SendMail application # 2021-10-07 0.0.1 Asterisk: func_notchfilter (New Feature): Add NOTCH_FILTER function # 2021-10-07 0.0.1 Asterisk (ASTERISK-29432): func_ochannel (New Feature): Add OTHER_CHANNEL function # 2021-10-07 0.0.1 Asterisk (ASTERISK-29497): app_if (New Feature): Add If, EndIf, ExitIf applications # 2021-10-07 0.0.1 Asterisk (ASTERISK-29428): app_dial (Bug Fix): prevent infinite loop from hanging calls when Dial D option used with progress # 2021-10-07 0.0.1 Asterisk (ASTERISK-29455): translate.c (Bug Fix): prevent translator from choosing gsm to ulaw, all else equal # 2021-10-07 0.0.1 Asterisk (ASTERISK-29493): app_stack (New Feature): Add ReturnIf application # 2021-10-07 0.0.1 Asterisk (ASTERISK-20219): chan_iax2 (Improvement): Add encryption to RSA authentication (merged as of Oct. 2021, patch will be removed soon) ## End Change Log # User environment variables AST_CONFIG_DIR="/etc/asterisk" AST_VARLIB_DIR="/var/lib/asterisk" AST_SOURCE_PARENT_DIR="/usr/src" # Script environment variables AST_ALT_VER="" AST_MIN_PREFERRED_VER=20 AST_DEFAULT_MAJOR_VER=22 AST_NEXT_MAJOR_VER=24 AST_MAJOR_VER=$AST_DEFAULT_MAJOR_VER AST_MM_VER=0 AST_SOURCE_NAME="asterisk-${AST_DEFAULT_MAJOR_VER}-current" AST_RC_SOURCE_NAME="asterisk-${AST_DEFAULT_MAJOR_VER}-testing" # DAHDI_MM_VER="${DAHDI_VERSION:0:1}${DAHDI_VERSION:2:1}" Requires bash DAHDI_MM_VER=34 DAHDI_VERSION="3.4.0" #DAHLIN_SRC_URL="https://github.com/asterisk/dahdi-linux/releases/download/v${DAHDI_VERSION}/${DAHLIN_SRC_NAME}" #DAHTOOL_SRC_URL="https://github.com/asterisk/dahdi-tools/releases/download/v${DAHDI_VERSION}/${DAHTOOL_SRC_NAME}" DAHLIN_SRC_NAME="dahdi-linux-current.tar.gz" DAHTOOL_SRC_NAME="dahdi-tools-current.tar.gz" DAHLIN_SRC_URL="http://downloads.asterisk.org/pub/telephony/dahdi-linux/dahdi-linux-current.tar.gz" DAHTOOL_SRC_URL="http://downloads.asterisk.org/pub/telephony/dahdi-tools/dahdi-tools-current.tar.gz" LIBPRI_SOURCE_NAME="libpri-1.6.1" LIBSS7_VERSION="2.0.1" WANPIPE_SOURCE_NAME="wanpipe-current" # wanpipe-latest (7.0.38, 2024-02-05) ODBC_VER="3.1.14" CISCO_CM_SIP="cisco-usecallmanager-20.10.0" MIN_ARGS=1 FILE_DIR="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )" FILE_NAME=$( basename $0 ) # grr... why is realpath not in the POSIX standard? FILE_PATH="$FILE_DIR/$FILE_NAME" PATCH_DIR=https://docs.phreaknet.org/script OS=$(uname -s) OS_DIST_INFO="(lsb_release -ds || cat /etc/*release || uname -om ) 2>/dev/null | head -n1 | cut -d'=' -f2" OS_DIST_INFO=$(eval "$OS_DIST_INFO" | tr -d '"') PAC_MAN="apt-get" AST_SOUNDS_DIR="$AST_VARLIB_DIR/sounds/en" AST_MOH_DIR="$AST_VARLIB_DIR/moh" AST_MAKE="make" WGET="wget -q --no-cache" CURL="curl --silent --show-error -L -f" CURL_HEADERS_DUMPFILE="/tmp/ps_patchreq_headers.txt" CURL_DEBUG="curl -L --verbose" XMLSTARLET="/usr/bin/xmlstarlet" PATH="/sbin:$PATH" # in case su used without path # Defaults AST_CC=1 # Country Code (default: 1 - NANPA) AST_USER="" EXTRA_FEATURES=1 ALSA=0 WEAK_TLS=0 CHAN_SIP=0 ENHANCED_CHAN_SIP=0 SIP_CISCO=0 CHAN_SCCP=0 RPT_MODULES=0 CHAN_DAHDI=0 DAHDI_OLD_DRIVERS=0 DAHDI_DISABLE_VPMADT032=0 EMPULSE=1 # Automatically enable EMPULSE, cause why not? DAHDI_WANPIPE=0 # wanpipe only needed for Sangoma cards OPENR2=0 # Install OpenR2 DEVMODE=0 TEST_SUITE=0 FORCE_INSTALL=0 IGNORE_FAILURES=0 ENHANCED_INSTALL=1 PREFER_RELEASE_CANDIDATES=1 EXPERIMENTAL_FEATURES=0 G72X_CODECS=0 LIGHTWEIGHT=0 FAST_COMPILE=0 PKG_AUDIT=0 MANUAL_MENUSELECT=0 ENABLE_BACKTRACES=0 ASTKEYGEN=0 DEFAULT_PATCH_DIR="/tmp" # for new patches PHREAKNET_CLLI="" INTERLINKED_APIKEY="" BOILERPLATE_SOUNDS=0 SCRIPT_UPSTREAM="$PATCH_DIR/phreaknet.sh" DEBUG_LEVEL=0 FREEPBX_GUI=0 GENERIC_HEADERS=0 AUTOSET_KVERS=0 EXTERNAL_CODECS=0 RTPULSING=1 HEARPULSING=1 HAVE_COMPATIBLE_SPANDSP=1 PACMAN_UPDATED=0 # Internal flag PACMAN_NOUPDATE=0 OFFLINE_INSTALL=0 OFFLINE_PREP=0 OFFLINE_DIR="/tmp/phreakscript_offline_src" OVERLAY_DIR="" handler() { kill $BGPID } # FreeBSD doesn't support this escaping, so just do a simple print. echog() { if [ "$OS_DIST_INFO" = "FreeBSD" ]; then printf "%s\n" "$*" >&2; else printf "\e[32;1m%s\e[0m\n" "$*" >&2; fi } echoerr() { # https://stackoverflow.com/questions/2990414/echo-that-outputs-to-stderr if [ "$OS_DIST_INFO" = "FreeBSD" ]; then printf "%s\n" "$*" >&2; else printf "\e[31;1m%s\e[0m\n" "$*" >&2; fi } die() { echoerr "$1" exit 1 } if [ "$OS" != 'Linux' -a "$OS" != 'NetBSD' -a "$OS" != 'OpenBSD' -a "$OS" != 'FreeBSD' -a "$OS" != 'DragonFly' ]; then die "Your OS ($OS) is definitely not supported... aborting." fi if [ "$OS_DIST_INFO" = "FreeBSD" ]; then PAC_MAN="pkg" AST_SOURCE_PARENT_DIR="/usr/local/src" AST_CONFIG_DIR="/usr/local/etc/asterisk" AST_MAKE="gmake" XMLSTARLET="/usr/local/bin/xml" elif [ -f /etc/amazon-linux-release ]; then PAC_MAN="yum" elif [ "$OS_DIST_INFO" = "Sangoma Linux" ]; then # the FreePBX distro... PAC_MAN="yum" elif [ -f /etc/redhat-release ]; then PAC_MAN="yum" elif [ "$OS_DIST_INFO" = "SLES" ]; then PAC_MAN="zypper" elif [ "$OS_DIST_INFO" = "openSUSE Leap" ]; then PAC_MAN="zypper" elif [ "$OS_DIST_INFO" = "openSUSE Tumbleweed" ]; then PAC_MAN="zypper" elif [ -r /etc/arch-release ]; then PAC_MAN="pacman" elif [ -r /etc/alpine-release ]; then PAC_MAN="apk" elif [ ! -f /etc/debian_version ]; then # Default is Debian echoerr "Support for this platform ($OS_DIST_INFO) is limited... use at your own risk..." # Try to automatically detect the right package manager, at least... if which "yum" > /dev/null; then PAC_MAN="yum" elif which "dnf" > /dev/null; then PAC_MAN="dnf" elif which "pkg" > /dev/null; then PAC_MAN="pkg" AST_SOURCE_PARENT_DIR="/usr/local/src" elif ! which "apt-get" > /dev/null; then # apt-get is default, so check last echoerr "Failed to automatically determine your package manager... script will likely fail" fi fi update_packages() { printf "Updating package manager...\n" PACMAN_UPDATED=1 if [ "$PAC_MAN" = "apt-get" ]; then if [ $PACMAN_UPDATED = 0 ]; then # Ubuntu 22.04 prompts for restarts by default, inhibit this: https://askubuntu.com/questions/1367139/apt-get-upgrade-auto-restart-services if [ -f /etc/needrestart/needrestart.conf ]; then sed -i 's/#$nrconf{restart} = '"'"'i'"'"';/$nrconf{restart} = '"'"'a'"'"';/g' /etc/needrestart/needrestart.conf fi if [ -f /var/cache/apt/pkgcache.bin ] && [ "$FORCE_INSTALL" != "1" ]; then echo $(( ($(date +%s) - $(stat /var/cache/apt/pkgcache.bin -c %Y)) )) if [ $(( ($(date +%s) - $(stat /var/cache/apt/pkgcache.bin -c %Y)) )) -lt 300 ]; then # within last 5 minutes printf "Package updates occured recently, skipping...\n" return fi fi fi apt-get update -y if [ $? -ne 0 ]; then # If a system was installed from disc, and it remains in sources.list, # and disc is not present, we'll fail to update. # This will cause Asterisk's install_prereq.sh script to fail, # which will result in some prereqs failing to install, # leading to Asterisk's configure script failing. # User needs to comment out the cdrom, but we shouldn't do it ourselves # in case that's intentional. echoerr "Failed to update system, check /etc/apt/sources.list for issues" echoerr "*** Tip: If you have a cdrom line present and do not want" echoerr "*** to install updates/packages from disc, comment it out." exit 1 fi if [ "$ENHANCED_INSTALL" != "0" ]; then apt-get upgrade -y fi elif [ "$PAC_MAN" = "yum" ]; then yum update -y elif [ "$PAC_MAN" = "zypper" ]; then zypper --non-interactive update -y elif [ "$PAC_MAN" = "pacman" ]; then pacman -Syu --noconfirm elif [ "$PAC_MAN" = "apk" ]; then apk update elif [ "$PAC_MAN" = "pkg" ]; then pkg install -y pkg upgrade -y fi } install_package() { if [ $PACMAN_UPDATED -eq 0 ] && [ "$PACMAN_NOUPDATE" != "1" ]; then update_packages fi echo "Installing package(s): " $1 # unquoted, to trim any leading whitespace if [ "$PAC_MAN" = "apt-get" ]; then apt-get install -y $1 elif [ "$PAC_MAN" = "yum" ]; then yum install -y --allowerasing $1 elif [ "$PAC_MAN" = "zypper" ]; then zypper --non-interactive install -y --force-resolution $1 elif [ "$PAC_MAN" = "pacman" ]; then pacman -Sy --noconfirm $1 elif [ "$PAC_MAN" = "apk" ]; then apk add $1 elif [ "$PAC_MAN" = "pkg" ]; then pkg install -y $1 else echoerr "Not sure how to satisfy requirement: $1" fi if [ $? -ne 0 ]; then # If a required package can't be installed, fail fast and exit die "Package installation failed: $1" fi } # If which is not installed, get that before anything if ! which "which" > /dev/null; then printf "which does not appear to be present... installing...\n" if [ "$PAC_MAN" = "apt-get" ]; then install_package "debianutils" elif [ "$PAC_MAN" = "yum" ]; then install_package "which" elif [ "$PAC_MAN" = "pacman" ]; then install_package "which" elif [ "$PAC_MAN" = "apk" ]; then install_package "apk" fi if ! which "which" > /dev/null; then echoerr "which is still not installed?" fi fi ensure_installed() { if ! which "$1" > /dev/null; then install_package "$1" fi } # Now that packages are detected, install wget if necessary ensure_installed "wget" # Wget2 does not support --show-progress, uses --force-progress instead if [ "$PAC_MAN" = "apk" ]; then # Alpine's wget is part of BusyBox and doesn't have any progress options anyways WGET="$WGET" fi if [ "$WGET" = "" ]; then WGET_VERSION=$( wget --version | head -n 1 ) if [ "${WGET_VERSION#*"Wget2"}" != "$WGET_VERSION" ]; then WGET="$WGET --force-progress" else WGET="$WGET --show-progress" fi fi if test -h /bin/ls && readlink /bin/ls | grep -q "busybox" && [ "$PAC_MAN" != "apk" ]; then # wget is useless on BusyBox (at least with AstLinux, but not Alpine Linux), use curl instead WGET="curl -s -O" fi if [ "$OS_DIST_INFO" = "Sangoma Linux" ]; then # the FreePBX distro... WGET="wget -q" # --show-progress not supported by yum/Sangoma Linux? fi # If getopt is not present, install it if ! which "getopt" > /dev/null; then install_package "util-linux" # named the same in most every distro fi if [ "$PAC_MAN" = "pacman" ]; then if ! which "hostname" > /dev/null; then install_package "net-tools" fi elif [ "$PAC_MAN" != "pkg" ]; then # `hostname' is part of base on FreeBSD; do not install ensure_installed "hostname" fi AST_CONFIGURE_FLAGS="--with-jansson-bundled --with-libjwt-bundled" if [ "$PAC_MAN" = "apk" ]; then AST_CONFIGURE_FLAGS="$AST_CONFIGURE_FLAGS --without-pjproject-bundled --without-execinfo" else AST_CONFIGURE_FLAGS="$AST_CONFIGURE_FLAGS --with-pjproject-bundled" # default fi phreakscript_info() { printf "%s" "Hostname: " hostname printf "OS: %s\n" "$OS" printf "Dist Info: " echo $OS_DIST_INFO uname -a echo "Package Manager: $PAC_MAN" echo "wget version: $WGET_VERSION" gcc -v 2>&1 | grep "gcc version" asterisk -V 2> /dev/null # Asterisk might or might not exist... if [ -d /etc/dahdi ]; then dahdi_cfg -tv 2>&1 | grep "ersion" fi printf "%s" "PhreakScript " grep "# v" $FILE_PATH | head -1 | cut -d'v' -f2 echo "https://github.com/InterLinked1/phreakscript" echo "(C) 2021-2024 PhreakNet - https://portal.phreaknet.org https://docs.phreaknet.org" echo "To report bugs or request feature additions, please report at https://issues.interlinked.us (also see https://docs.phreaknet.org/#contributions) and/or post to the PhreakNet mailing list: https://groups.io/g/phreaknet" | fold -s -w 120 } if [ "$1" = "commandlist" ]; then echo "about help version examples info wizard make man mancached install source experimental dahdi odbc installts fail2ban apiban freepbx pulsar sounds boilerplate-sounds ulaw remsil uninstall uninstall-all bconfig config keygen keyperms update astpr patch genpatch alembic freedisk topdir topdisk enable-swap disable-swap start restart stop kill forcerestart ban applist funclist dialplanfiles validate trace paste iaxping pcap pcaps sngrep enable-backtraces backtrace backtrace-only rundump threads reftrace valgrind cppcheck docverify runtests runtest stresstest ccache fullpatch docgen mkdocs pubdocs edit" exit 0 fi usage() { #complete -W "make help install installts pulsar sounds config keygen edit genpatch patch update upgrade trace backtrace" phreaknet # has to be manually entered, at present #source ~/.bash_profile echo "Usage: phreaknet [command] [options] Commands: *** Getting Started *** about About PhreakScript help Program usage version Program version examples Example usages info System info wizard Interactive installation command wizard *** First Use / Installation *** make Add PhreakScript to path man Compile and install PhreakScript man page mancached Install cached man page (may be outdated) install Install or upgrade PhreakNet-enhanced Asterisk source Prepare PhreakNet-enhanced Asterisk source code only offline Prepare offline installation source for disconnected environments experimental Add experimental features to an existing Asterisk source dahdi Install or upgrade PhreakNet-enhanced DAHDI wanpipe Install wanpipe g72x Add G.723.1/G.729 support to an existing installation odbc Install ODBC (MariaDB) installts Install Asterisk Test Suite fail2ban Install Asterisk fail2ban configuration apiban Install apiban client freepbx Install FreePBX GUI (not recommended) pulsar Install Revertive Pulsing simulator sounds Install Pat Fleet sound library boilerplate-sounds Install boilerplate sounds only ulaw Convert wav to ulaw (specific file or all in current directory) remsil Remove silence from file(s) uninstall Uninstall Asterisk, but leave configuration behind uninstall-all Uninstall Asterisk, and completely remove all traces of it (configs, etc.) *** Initial Configuration *** bconfig Install PhreakNet boilerplate config config Install PhreakNet boilerplate config and autoconfigure PhreakNet variables keygen Install and update PhreakNet RSA keys keyperms Ensure that TLS keys are readable *** Maintenance *** update Update PhreakScript astpr Apply an Asterisk PR patch patch Patch PhreakNet Asterisk configuration genpatch Generate a PhreakPatch alembic Generate an Asterisk Alembic revision freedisk Free up disk space topdir Show largest directories in current directory topdisk Show top files taking up disk space enable-swap Temporarily allocate and enable swap file disable-swap Disable and deallocate temporary swap file start Fully start DAHDI, wanpipe, and Asterisk restart Fully restart DAHDI, wanpipe, and Asterisk stop Fully stop DAHDI, wanpipe, and Asterisk kill Forcibly kill Asterisk forcerestart Forcibly restart Asterisk ban Manually ban an IP address using iptables *** Debugging *** dialplanfiles Verify what files are being parsed into the dialplan validate Run dialplan validation and diagnostics and look for problems trace Capture a CLI trace and upload to InterLinked Paste paste Upload an arbitrary existing file to InterLinked Paste iaxping Check if a remote IAX2 listener is reachable pcap Perform a packet capture, optionally against a specific IP address pcaps Same as pcap, but open in sngrep afterwards sngrep Perform SIP message debugging enable-backtraces Enables backtraces to be extracted from the core dumper (new or existing installs) backtrace Use astcoredumper to process a backtrace and upload to InterLinked Paste backtrace-only Use astcoredumper to process a backtrace rundump Get a backtrace from the running Asterisk process threads Get information about current Asterisk threads reftrace Process reference count logs *** Developer Debugging *** valgrind Run Asterisk under valgrind cppcheck Run cppcheck on Asterisk for static code analysis *** Development & Testing *** docverify Show documentation validation errors and details runtests Run differential PhreakNet tests runtest Run any specified test (argument to command) stresstest Run any specified test multiple times in a row fullpatch Redownload an entire PhreakNet source file ccache Globally install ccache to speed up recompilation *** Miscellaneous *** docgen Generate Asterisk user documentation, using astdocgen (deprecated) mkdocs Generate Asterisk user documentation, using Asterisk documentation generator pubdocs Generate Asterisk user documentation (deprecated) applist List Asterisk dialplan applications in current source funclist List Asterisk dialplan functions in current source edit Edit PhreakScript touch Show PhreakScript file path and last modification Options: -b, --backtraces Enables getting backtraces -c, --cc Country Code (default is 1) -d, --dahdi Install DAHDI -f, --force Force install or config -h, --help Display usage -n, --no-rc Do not install release candidate versions -o, --flag-test Option flag test -s, --sip Install chan_sip instead of or in addition to chan_pjsip -t, --testsuite Compile with developer support for Asterisk test suite and unit tests -u, --user User as which to run Asterisk (non-root) -v, --version Specific version of Asterisk to install (M.m.b e.g. 18.8.0). Also, see --vanilla. -w, --weaktls Allow less secure TLS versions down to TLS 1.0 (default is 1.2+) --api-key config: InterLinked API key --clli config: CLLI code --disa config: DISA number --rotate keygen: Rotate/create keys --upstream update: Specify upstream source --debug trace: Debug level (default is 0/OFF, max is 10) --boilerplate sounds: Also install boilerplate sounds --audit install: Audit package installation --devmode install: Compile with devmode enabled --experimental install: Install experimental features that may not be production ready --g72x install: Compile with support for G.723.1/G.729 codecs --fast install: Compile as fast as possible --lightweight install: Only install basic, required modules for basic Asterisk functionality --alsa install: Ensure ALSA library detection exists in the build system. This does NOT readd the deprecated/removed chan_alsa module. --cisco install: Add full support for Cisco Call Manager phones (chan_sip only) --rpt install: Add radio repeater modules --sccp install: Install chan_sccp channel driver (Cisco Skinny) --overlay install: Overlay an external directory tree into the Asterisk source, applying any Makefile.diff patches present --drivers install: Also install DAHDI drivers removed in 2018 --disable-vpmadt032 install: Disable VPMADT032 echo canceller driver from building (temporarily required on newer kernels) --generic install: Use generic kernel headers that do not match the installed kernel version --autokvers install: Automatically pass the appropriate value for KVERS for DAHDI compilation (only needed on non-Debian systems) --extcodecs install: Specify this if any external codecs are being or will be installed --freepbx install: Install FreePBX GUI (not recommended) --manselect install: Manually run menuselect yourself --minimal install: Do not upgrade the kernel or install nonrequired dependencies (such as utilities that may be useful on typical Asterisk servers) --vanilla install: Do not install extra features or enhancements. Bug fixes are always installed. (May be required for older versions) --offline install: Use an offline installation source for disconnected environments / do not check for PhreakScript updates --noupdate install: Do not update the package manager " phreakscript_info exit 2 } get_newest_astdir() { if [ "$OS_DIST_INFO" = "FreeBSD" ]; then ls -d ./*/ | cut -c 3- | grep "^asterisk" | tail -1 # FreeBSD doesn't have the same GNU ls options: https://stackoverflow.com/a/31603260/ else ls -d -v */ | grep "^asterisk" | tail -1 fi } get_newest_dahlindir() { if [ "$OS_DIST_INFO" = "FreeBSD" ]; then ls -d ./*/ | cut -c 3- | grep "^dahdi-linux" | tail -1 # FreeBSD doesn't have the same GNU ls options: https://stackoverflow.com/a/31603260/ else ls -d -v */ | grep "^dahdi-linux" | tail -1 fi } cd_ast() { cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd $AST_SRC_DIR } ast_kill() { pid=`cat /var/run/asterisk/asterisk.pid` if [ ${#pid} -eq 0 ]; then echoerr "Asterisk is not currently running." elif ! kill -9 $pid; then echoerr "Failed to stop Asterisk ($pid)" else echog "Successfully killed Asterisk ($pid)" fi } start_wanpipe() { if which wanrouter > /dev/null; then printf "Starting wanpipe\n" service wanrouter start 2>&1 > /dev/null if [ $? -ne 0 ]; then wanrouter start # If the wanrouter service isn't installed, start manually fi wanrouter status fi } stop_wanpipe() { if which wanrouter > /dev/null; then service wanrouter status 2>&1 > /dev/null # The service may not be installed, but wanrouter may be running nonetheless if [ $? -eq 0 ]; then printf "Stopping wanpipe spans\n" if ! wanrouter stop all; then # stop all T1 spans on wanpipe die "Failed to stop wanpipe spans" elif ! service wanrouter stop; then # stop wanpipe service die "Failed to stop wanrouter" elif ! modprobe -r dahdi_echocan_mg2; then # remove DAHDI echocan die "Failed to remove DAHDI echocan" fi else wanrouter status if [ $? -eq 0 ]; then printf "Unsure if wanpipe is in use, stopping it just to be sure...\n" wanrouter stop all if [ $? -ne 0 ]; then die "Failed to stop wanpipe, aborting to prevent potential system crash - please manually stop wanpipe and rerun" fi fi fi wanrouter status | grep "stopped" if [ $? -ne 0 ]; then die "Could not verify wanpipe is really stopped... to prevent system instability, please manually stop it and rerun" fi else printf "wanpipe not present on this system, no need to stop it\n" fi } get_ast_pid() { if test -h /bin/ls && [[ `readlink /bin/ls` =~ busybox ]]; then # Busy Box doesn't support ps -u or -x astpid=$( ps | grep asterisk | grep -v grep | grep -v canary | grep -v rasterisk | head -n1 | xargs | cut -d' ' -f1 ) else astpid=$( ps -aux | grep "asterisk" | grep -v "grep" | head -n 1 | xargs | cut -d' ' -f2 ) fi echo $astpid } stop_telephony() { astpid=$( get_ast_pid ) if [ "$astpid" != "" ]; then if [ "$1" = "1" ]; then # Only need to unload chan_dahdi if it's loaded rasterisk -x "module show like chan_dahdi" | grep "chan_dahdi" if [ $? -eq 0 ]; then rasterisk -x "module unload chan_dahdi" | grep "Unloaded chan_dahdi" if [ $? -ne 0 ]; then die "chan_dahdi could not be unloaded" fi fi else service asterisk stop # stop Asterisk astpid=$( get_ast_pid ) if [ "$astpid" != "" ]; then # if that didn't work, kill it manually kill -9 $astpid printf "Killed Asterisk process %s\n" "$astpid" else printf "Asterisk not currently running...\n" fi fi else printf "Asterisk not currently running...\n" fi lsmod | grep dahdi curdrivers=`lsmod | grep "dahdi " | xargs | cut -d' ' -f4-` # Space intentionally included, add dahdi_vpmadt032_loader later manually printf "Current drivers: --- %s ---\n", "$curdrivers" stop_wanpipe echo "$curdrivers" | tr ',' '\n' | xargs -i sh -c 'echo Stopping driver: {}; modprobe -r {}' modprobe -r dahdi_vpmadt032_loader modprobe -r dahdi_voicebus service dahdi status # WARNING WARNING WARNING # It seems that on a system where wanpipe is in use, # stopping DAHDI without ensuring wanpipe is really stopped # will lead to the system crashing # Noticed this since wanpipe wasn't registered as a service, # so "service wanpipe status" wouldn't work, even though wanpipe was installed. # This is why there are now checks above to ensure wanrouter is stopped before stopping DAHDI. # Also noted here: https://sangomakb.atlassian.net/wiki/spaces/TC/pages/53772451/Driver+Debugging if [ $? -eq 0 ]; then printf "Stopping DAHDI...\n" if ! service dahdi stop; then printf "Returned %d\n" $? die "Failed to stop DAHDI" elif ! modprobe -r dahdi; then die "Failed to remove DAHDI from kernel" elif ! service dahdi stop; then # do it again, just to be sure die "Failed to stop DAHDI the second time" fi printf "DAHDI shutdown complete\n" else printf "DAHDI is not running, skipping...\n" modprobe -r dahdi # In case the service was already stopped but dahdi module was not yet unloaded fi } # Completely restart wanpipe, DAHDI (and any DAHDI drivers), and Asterisk # This is surprisingly complicated, and can be dangerous if done incorrectly # $1 to restart without completely restarting Asterisk restart_telephony() { stop_telephony "$1" start_telephony } start_telephony() { if [ ! -f /etc/udev/rules.d/dahdi.rules ]; then echoerr "DAHDI udev rules are missing..." fi modprobe --first-time dahdi if [ $? -ne 0 ]; then echoerr "DAHDI is still running... stop these modules and try again" lsmod | grep "dahdi" | xargs | cut -d' ' -f4- # No space in this grep exit 1 fi start_wanpipe # This can fail, if wanpipe isn't being used, and that's fine printf "DAHDI hardware:\n" dahdi_hardware # List DAHDI hardware. The dahdi module must first be running for this to work. # Start drivers for any telephony cards, which is needed for span assignment # sed: Each one ends in - or +, need to ignore that for driver in $( dahdi_hardware | awk '{print $2}' | tr ',' '\n' | sed 's/.$//' ) ; do printf "Starting driver: %s... " "$driver" modprobe --first-time $driver if [ $? -ne 0 ]; then # If modprobe fails, it will print an error ending in a newline, no need to add one here echoerr "Failed to start driver $driver" else printf "started!\n" fi done # Dump detected configuration since span stuff is VERY fickle and prone to breakage printf "DAHDI module options: " cat /etc/modprobe.d/dahdi.conf # Dump DAHDI module options AUTO_ASSIGN_SPANS=$( cat /sys/module/dahdi/parameters/auto_assign_spans | tr -d '\n' ) printf "DAHDI span auto-assignment: %d\n" "$AUTO_ASSIGN_SPANS" printf "Detected spans:\n" dahdi_span_assignments list # List detected spans # Get the spans assigned. printf "Assigning DAHDI spans...\n" dahdi_span_assignments remove if [ "$AUTO_ASSIGN_SPANS" = "0" ]; then printf "Manually assigning spans according to /etc/dahdi/assigned-spans.conf\n" dahdi_span_assignments add else printf "Automatically assigning spans, ignoring /etc/dahdi/assigned-spans.conf\n" num_spans=$( dahdi_span_assignments list | wc -l ) if [ $num_spans -gt 1 ]; then echoerr "Detected that this machine has more than 1 DAHDI span." echoerr "You are HIGHLY ENCOURAGED to assign the span order explicitly in /etc/dahdi/assigned-spans.conf!" echoerr "To do this, add 'options dahdi auto_assign_spans=0' to /etc/modprobe.d/dahdi.conf and run 'phreaknet restart'" sleep 1 fi dahdi_span_assignments auto fi # Run dahdi_genconf to validate that the spans are assigned properly. # However, don't actually replace /etc/dahdi/system.conf, since that # would overwrite span configuration and break the system setup... # just use a temporary configuration file to catch it and compare. printf "Generating DAHDI channel configuration and checking differences...\n" # XXX BUGBUG There seems to be a bug where if (and even if?) dahdi_span_assignments auto is not run # (even if we're manually assigning spans), dahdi_genconf will just hang. # We can kill it and all the gubbins DAHDI spawns with "pkill dahdi", # and then things seem to work. if [ -f /etc/dahdi/system.conf ]; then # Per the BUGBUG note above: If dahdi_genconf is still running after 2 seconds, kill it and proceed. Don't ask me to explain it, but it works... DAHDI_CONF_FILE=/tmp/system.conf dahdi_genconf system & (sleep 2; ps -aux | grep "dahdi_genconf" | grep -v "grep" > /dev/null && pkill dahdi && echoerr "Forcibly killed dahdi_genconf") # The second time around, it SHOULD work instantly and properly dump dahdi_genconf output into /tmp/system.conf DAHDI_CONF_FILE=/tmp/system.conf dahdi_genconf system & (sleep 2; ps -aux | grep "dahdi_genconf" | grep -v "grep" > /dev/null && pkill dahdi && echoerr "Forcibly killed dahdi_genconf a second time???") # This will show us what's different between the system.conf dahdi_genconf just wrote to /tmp/system.conf # and the actual /etc/dahdi/system.conf # There are likely to be a few changes, but there shouldn't be anything major if everything went well. # If there's a big deviation, then manual intervention is likely required. diff -U 0 /etc/dahdi/system.conf /tmp/system.conf # Output with no context, since basically every line is unique already else dahdi_genconf -vvvvv fi # /etc/dahdi/modules isn't populated automatically, and this is needed for modules to get loaded automatically at boot # Regardless, you can also run "phreaknet restart" to get things started manually... # Re-run whenever the installed hardware changes dahdi_genconf modules # Finally, run dahdi_cfg printf "Applying DAHDI channel configuration...\n" dahdi_cfg -v 2>/dev/null | grep "to configure" # Show number of channels that will be configured if [ $? -ne 0 ]; then lsdahdi die "DAHDI initialization failed... check to ensure all your spans are online and in the expected order" fi printf "DAHDI channel configuration applied successfully!\n" # Finally, make sure the DAHDI service is running so that systemd can keep track of it... service dahdi start # Load chan_dahdi if Asterisk was already running /usr/sbin/rasterisk -x "module load chan_dahdi" if [ $? -ne 0 ]; then # Start Asterisk if it's not running already service asterisk start if [ ! -f /var/run/asterisk/asterisk.ctl ]; then printf "Asterisk service file is ineffectual, starting Asterisk manually...\n" /usr/sbin/asterisk -g # The service didn't do squat, actually start Asterisk if [ $? -ne 0 ]; then die "Asterisk failed to start" fi printf "Waiting for Asterisk to start...\n" sleep 3 # Wait for Asterisk to fully boot # Wait some more if needed... if [ ! -f /var/run/asterisk/asterisk.ctl ]; then sleep 3 fi if [ ! -f /var/run/asterisk/asterisk.ctl ]; then sleep 3 fi fi /usr/sbin/rasterisk -x "module load chan_dahdi" fi # The ultimate test is what DAHDI channels actually show up in Asterisk /usr/sbin/rasterisk -x "dahdi show channels" || die "Telephony initialization failed (Asterisk not started)" echog "Telephony initialization completed" } assert_root() { if [ $(id -u) -ne 0 ]; then echoerr "PhreakScript make must be run as root. Aborting..." exit 2 fi } download_if_missing() { if [ ! -f "$1" ]; then $WGET "$2" else printf "Audio file already present, not overwriting: %s\n" "$1" fi } make_file_readable() { # $1 = file to make readable. bottomdir=`dirname "$1"` realfilename=`printf '%s' "$1" | xargs | cut -d' ' -f 1` if [ ! -f "$realfilename" ]; then # If the file doesn't exist, forget about it, and don't emit an error. return fi printf "Processing key: %s\n" "$realfilename" newfilename=`realpath $realfilename` if [ "${#newfilename}" -gt 0 ]; then # If we have realpath, follow symlinks too. if [ "$newfilename" != "$realfilename" ]; then printf "Followed symlink from %s to %s\n" "$realfilename" "$newfilename" realfilename="$newfilename" fi else echoerr "realpath is not supported on this system" fi printf "chmod -R +r %s\n" "$bottomdir" chmod -R +r "$bottomdir" # This directory should contain only keys. cd "$bottomdir" if [ $? -eq 0 ]; then chmod +r "$realfilename" # Make the file itself readable. # Make all its parent directories readable. # FYI: Stop when we get to /etc, because if you chmod 744 /etc, you will have a VERY BAD DAY. # If you're reading this and already having a bad day, do chmod 755 /etc and that will fix it. # You need +x permissions to go into directories, not just read permissions. while [ `pwd` != "/" ] && [ `pwd` != "/etc" ] ; do ls -dla $curdir curdir=`pwd` printf "chmod 755 %s\n" "$curdir" cd .. chmod 755 $curdir ls -dla $curdir if [ $? -ne 0 ]; then echoerr "Failed to set key permissions" break fi done fi } make_keys_readable() { # Bad things will happen if Asterisk cannot read the TLS keys that it needs. # This will do a directory traversal to the location(s) of TLS keys and make sure # that the keys and all their parent directories are readable. If any parent # directory in the chain doesn't have the right permissions then things will fail. # Save the current working directory. curdir=`pwd` # grep commands: Don't show filename in output. Ignore files with <. Remove leading whitespace, eliminate lines beginning with ; (comment), take only the first word # tlscertfile used by http.conf and sip.conf # Simpler methods of looping on each line of output only work in bash and not POSIX sh echo -n "" > /tmp/astkeylist.txt grep -h -R "tlscertfile" $AST_CONFIG_DIR | grep -v '<' | cut -d'=' -f 2 | sed 's/^[ \t]*//' | sed '/^;/d' | grep -e ".pem" -e ".key" | cut -d' ' -f 1 >> /tmp/astkeylist.txt grep -h -R "priv_key_file" $AST_CONFIG_DIR | grep -v '<' | cut -d'=' -f 2 | sed 's/^[ \t]*//' | sed '/^;/d' | grep -e ".pem" -e ".key" | cut -d' ' -f 1 >> /tmp/astkeylist.txt while read filename do make_file_readable "$filename" done < /tmp/astkeylist.txt # POSIX compliant rm /tmp/astkeylist.txt cd $curdir # Restore original working directory. } # $1 = include Asterisk-only pre-reqs (not needed for DAHDI-only builds) install_prereq() { # wget should already be installed at this point, so it's not included here PREREQ_PACKAGES="" RHEL_MAJOR_VERSION_8=0 printf "Installing prerequisites for %s...\n" "$OS_DIST_INFO" # Even if we are just installing DAHDI (without Asterisk), $CHAN_DAHDI should be set to 1 at this point. # libnewt-dev is needed for newt, which dahdi_tool requires. If it's not available, it won't get built. # dwarves is needed for pahole, which DAHDI Linux install needs for BTF generation if [ "$PAC_MAN" = "apt-get" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES git patch gawk gcc pkg-config autoconf automake m4 libtool build-essential curl" if [ "$CHAN_DAHDI" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES libnewt-dev dwarves" fi if [ "$1" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES curl subversion libcurl4-openssl-dev" if [ "$ENHANCED_INSTALL" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES dnsutils bc mpg123 tcpdump festival" fi if [ "$DEVMODE" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES xmlstarlet" # only needed in developer mode for doc validation. fi if [ "$RPT_MODULES" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES libusb-dev" fi fi PREREQ_PACKAGES="$PREREQ_PACKAGES libedit-dev" # Ubuntu also needs this package # apt-get install libcurl3-gnutls=7.64.0-4+deb10u2 # fix git clone not working: upvoted comment at https://superuser.com/a/1642989 PREREQ_PACKAGES="$PREREQ_PACKAGES debconf-utils" # used to feed the country code non-interactively elif [ "$PAC_MAN" = "yum" ]; then # Format is something like: Rocky Linux release 8.10 (Green Obsidian) RHEL_MAJOR_VERSION=$( cat /etc/redhat-release | cut -d'(' -f1 | awk '{print $(NF)}' | cut -d'.' -f1 ) if [ -f /etc/redhat-release ] && [ "$RHEL_MAJOR_VERSION" = "8" ]; then # RHEL or Rocky Linux major version 8 RHEL_MAJOR_VERSION_8=1 fi PREREQ_PACKAGES="$PREREQ_PACKAGES git patch gawk gcc gcc-c++ pkg-config autoconf automake m4 libtool" if [ "$CHAN_DAHDI" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES newt-devel" if [ $RHEL_MAJOR_VERSION_8 -eq 0 ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES dwarves" # Not available on 8.9 fi fi if [ "$1" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES subversion libuuid-devel libxml2-devel sqlite-devel openssl-devel" if [ $RHEL_MAJOR_VERSION_8 -eq 0 ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES libedit-devel" # Required on Fedora, may fail initially on Rocky Linux 8.9 fi fi elif [ "$PAC_MAN" = "zypper" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES git-core make patch gawk autoconf automake libtool subversion bzip2 gcc-c++" if [ "$CHAN_DAHDI" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES newt-devel dwarves" fi if [ "$1" = "1" ]; then # TODO Some of these should be in Asterisk's install_prereq script PREREQ_PACKAGES="$PREREQ_PACKAGES libedit-devel libuuid-devel libxml2-devel sqlite3-devel openssl-devel" fi elif [ "$PAC_MAN" = "pacman" ]; then # base-devel is needed for pod2man PREREQ_PACKAGES="$PREREQ_PACKAGES git make patch gawk gcc pkg-config autoconf automake m4 libtool base-devel" if [ "$CHAN_DAHDI" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES libnewt pahole" fi if [ "$1" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES subversion libedit" if [ "$RPT_MODULES" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES libusb libusb-compat alsa-utils" fi fi elif [ "$PAC_MAN" = "apk" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES build-base git curl" if [ "$CHAN_DAHDI" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES autoconf automake m4 libtool newt-dev" fi if [ "$1" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES libedit-dev libxml2-dev subversion openssl-dev" PREREQ_PACKAGES="$PREREQ_PACKAGES util-linux-dev" # uuid development fi elif [ "$PAC_MAN" = "pkg" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES git gmake" if [ "$CHAN_DAHDI" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES newt dwarves" fi if [ "$1" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES curl subversion e2fsprogs-libuuid sqlite3 xmlstarlet libsysinfo" if [ "$ENHANCED_INSTALL" = "1" ]; then PREREQ_PACKAGES="$PREREQ_PACKAGES tcpdump mpg123 bind-tools" # bind-tools for dig fi fi else echoerr "Could not determine what package manager to use..." return fi install_package "$PREREQ_PACKAGES" # Any followup work if [ "$PAC_MAN" = "yum" ]; then # Stop on RHEL systems without an active subscription since packages are failing to install if ! which git > /dev/null; then die "Git does not appear to be installed" fi if [ "$1" = "1" ]; then if [ $RHEL_MAJOR_VERSION_8 -eq 1 ]; then # Rocky Linux seems to be missing libedit-devel, and this package is "missing" printf "Installing libedit-devel from the devel repo\n" dnf --enablerepo=devel install -y libedit-devel fi fi elif [ "$PAC_MAN" = "pacman" ]; then # pod2man isn't in the default path, we need to add it export PATH="/usr/bin/core_perl:$PATH" elif [ "$PAC_MAN" = "pkg" ]; then if [ "$1" = "1" ]; then pkg info e2fsprogs-libuuid if [ $? -ne 0 ]; then if [ ! -d /usr/ports/misc/e2fsprogs-libuuid/ ]; then # https://www.freshports.org/misc/e2fsprogs-libuuid/ portsnap fetch extract fi cd /usr/ports/misc/e2fsprogs-libuuid/ && make install clean # for uuid-dev pkg install misc/e2fsprogs-libuuid fi fi fi # Dump gcc version gcc -v 2>&1 | grep "gcc version" # /usr/local/src doesn't exist by default on FreeBSD if [ ! -d $AST_SOURCE_PARENT_DIR ]; then mkdir $AST_SOURCE_PARENT_DIR fi } download_github_file() { # $1 = repo, e.g. asterisk/asterisk, $2 = branch, $3 = file, $4 = destination file (default: same as $3) dstfile="$4" if [ "$dstfile" = "" ]; then dstfile="$3" fi # XXX doesn't work quite: $CURL -o "$dstfile" -H "Accept: application/vnd.github.v3.raw" "https://api.github.com/repos/$1/contents/$3?ref=$2" if [ $? -ne 0 ]; then echoerr "Failed to download https://api.github.com/repos/$1/contents/$3?ref=$2 - falling back to direct download" $WGET "https://raw.githubusercontent.com/$1/$2/$3" -O "$dstfile" fi } download_github_module() { # $1 = repo, e.g. asterisk/asterisk, $2 = branch, $3 = file, $4 = destination module filename download_github_file "$1" "$2" "$3" "$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/$4" } download_boilerplate() { download_github_file "InterLinked1/phreaknet-boilerplate" "master" $1 $2 } install_boilerplate() { if [ ! -d $AST_CONFIG_DIR/dialplan ]; then mkdir -p $AST_CONFIG_DIR/dialplan cd $AST_CONFIG_DIR/dialplan elif [ ! -d $AST_CONFIG_DIR/dialplan/phreaknet ]; then mkdir -p $AST_CONFIG_DIR/dialplan/phreaknet cd $AST_CONFIG_DIR/dialplan/phreaknet else if [ "$FORCE_INSTALL" != "1" ]; then echoerr "It looks like you already have configs. Proceed and overwrite? (y/n) " printf '\a' read -r -p "" ans if [ "$ans" != "y" ]; then echo "Cancelling config installation." exit 1 fi fi fi printf "Backing up %s configs, just in case...\n" $AST_CONFIG_DIR mkdir -p /tmp/etc_asterisk cp $AST_CONFIG_DIR/*.conf /tmp/etc_asterisk # do we really trust users not to make a mistake? backup to tmp, at least... EXTENSIONS_CONF_FILE="extensions.conf" if [ -f $AST_CONFIG_DIR/freepbx_module_admin.conf ]; then printf "%s\n" "Detected FreePBX installation..." EXTENSIONS_CONF_FILE="extensions_custom.conf" fi printf "%s" "Installing boilerplate code to " pwd printf "\n" download_boilerplate "dialplan/verification.conf" verification.conf download_boilerplate "dialplan/phreaknet.conf" phreaknet.conf download_boilerplate "dialplan/phreaknet-aux.conf" phreaknet-aux.conf download_boilerplate "dialplan/phreaknet-coin.conf" phreaknet-coin.conf cd $AST_CONFIG_DIR pwd download_boilerplate "asterisk.conf" $AST_CONFIG_DIR/asterisk.conf download_boilerplate "modules.conf" $AST_CONFIG_DIR/modules.conf download_boilerplate "chan_dahdi.conf" $AST_CONFIG_DIR/chan_dahdi.conf download_boilerplate "iax.conf" $AST_CONFIG_DIR/iax.conf download_boilerplate "sip.conf" $AST_CONFIG_DIR/sip.conf download_boilerplate "pjsip.conf" $AST_CONFIG_DIR/pjsip.conf download_boilerplate "musiconhold.conf" $AST_CONFIG_DIR/musiconhold.conf download_boilerplate "extensions.conf" $AST_CONFIG_DIR/$EXTENSIONS_CONF_FILE download_boilerplate "verify.conf" $AST_CONFIG_DIR/verify.conf printf "%s\n" "Boilerplate config installed! Note that these files may still require manual editing before use." } install_boilerplate_sounds() { cd $AST_SOUNDS_DIR mkdir -p custom/signal cd custom/signal download_if_missing "dialtone.ulaw" "https://audio.phreaknet.org/stock/dialtone.ulaw" download_if_missing "busy.ulaw" "https://audio.phreaknet.org/stock/busy.ulaw" download_if_missing "reorder.ulaw" "https://audio.phreaknet.org/stock/reorder.ulaw" download_if_missing "ccad.ulaw" "https://audio.phreaknet.org/stock/ccad.ulaw" download_if_missing "acbn.ulaw" "https://audio.phreaknet.org/stock/acbn.ulaw" cd $AST_MOH_DIR mkdir -p ringback cd ringback download_if_missing "ringback.ulaw" "https://audio.phreaknet.org/stock/ringback.ulaw" } install_freepbx_checks() { if [ "$AST_USER" != "asterisk" ]; then echoerr "FreePBX requires installing as asterisk user (use --user asterisk)" exit 2 fi if [ -f $AST_CONFIG_DIR/extensions.conf ]; then if [ "$FORCE_INSTALL" != "1" ]; then echoerr "An existing $AST_CONFIG_DIR/extensions.conf has been detected on the file system. Installing FreePBX will overwrite ALL OF YOUR CONFIGURATION!!!" printf "%s\n" "If this is intended, rerun the command with the -f or --force flag. Be sure to backup your configuration first if desired." exit 2 fi fi } install_freepbx() { # https://www.atlantic.net/vps-hosting/how-to-install-asterisk-and-freepbx-on-ubuntu-20-04/ FREEPBX_VERSION="freepbx-16.0-latest" # avoid using if possible # PHP 7.4 is supported: https://www.freepbx.org/freepbx-16-is-now-released-for-general-availability/ apt-get -y install apache2 mariadb-server php libapache2-mod-php7.4 php7.4 php-pear php7.4-cgi php7.4-common php7.4-curl php7.4-mbstring php7.4-gd php7.4-mysql php7.4-bcmath php7.4-zip php7.4-xml php7.4-imap php7.4-json php7.4-snmp cd $AST_SOURCE_PARENT_DIR $WGET http://mirror.freepbx.org/modules/packages/freepbx/$FREEPBX_VERSION.tgz tar -xvzf $FREEPBX_VERSION.tgz cd $AST_SOURCE_PARENT_DIR/freepbx rm ../$FREEPBX_VERSION.tgz if [ $? -ne 0 ]; then echoerr "Failed to find FreePBX source directory" return fi install_package "nodejs" phreak_tree_patch "installlib/installcommand.class.php" "freepbx_installvercheck.diff" # bug fix to installer ./install -n if [ $? -ne 0 ]; then echoerr "Installation failed" return fi sed -i 's/^\(User\|Group\).*/\1 asterisk/' /etc/apache2/apache2.conf sed -i 's/AllowOverride None/AllowOverride All/' /etc/apache2/apache2.conf PHP_VERSION=`ls /etc/php | tr -d '\n'` printf "System version of PHP is %s\n" "$PHP_VERSION" sed -i 's/\(^upload_max_filesize = \).*/\120M/' /etc/php/$PHP_VERSION/apache2/php.ini sed -i 's/\(^upload_max_filesize = \).*/\120M/' /etc/php/$PHP_VERSION/cli/php.ini printf "%s\n" "Reloading and restarting Apache web server..." a2enmod rewrite systemctl restart apache2 PUBLIC_IP=`dig +short myip.opendns.com @resolver1.opendns.com` printf "Public IP address is: %s\n" "$PUBLIC_IP" hostname -I printf "%s\n" "FreePBX has been installed and can be accessed at http://IP-ADDRESS/admin" printf "%s\n" "Use the appropriate IP address for your system, as indicated above." printf "%s\n" "You will need to navigate to this page to complete setup." printf "%s\n" "If this system is Internet facing, you are urged to secure your system" printf "%s\n" "by restricting access to specific IP addresses only." } uninstall_freepbx() { printf "%s\n" "Uninstalling and removing FreePBX-specific stuff" # ./install_amp --uninstall # where is this file even located? rm /usr/sbin/amportal # rm -rf /var/lib/asterisk/bin/* # there could be other stuff in here rm -rf /var/www/html/admin/* rm /etc/amportal.conf rm $AST_CONFIG_DIR/amportal.conf rm /etc/freepbx.conf rm $AST_CONFIG_DIR/freepbx.conf } run_testsuite_test() { testcount=$(($testcount + 1)) ./runInVenv.sh python3 runtests.py --test=tests/$1 # XXX It also seems that if pre-reqs are not satisfied, exit code is 0? if [ $? -ne 0 ]; then # test failed printf "Exit code was %d\n" $? ls lastrun=`get_newest_astdir` # get the directory containing the logs from the most recently run test if [ "$lastrun" = "" ]; then echoerr "No test executions found in $AST_SOURCE_PARENT_DIR/testsuite/logs/$1/" ls -la $AST_SOURCE_PARENT_DIR/testsuite/logs/$1/ exit 1 fi ls "$lastrun/ast1/var/log/asterisk/full.txt" if [ -f "$lastrun/ast1/var/log/asterisk/full.txt" ]; then grep -B 12 "UserEvent(" $lastrun/ast1/var/log/asterisk/full.txt | grep -v "pbx.c: Launching" | grep -v "stasis.c: Topic" # this should provide a good idea of what failed (or at least, what didn't succeed) fi else # test succeeded testsuccess=$(($testsuccess + 1)) fi } run_testsuite_test_only() { # $2 = stress test cd $AST_SOURCE_PARENT_DIR/testsuite # required, full paths are not sufficient, we must cd into the dir... if [ $? -ne 0 ]; then exit 2 fi if [ ! -d "$AST_SOURCE_PARENT_DIR/testsuite/tests/$1" ]; then echoerr "No such directory: $AST_SOURCE_PARENT_DIR/testsuite/tests/$1" exit 2 fi echo "$AST_SOURCE_PARENT_DIR/testsuite/runtests.py --test=tests/$1" iterations=1 if [ "$2" = "1" ]; then iterations=7 fi while [ $iterations -gt 0 ]; do # POSIX for loop ./runInVenv.sh python3 $AST_SOURCE_PARENT_DIR/testsuite/runtests.py --test=tests/$1 if [ $? -ne 0 ]; then # test failed echo "ls -d -v $AST_SOURCE_PARENT_DIR/testsuite/logs/$1/* | tail -1" lastrun=`ls -d -v $AST_SOURCE_PARENT_DIR/testsuite/logs/$1/* | tail -1` # get the directory containing the logs from the most recently run test ############# this is not FreeBSD compatible. if [ "$lastrun" = "" ]; then echoerr "No test executions found in $AST_SOURCE_PARENT_DIR/testsuite/logs/$1/" ls -la $AST_SOURCE_PARENT_DIR/testsuite/logs/$1/ exit 1 fi ls "$lastrun/ast1/var/log/asterisk/full.txt" grep -B 12 "UserEvent(" $lastrun/ast1/var/log/asterisk/full.txt | grep -v "pbx.c: Launching" | grep -v "stasis.c: Topic" # this should provide a good idea of what failed (or at least, what didn't succeed) exit 1 fi iterations=$(( iterations - 1 )) done if [ "$2" = "1" ]; then printf "Stress test passed: %s\n" "$1" fi } run_testsuite_tests() { testcount=0 testsuccess=0 if [ ! -d "$AST_SOURCE_PARENT_DIR/testsuite" ]; then echoerr "Directory $AST_SOURCE_PARENT_DIR/testsuite does not exist!" exit 1 fi if [ ! -f "$AST_CONFIG_DIR/asterisk.conf" ]; then echoerr "$AST_CONFIG_DIR/asterisk.conf not found" exit 1 fi ls -la /usr/sbin/asterisk cd $AST_SOURCE_PARENT_DIR/testsuite # run manually for good measure, and so we get the full output # install_package "python3.11-venv" # Doesn't exist on Debian 13 ./setupVenv.sh run_testsuite_test "apps/assert" run_testsuite_test "apps/dialtone" run_testsuite_test "apps/verify" run_testsuite_test "funcs/func_dbchan" printf "%d of %d test(s) passed\n" $testsuccess $testcount if [ $testcount -ne $testsuccess ]; then exit 1 fi exit 0 } install_phreak_testsuite_test() { # $1 = test path parent=`dirname "$1"` base=`basename "$1"` if [ ! -d "testsuite/tests/$parent" ]; then echoerr "Directory testsuite/tests/$parent does not exist!" exit 2 fi if [ ! -f "testsuite/tests/$parent/tests.yaml" ]; then echoerr "File tests/$parent/tests.yaml does not exist!" exit 2 fi if [ ! -d "phreakscript/testsuite/tests/$1" ]; then echoerr "Directory phreakscript/testsuite/tests/$1 does not exist!" ls -la phreakscript/testsuite/tests exit 2 fi cp -r "phreakscript/testsuite/tests/$1" "testsuite/tests/$parent" echo " - test: '$base'" >> "testsuite/tests/$parent/tests.yaml" # rather than have a patch for this file, which could be subject to frequent change and result in a finicky patch that's likely to fail, simply append it to the list of tests to run printf "Installed test: %s\n" "$1" } add_phreak_testsuite() { printf "%s\n" "Applying PhreakNet test suite additions" cd $AST_SOURCE_PARENT_DIR if [ ! -d phreakscript ]; then # if dir exists, assume it's the repo git clone https://github.com/InterLinked1/phreakscript.git fi cd phreakscript if [ $? -ne 0 ]; then echoerr "Failed to find phreakscript directory" pwd exit 1 fi git config pull.rebase false # this is the default. Do this solely to avoid those annoying "Pulling without specifying" warnings... git pull # in case it already existed, update the repo cd $AST_SOURCE_PARENT_DIR install_phreak_testsuite_test "apps/assert" install_phreak_testsuite_test "apps/dialtone" install_phreak_testsuite_test "apps/verify" install_phreak_testsuite_test "funcs/func_dbchan" printf "%s\n" "Finished patching testsuite" } install_testsuite_itself() { apt-get clean apt-get update -y apt-get upgrade -y cd $AST_SOURCE_PARENT_DIR if [ -d "testsuite" ]; then if [ "$FORCE_INSTALL" = "1" ]; then printf "%s\n" "Reinstalling testsuite..." rm -rf testsuite else echoerr "Test Suite already exists... specify --force flag to reinstall" fi fi git clone https://github.com/asterisk/testsuite.git if [ $? -ne 0 ]; then echoerr "Failed to download testsuite..." return 1 fi cd testsuite ./contrib/scripts/install_prereq install if [ $? -ne 0 ]; then die "Failed to install test suite" fi # In theory, the below is not necessary: pip3 install pyyaml pip3 install twisted cd $AST_SOURCE_PARENT_DIR cd testsuite ./setupVenv.sh if [ $? -ne 0 ]; then # Test suite failed to compile. # Disable yappcap and try again. This is an old library that no longer compiles on newer systems, e.g. Ubuntu 24.04 echoerr "Test suite failed to install, disabling yappcap and trying again..." sed -i 's|^https://github.com/asterisk/yappcap|#https://github.com/asterisk/yappcap|' extras.txt ./setupVenv.sh # Retry fi # ./runInVenv.sh python3 ./runtests.py -t tests/channels/iax2/basic-call/ # run a single basic test #./runInVenv.sh python3 ./runtests.py -l # list all tests if [ ! -f "$AST_SOURCE_PARENT_DIR/testsuite/tests/apps/tests.yaml" ]; then echoerr "tests/apps/tests.yaml doesn't exist?" exit 1 else # fix testsuite regression caused by c930bfec37118e37ff271bf381825408d2409fec (missing newline at EOF) echo "" >> "$AST_SOURCE_PARENT_DIR/testsuite/tests/apps/tests.yaml" fi add_phreak_testsuite if [ "$RPT_MODULES" = "1" ]; then # Add radio tests cd $AST_SOURCE_PARENT_DIR/testsuite git apply $AST_SOURCE_PARENT_DIR/app_rpt/tests/apps/tests_apps.diff cp -r $AST_SOURCE_PARENT_DIR/app_rpt/tests/apps/rpt tests/apps fi printf "%s\n" "Asterisk Test Suite installation complete" } configure_devmode() { ./configure --enable-dev-mode $AST_CONFIGURE_FLAGS if [ $? -ne 0 ]; then exit 2 fi $AST_MAKE menuselect.makeopts menuselect/menuselect --enable DONT_OPTIMIZE --enable BETTER_BACKTRACES --enable COMPILE_DOUBLE --enable DO_CRASH menuselect.makeopts menuselect/menuselect --enable DEBUG_THREADS --enable MALLOC_DEBUG --enable DEBUG_FD_LEAKS menuselect.makeopts menuselect/menuselect --enable TEST_FRAMEWORK --enable-category MENUSELECT_TESTS menuselect.makeopts } install_testsuite() { # $1 = $FORCE_INSTALL cd $AST_SOURCE_PARENT_DIR # in case we're not already in the right directory AST_SRC_DIR=`ls -d */ | grep "^asterisk-" | tail -1` if [ "$AST_SRC_DIR" = "" ]; then echoerr "Asterisk source not found. Aborting..." pwd ls -la return 1 fi cd $AST_SOURCE_PARENT_DIR/$AST_SRC_DIR # Ensure we're compiled with dev mode, or recompile in dev mode if needed configure_devmode $AST_MAKE $AST_MAKE install install_testsuite_itself } install_samples() { # Only install sample config files if this is the first time (configs aren't already present on the system) if [ ! -f "$AST_CONFIG_DIR/asterisk.conf" ]; then if [ -d "$AST_CONFIG_DIR" ]; then printf "$AST_CONFIG_DIR existed but not $AST_CONFIG_DIR/asterisk.conf... Installing sample configs now." fi # the phoneprov files will fail to install if make install has not been run yet, so we do this AFTER make install. $AST_MAKE samples # do not run this on upgrades or it will wipe out your config! rm $AST_CONFIG_DIR/users.conf # remove users.conf, because a) it's stupid, and shouldn't be used, and b) it creates warnings when reloading other modules, e.g. chan_dahdi. # Change a few defaults for our sanity. This makes Asterisk more usable immediately without modifying or replacing the configs. sed -i 's/;verbose =/verbose =/' $AST_CONFIG_DIR/asterisk.conf sed -i 's/;timestamp =/timestamp =/' $AST_CONFIG_DIR/asterisk.conf else printf "Skipping sample config installation, since %s already exists\n" $AST_CONFIG_DIR fi } git_patch() { printf "Applying git patch: %s\n" "$1" if [ "$GIT_REPO_PATH" = "" ]; then die "Variable GIT_REPO_PATH is empty... bug!" fi cp "$GIT_REPO_PATH/patches/$1" "/tmp/$1" if [ $? -ne 0 ]; then die "File $GIT_REPO_PATH/patches/$1 does not exist" fi git apply "/tmp/$1" if [ $? -ne 0 ]; then die "Failed to apply git patch $1 - this should be reported..." fi rm "/tmp/$1" } # In most cases, the rate limit is only an issue in the GitHub runners... github_waitfor_ratelimit_reset() { echoerr "Download failed, checking if we were rate-limited..." if [ ! -f $CURL_HEADERS_DUMPFILE ]; then echoerr "$CURL_HEADERS_DUMPFILE doesn't exist?" return fi remaining=$( grep "x-ratelimit-remaining: 0" $CURL_HEADERS_DUMPFILE ) if [ $? -ne 0 ]; then grep "x-ratelimit-remaining: " $CURL_HEADERS_DUMPFILE if [ $? -ne 0 ]; then cat $CURL_HEADERS_DUMPFILE fi remaining=$( grep "x-ratelimit-remaining: " $CURL_HEADERS_DUMPFILE | cut -d':' -f2 | xargs | tr -d '\r' | tr -d '\n' ) printf "Download failed, but have $remaining rate limit remaining...\n" return fi resetepoch=$( grep "x-ratelimit-reset: " $CURL_HEADERS_DUMPFILE | cut -d':' -f2 | xargs | tr -d '\r' | tr -d '\n' ) if [ $? -ne 0 ]; then echoerr "Headers missing from $CURL_HEADERS_DUMPFILE" cat $CURL_HEADERS_DUMPFILE return fi now=$( date +"%s" | tr -d '\n' ) waitsecs=$( expr $resetepoch - $now ) if [ $waitsecs -gt 0 ]; then # sanity check the result cat $CURL_HEADERS_DUMPFILE # Dump headers, including x-github-request-id for debugging echoerr "Waiting $waitsecs seconds for rate-limit reset..." sleep $waitsecs fi } download_github_patch() { # $1 = GitHub repo, e.g. asterisk/asterisk, $2 = REF, $3 = output file if [ -f $2 ]; then rm $2 # Remove any previously downloaded patch file fi if [ -f $CURL_HEADERS_DUMPFILE ]; then rm $CURL_HEADERS_DUMPFILE fi $CURL --dump-header $CURL_HEADERS_DUMPFILE -o "$3" -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/commits/$2" if [ ! -s $3 ] && [ ! -f $3 ]; then github_waitfor_ratelimit_reset # Try again $CURL --dump-header $CURL_HEADERS_DUMPFILE -o "$3" -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/commits/$2" if [ ! -s $3 ] && [ ! -f $3 ]; then # May need to try twice... github_waitfor_ratelimit_reset $CURL --dump-header $CURL_HEADERS_DUMPFILE -o "$3" -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/commits/$2" fi fi if [ ! -s $3 ]; then if [ ! -f $3 ]; then $CURL_DEBUG --dump-header $CURL_HEADERS_DUMPFILE -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/commits/$2" # show what happened die "Failed to download patch $2 (https://github.com/$1/commit/$2.patch) to $3" fi die "Failed to download patch $2 - downloaded empty file instead..." fi } download_github_pr() { # $1 = GitHub repo, e.g. asterisk/asterisk, $2 = PR, $3 = output file if [ -f $CURL_HEADERS_DUMPFILE ]; then rm $CURL_HEADERS_DUMPFILE fi # patch-diff.githubusercontent.com is rate limited strictly now so use the GitHub API instead, even unauthenticated $CURL --dump-header $CURL_HEADERS_DUMPFILE -o "$3" -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/pulls/$2" if [ ! -s $3 ] && [ ! -f $3 ]; then github_waitfor_ratelimit_reset # Try again $CURL --dump-header $CURL_HEADERS_DUMPFILE -o "$3" -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/pulls/$2" if [ ! -s $3 ] && [ ! -f $3 ]; then # May need to try twice... github_waitfor_ratelimit_reset $CURL --dump-header $CURL_HEADERS_DUMPFILE -o "$3" -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/pulls/$2" fi fi if [ ! -s $3 ]; then if [ ! -f $3 ]; then $CURL_DEBUG --dump-header $CURL_HEADERS_DUMPFILE -o "$3" -H "Accept: application/vnd.github.patch" "https://api.github.com/repos/$1/pulls/$2" die "Failed to download PR $2 to $3" fi die "Failed to download PR $2 - downloaded empty file instead..." fi } apply_temp_patch() { # $1 = patch file, will be deleted afterwards, $2 = 1 to force apply patches that won't apply with just 'git apply' if [ "$2" = "1" ]; then git apply -v $1 if [ $? -ne 0 ]; then echoerr "Failed to apply patch using git apply, retrying directly using patch..." patch -p1 -F 3 -f --verbose < $1 fi else git apply $1 fi if [ $? -ne 0 ]; then cat $1 die "Failed to apply patch... this should be reported..." fi rm $1 } revert_temp_patch() { # $1 = patch file, will be deleted afterwards, $2 = 1 to ignore failure patch -u -b -p 1 --reverse -i $1 if [ $? -ne 0 ] && [ "$2" != "1" ]; then die "Failed to reverse patch... this should be reported..." fi rm $1 } asterisk_pr() { # $1 = PR number, $2 = 1 to force PATCH_FILE=/tmp/$1.pr.diff download_github_pr "asterisk/asterisk" $1 $PATCH_FILE apply_temp_patch "$PATCH_FILE" } github_apply_commit() { # $1 = repo, e.g. asterisk/asterisk, $2 = commit hash PATCH_FILE=/tmp/$2.diff download_github_patch "$1" "$2" "$PATCH_FILE" apply_temp_patch "$PATCH_FILE" } github_apply_pr() { # $1 = repo, e.g. asterisk/asterisk, $2 = PR number PATCH_FILE=/tmp/$2.pr.diff download_github_pr "$1" "$2" "$PATCH_FILE" apply_temp_patch "$PATCH_FILE" "$PATCH_FILE" } dahlin_apply_commit() { printf "Applying DAHDI Linux commit $1\n" github_apply_commit "asterisk/dahdi-linux" "$1" } dahlin_apply_pr() { printf "Applying DAHDI Linux PR $1\n" github_apply_pr "asterisk/dahdi-linux" "$1" } dahtool_apply_pr() { printf "Applying DAHDI Tools PR $1\n" github_apply_pr "asterisk/dahdi-tools" "$1" } dahdi_undo() { # $1 = description, $2 = REF printf "Restoring drivers by undoing PATCH: %s\n" "$1" PATCH_FILE=/tmp/$2.diff download_github_patch "asterisk/dahdi-linux" "$2" "$PATCH_FILE" revert_temp_patch "$PATCH_FILE" } dahdi_undo_ignore_failures() { # $1 = description, $2 = REF printf "Restoring drivers by undoing PATCH: %s\n" "$1" PATCH_FILE=/tmp/$2.diff download_github_patch "asterisk/dahdi-linux" "$2" "$PATCH_FILE" revert_temp_patch "$PATCH_FILE" 1 } dahdi_custom_undo() { # $1 = description, $2 = patch file printf "Applying custom reverse DAHDI patch: %s\n" "$1" patch -u -p 1 --reverse -i $2 if [ $? -ne 0 ]; then die "Failed to reverse custom DAHDI patch... this should be reported..." fi } dahdi_custom_patch() { # $1 = patch name, $2 = file to patch, $3 = patch file printf "Applying custom DAHDI patch: %s\n" "$1" if [ ! -f "$AST_SOURCE_PARENT_DIR/$2" ]; then die "File $AST_SOURCE_PARENT_DIR/$2 does not exist" fi patch -u -b "$AST_SOURCE_PARENT_DIR/$2" -i $3 if [ $? -ne 0 ]; then die "Failed to apply DAHDI patch (patch -u -b $AST_SOURCE_PARENT_DIR/$2 -i /tmp/$1.patch)... this should be reported..." fi } dahdi_unpurge() { # undo "great purge" of 2018: $1 = DAHDI_LIN_SRC_DIR printf "%s\n" "Reverting patches that removed driver support in DAHDI..." dahdi_custom_undo "Remove unnecessary dahdi_pci_module macro" "${GIT_REPO_PATH}/patches/dahdi_pci_module.diff" dahdi_custom_undo "Remove unnecessary DAHDI_IRQ_HANDLER macro" "${GIT_REPO_PATH}/patches/dahdi_irq_handler.diff" dahdi_undo "Remove struct devtype for unsupported drivers" "75620dd9ef6ac746745a1ecab4ef925a5b9e2988" dahdi_undo "Remove support for all but wcb41xp wcb43xp and wcb23xp." "29cb229cd3f1d252872b7f1924b6e3be941f7ad3" dahdi_undo "Remove support for wctdm800, wcaex800, wctdm410, wcaex410." "a66e88e666229092a96d54e5873d4b3ae79b1ce3" # The tor2 and pciradio patches do not revert cleanly on their own. We need to finish it off manually with additional patches: dahdi_undo_ignore_failures "Remove support for tor2." "60d058cc7a064b6e07889f76dd9514059c303e0f" dahdi_custom_patch "tor2_Kbuild" "$1/drivers/dahdi/Kbuild" "${GIT_REPO_PATH}/patches/tor2_Kbuild.diff" dahdi_undo_ignore_failures "Remove support for pciradio." "bfdfc4728c033381656b59bf83aa37187b5dfca8" dahdi_custom_patch "pciradio_Kbuild" "$1/drivers/dahdi/Kbuild" "${GIT_REPO_PATH}/patches/pciradio_Kbuild.diff" printf "%s\n" "Finished undoing DAHDI removals!" } linux_headers_info() { printf "Your kernel: " uname -r printf "Available headers for your system: \n" printf "You may need to upgrade your kernel using apt-get dist-upgrade to install the build headers for your system.\n" if [ "$PAC_MAN" = "apt-get" ]; then apt search linux-headers 2>1 | grep "linux-headers" fi printf "Installed:\n" ls -la /lib/modules/ } linux_headers_install_apt() { if [ "$KPKG" != "" ]; then # Needed for Ubuntu 26.04 / 7.0 kernel printf "Installing override packages: $KPKG\n" apt-get install -y $KPKG # no quotes, in case multiple packages are specified ls -la /usr/src if [ "$KSRC" != "" ] && [ ! -d "$KSRC" ]; then echoerr "$KSRC does not exist" ls /usr/src/linux-*/* ls /usr/src/linux-headers* | grep "azure" fi if [ "$PKG_KSRC" = "" ]; then # Try to determine the right one to use ourselves # It'll be something like '/usr/src/linux-headers-7.0.0-1002-azure' # We only do this in the CI, so this doesn't need to be generic printf "Autodetermining directory to use in /usr/src\n" srcdir=$( ls /usr/src | grep "linux-headers" | grep "azure" | grep -v "fde" | tr -d '\n' ) PKG_KSRC="/usr/src/$srcdir" printf "PKG_KSRC=%s\n" "$PKG_KSRC" fi if [ ! -d "$PKG_KSRC" ]; then echoerr "PKG_KSRC=$PKG_KSRC does not exist" ls /usr/src/linux-*/.config ls /usr/src/linux-headers* | grep "azure" exit 1 fi export KSRC="$PKG_KSRC" else # Special case for Raspberry Pi grep -i Model /proc/cpuinfo | grep -q Raspberry if [ $? -ne 0 ]; then apt-get install -y linux-headers-`uname -r` else # raspberrypi-kernel-headers isn't used on Raspberry Pi OS 13+, instead it uses a more normal linux-headers-* package. # If we are on Debian 13 or later, we will install that package instead. DEB_VERSION=$(grep -oP '(?<=^VERSION_ID=).+' /etc/os-release | tr -d '"') if [ $DEB_VERSION -ge 13 ]; then apt-get install -y linux-headers-`uname -r` else apt-get install -y raspberrypi-kernel-headers fi fi fi if [ $? -ne 0 ]; then kernel=`uname -r` # Can happen if a newer kernel was installed but hasn't taken effect yet echoerr "Unable to find automatic installation candidate for $kernel - reboot needed?" # install the generic kernel headers # this usually won't happen in a VM, but can happen in containers. For example, the containers used for GitHub actions. GENERIC_HEADERS=1 apt-get install -y linux-headers-amd64 if [ $? -ne 0 ]; then echoerr "Failed to download system headers and exception failed" linux_headers_info exit 2 fi fi } install_wanpipe() { MYSOURCEDIR=/lib/modules/$(uname -r)/build MYSOURCEDIRORIG=$MYSOURCEDIR MYINCLUDEDIR=/usr/src/linux-headers-$(uname -r)/include ensure_installed flex # required for wancfg ensure_installed bison # required for wanpipe ensure_installed libtool # required for libsangoma # wanpipe currently fails to install on Debian because the wanpipe Setup.sh doesn't support recursive Makefile includes. # Explicitly find the right source directory to use if that's the case. # XXX See below: I don't think this is fully correct at the moment, since SOURCEDIR in wanpipe's Setup.sh is used for multiple, unrelated things. while true; do printf "Checking file: %s\n" "$MYSOURCEDIR/Makefile" >&2 if [ ! -f "$MYSOURCEDIR/Makefile" ]; then echoerr "File $MYSOURCEDIR/Makefile does not exist\n" break fi # POSIX sh doesn't support ${var:x:y} syntax contents=$( cat "$MYSOURCEDIR/Makefile" ) first7=$( echo "$contents" | cut -d" " -f1 ) if [ "${first7}" = "include" ]; then nextfile=$( echo "$contents" | cut -d" " -f2 ) printf "Following include to %s\n" "${nextfile}" >&2 MYSOURCEDIR=`dirname "${nextfile}"` else printf "Actual makefile is %s\n" "$MYSOURCEDIR/Makefile" >&2 break fi done cd $AST_SOURCE_PARENT_DIR # Sangoma clearly doesn't know how to run a web server, since their server keeps going down. # Pull tarball from Wayback Machine if Sangoma's is unresponsive if [ "$OFFLINE_INSTALL" = "1" ]; then cp $OFFLINE_DIR/wanpipe.tgz . else $WGET --tries=1 https://ftp.sangoma.com/linux/current_wanpipe/${WANPIPE_SOURCE_NAME}.tgz if [ $? -ne 0 ]; then # Note: This link needs to be updated for new versions of wanpipe $WGET https://web.archive.org/web/20240708051349/https://ftp.sangoma.com/linux/current_wanpipe/${WANPIPE_SOURCE_NAME}.tgz fi fi WANPIPE_DIR=`tar -tzf $WANPIPE_SOURCE_NAME.tgz | head -1 | cut -f1 -d"/"` if [ -d $WANPIPE_DIR ]; then if [ "$FORCE_INSTALL" != "1" ]; then die "Directory $WANPIPE_DIR already exists... specify --force to overwrite" fi rm -rf $WANPIPE_DIR fi tar xvfz ${WANPIPE_SOURCE_NAME}.tgz cd ${WANPIPE_DIR} if [ $? -ne 0 ]; then die "Failed to download/extract wanpipe" fi rm ${AST_SOURCE_PARENT_DIR}/${WANPIPE_SOURCE_NAME}.tgz #phreak_fuzzy_patch "af_wanpipe.diff" #./Setup dahdi --silent #./Setup install --silent # Even if Setup dahdi fails, this can work # Manually build wanpipe since using Setup, KBUILD_EXTRA_SYMBOLS isn't set and this is required or symbols will be missing. if [ "$DAHDI_LIN_SRC_DIR" = "" ]; then # For standalone wanpipe install, this won't have been defined since we didn't just install DAHDI. Calculate it now. cd $AST_SOURCE_PARENT_DIR DAHDI_LIN_SRC_DIR=`get_newest_dahlindir` cd ${WANPIPE_DIR} fi # Wanpipe requires the kernel headers to build, just like DAHDI Linux does # XXX Missing logic for other distros if [ "$PAC_MAN" = "apt-get" ]; then # The headers are split into the common and arch specific dirs. # wanpipe needs stuff in both, so combine them. ksrc_dir1=$( ls /usr/src/ | grep linux-headers | grep "common" | tail -1 | tr -d '\n' ) ksrc_dir2=$( ls /usr/src/ | grep linux-headers | grep -v "common" | tail -1 | tr -d '\n' ) wanpipe_kdir1="/usr/src/${ksrc_dir1}" wanpipe_kdir2="/usr/src/${ksrc_dir2}" cd $AST_SOURCE_PARENT_DIR if [ -d wanpipe_linux_headers ]; then rm -rf wanpipe_linux_headers fi # It needs to be done in this order. Start with the arch-specific version, # then add in the common one. If we do it the other way, even with cp -R, # .config and possibly other stuff doesn't end up copied to the combined directory. cp -R ${wanpipe_kdir2} wanpipe_linux_headers cp -R ${wanpipe_kdir1}/* wanpipe_linux_headers cd ${WANPIPE_DIR} wanpipe_kdir="/usr/src/wanpipe_linux_headers" printf "Setting KSRC to %s\n" "${wanpipe_kdir}" # These files better both exist! ls -la ${wanpipe_kdir}/.config && ls -la ${wanpipe_kdir}/include/linux/proc_fs.h if [ $? -ne 0 ]; then echoerr "Failed to merge headers directories?" ls -la ${wanpipe_kdir1} ${wanpipe_kdir2} ${wanpipe_kdir1}/include/linux/proc_fs.h ${wanpipe_kdir2}/include/linux/proc_fs.h fi fi # Compile and install WANPIPE_MAKE_ARGS="dahdi DAHDI_DIR=$AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR KBUILD_EXTRA_SYMBOLS=$AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR/drivers/dahdi/Module.symvers" if [ "${wanpipe_kdir}" != "" ]; then WANPIPE_MAKE_ARGS="$WANPIPE_MAKE_ARGS KDIR=${wanpipe_kdir}" fi $AST_MAKE -j$(nproc) $WANPIPE_MAKE_ARGS && $AST_MAKE install if [ $? -ne 0 ]; then # If compilation fails, show the error at the bottom echoerr "Wanpipe compilation failed:" $AST_MAKE $WANPIPE_MAKE_ARGS VERBOSE=1 && $AST_MAKE install fi if [ $? -ne 0 ]; then echoerr "wanpipe install failed: unsupported kernel?" # No need to cat setup_drv_compile.log here, Setup automatically does so on failure # XXX wanpipe currently fails to compile on kernels newer than 6.1.0. See [PHREAKSCRIPT-49] cat setup_drv_compile.log # cat for now since we aren't using ./Setup if [ "$IGNORE_FAILURES" = "1" ]; then printf "Installation of other items will proceed anyways...\n" sleep 1 else exit 1 fi else wanrouter stop wanrouter start fi } kernel_header_debug() { printf "Running kernel: %s\n" $( uname -r ) printf "KVERS: %s\n" "$KVERS" printf "KSRC: %s\n" "$KSRC" ls -la /usr/src/ ls -la /usr/src/kernels printf "Available kernel packages:\n" dnf search kernel-devel printf "Installed kernels:\n" rpm -qa | grep kernel ls -la /lib/modules ls -la /usr/src/ ls -la /usr/src/kernels ls -la /usr/src/kernels/* } import_source() { # $1 = online source, $2 = offline source if [ "$OFFLINE_INSTALL" = "1" ]; then cp "$1" $AST_SOURCE_PARENT_DIR else $WGET "$1" fi } install_kernel_headers() { # Install the kernel headers if [ "$KSRC" = "" ]; then printf "Actual kernel version: %s\n" $( uname -r ) if [ "$PAC_MAN" = "apt-get" ]; then install_package "kmod binutils-dev dh-autoreconf libusb-dev" linux_headers_install_apt elif [ "$PAC_MAN" = "yum" ]; then install_package "kmod kernel-devel kernel-headers" dnf list installed 'kernel*' # Fedora-based systems seem to have a newer kernel-devel present than the actual running kernel. # This includes Red Hat, which may install newer headers than the current system: https://access.redhat.com/discussions/4656371?tour=8 # Try to detect that and fix it. KERNEL_DEVEL_VERSION=$( dnf list installed 'kernel-devel' | grep "kernel-devel" | xargs | cut -d' ' -f2 | cut -d'.' -f1-5 ) kernel_ver=$( uname -r | cut -d'.' -f1-5 ) if [ "$KERNEL_DEVEL_VERSION" != "$kernel_ver" ]; then echoerr "kernel-devel mismatch has been detected. Package provides $KERNEL_DEVEL_VERSION, but running kernel is $kernel_ver" echoerr "Installing specific kernel-devel package to match..." dnf install -y kernel-devel-$(uname -r) KERNEL_DEVEL_VERSION=$( dnf list installed 'kernel-devel' | grep "kernel-devel" | xargs | cut -d' ' -f2 | cut -d'.' -f1-5 ) if [ "$KERNEL_DEVEL_VERSION" != "$kernel_ver" ]; then KERNEL_MMP_VERSION=$( uname -r | cut -d'-' -f1-2 ) printf "Attempting to install: %s\n" "$KERNEL_MMP_VERSION" dnf install -y kernel-devel-$KERNEL_MMP_VERSION KERNEL_DEVEL_VERSION=$( dnf list installed 'kernel-devel' | grep "kernel-devel" | xargs | cut -d' ' -f2 | cut -d'.' -f1-5 ) fi if [ "$KERNEL_DEVEL_VERSION" != "$kernel_ver" ] && [ "$RHEL_MAJOR_VERSION_8" != "1" ]; then dnf remove -y kernel-devel dnf install -y kernel-devel-matched KERNEL_DEVEL_VERSION=$( dnf list installed 'kernel-devel' | grep "kernel-devel" | xargs | cut -d' ' -f2 | cut -d'.' -f1-5 ) fi if [ "$KERNEL_DEVEL_VERSION" != "$kernel_ver" ]; then echoerr "kernel-devel mismatch still present? ($KERNEL_DEVEL_VERSION != $kernel_ver)" if [ "$AUTOSET_KVERS" = "1" ]; then printf "Auto-setting KVERS=%s\n" "$KERNEL_DEVEL_VERSION" KVERS="$KERNEL_DEVEL_VERSION" fi if [ "$KVERS" != "" ]; then # Kernel version override for GitHub CI builds, where the available headers on Fedora-based distros # do not match the running kernel. This probably would not run successfully, but in this case, # we just care about building it. ls /usr/src/kernels | grep "$KVERS" if [ $? -ne 0 ]; then printf "Installed kernels:\n" ls /usr/src/kernels die "No kernel matching specified kernel version, unable to autodetermine KSRC from specifiers KVERS: $KVERS" fi ksrc_dir=$( ls /usr/src/kernels | grep "${KVERS}" | head -n 1 | tr -d '\n' ) printf "Kernel source dir: %s\n" "$ksrc_dir" new_ksrc="/usr/src/kernels/${ksrc_dir}" if [ "$new_ksrc" == "" ]; then printf "Installed kernels:\n" ls /usr/src/kernels die "Couldn't autodetermine KSRC from KVERS" fi printf "Setting KSRC to %s\n" "$new_ksrc" export KSRC="$new_ksrc" elif [ "$GENERIC_HEADERS" != "1" ]; then kernel_header_debug exit 1 fi fi else echog "kernel-devel is matched with kernel. Package provides $KERNEL_DEVEL_VERSION, and running kernel is $kernel_ver" fi elif [ "$PAC_MAN" = "zypper" ]; then # There are multiple kernel-*-devel packages in the openSUSE repos. The default one should be a safe assumption. install_package "kmod kernel-source kernel-devel kernel-default-devel" elif [ "$PAC_MAN" = "pacman" ]; then install_package "kmod linux-headers" elif [ "$PAC_MAN" = "apk" ]; then install_package "linux-headers linux-lts-dev" apk search linux-headers ls -la /usr/src KERNEL_HEADERS_DETECTED_VER=$( ls /usr/src/ | grep linux-headers | cut -d'-' -f3- ) kernel_ver=$( uname -r | cut -d'.' -f1-5 ) if [ "$KERNEL_HEADERS_DETECTED_VER" != "$kernel_ver" ]; then echoerr "Kernel headers mismatch present? ($KERNEL_HEADERS_DETECTED_VER != $kernel_ver)" if [ "$AUTOSET_KVERS" = "1" ]; then printf "Auto-setting KVERS=%s\n" "$KERNEL_HEADERS_DETECTED_VER" KVERS="$KERNEL_HEADERS_DETECTED_VER" fi if [ "$KVERS" != "" ]; then # Kernel version override for GitHub CI builds ksrc_dir=$( ls /usr/src/ | grep linux-headers | grep "${KVERS}" | head -n 1 | tr -d '\n' ) printf "Kernel source dir: %s\n" "$ksrc_dir" new_ksrc="/usr/src/${ksrc_dir}" if [ "$new_ksrc" == "" ]; then printf "Installed kernels:\n" ls /usr/src/ | grep linux-headers die "Couldn't autodetermine KSRC from KVERS" fi printf "Setting KSRC to %s\n" "$new_ksrc" export KSRC="$new_ksrc" fi fi elif [ "$PAC_MAN" = "pkg" ]; then echoerr "DAHDI is not supported on FreeBSD! Proceed at your own risk!" sleep 2 else echoerr "Unable to install potential DAHDI prerequisites" sleep 2 fi # Check that the kernel sources are really present # /usr/src/linux-headers-* on Debian # /usr/src/kernels on Rocky Linux # /usr/src/linux-* on openSUSE numkernheaders=$( ls /usr/src/linux-headers-* /usr/src/kernels/* /usr/src/linux-* 2>/dev/null | wc -w ) if [ "$numkernheaders" = "0" ]; then echoerr "Kernel headers do not appear to be installed... compilation will likely fail" sleep 2 fi fi } get_dahlin_source() { cd $AST_SOURCE_PARENT_DIR # just in case, for some reason, these already existed... don't let them throw everything off: rm -f dahdi-linux-current.tar.gz dahdi-tools-current.tar.gz $DAHLIN_SRC_NAME $DAHTOOL_SRC_NAME $WGET $DAHLIN_SRC_URL if [ ! -f $DAHLIN_SRC_NAME ]; then # If this happens, wget is probably not installed die "Failed to download $DAHLIN_SRC_URL... is wget installed?" fi $WGET $DAHTOOL_SRC_URL DAHDI_LIN_SRC_DIR=`tar -tzf $DAHLIN_SRC_NAME | head -1 | cut -f1 -d"/"` DAHDI_TOOLS_SRC_DIR=`tar -tzf $DAHTOOL_SRC_NAME | head -1 | cut -f1 -d"/"` if [ -d "$AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR" ]; then if [ "$FORCE_INSTALL" = "1" ]; then rm -rf $DAHDI_LIN_SRC_DIR else ls -la die "Directory $DAHDI_LIN_SRC_DIR already exists. Please rename or delete this directory and restart installation or specify the force flag." fi fi if [ -d "$AST_SOURCE_PARENT_DIR/$DAHDI_TOOLS_SRC_DIR" ]; then if [ "$FORCE_INSTALL" = "1" ]; then rm -rf $DAHDI_TOOLS_SRC_DIR else ls -la die "Directory $DAHDI_TOOLS_SRC_DIR already exists. Please rename or delete this directory and restart installation or specify the force flag." fi fi tar -zxvf $DAHLIN_SRC_NAME && rm $DAHLIN_SRC_NAME tar -zxvf $DAHTOOL_SRC_NAME && rm $DAHTOOL_SRC_NAME if [ ! -d $AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR ]; then die "Directory not found: $AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR" fi if [ "$OFFLINE_PREP" = "1" ]; then mv $DAHDI_LIN_SRC_DIR "dahlin-offline" mv $DAHDI_TOOLS_SRC_DIR "dahtool-offline" DAHDI_LIN_SRC_DIR="dahlin-offline" DAHDI_TOOLS_SRC_DIR="dahtool-offline" fi # Download the dahdi-linux-extra repo. This is needed for OSLEC support. if [ ! -d dahdi-linux-extra.git ]; then git clone --depth 1 --single-branch --branch extra-2.10.y https://notabug.org/tzafrir/dahdi-linux-extra.git fi cp -r dahdi-linux-extra/drivers/staging $AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR/drivers # Since the OSLEC code is unlikely to change, there isn't much point in redownloading dahdi-linux-extra more than once. # DAHDI Linux (generally recommended to install DAHDI Linux and DAHDI Tools separately, as opposed to bundled) cd $AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR if [ "$DAHDI_OLD_DRIVERS" = "1" ]; then dahdi_unpurge $DAHDI_LIN_SRC_DIR # for some reason, this needs to be applied before the next branch patches # Enable building dahdi_dummy, which is disabled by default sed -i 's/#obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_DUMMY)/obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_DUMMY)/g' drivers/dahdi/Kbuild fi # Merged in master, but not yet in a current release dahlin_apply_commit "d7bbc8a96fe767bc4eee15dd43170f298282a4c3" # RHEL fixes for const struct device *dev dahlin_apply_commit "d932d9fbc8b3559829a76fffcedceb78d1fc1887" # dahdi_spantype fix dahlin_apply_pr 32 # PR 32: xpp: Fix 32-bit builds dahlin_apply_pr 57 # PR 57: RHEL build fixes dahlin_apply_pr 58 # PR 58: non-RHEL build fixes for older kernels dahlin_apply_pr 60 # PR 60: Fix old style declaration error on newer systems dahlin_apply_pr 62 # PR 62: Rename MAX to MAX_ATTEMPTS to avoid macro redefinition dahlin_apply_pr 64 # PR 64: More struct device to const struct device dahlin_apply_pr 66 # PR 66: Add braces around empty if body dahlin_apply_pr 69 # PR 69: DEFINE_SEMAPHORE for RHEL dahlin_apply_pr 77 # EXTRA_CFLAGS removal dahlin_apply_pr 92 # del_timer_sync wrapper dahlin_apply_pr 96 # from_timer renamed to timer_container_of dahlin_apply_pr 98 # hrtimer_init changed to hrtimer_setup dahlin_apply_pr 99 # use module_init/module_exit instead of init_module/cleanup_module # See https://github.com/asterisk/dahdi-linux/issues/97 # Sangoma needs to recreate the binary, until they do that, this driver is unusable on newer kernels # and the target must be disabled to build the rest of DAHDI Linux. # Sangoma is AWOL, so it might be a while... if [ "$DAHDI_DISABLE_VPMADT032" = "1" ]; then git_patch "vpmadt032_disable.diff" else # Merged in master, but not yet in a current release dahlin_apply_pr 79 # vpmadt032 binary blob fi # New Features if [ "$EXTRA_FEATURES" = "1" ]; then # Real time dial pulsing (DAHDI to Asterisk) git_patch "dahdi_rtoutpulse.diff" # Loop disconnect on-demand during a call # There are 2 patches here. The first can be applied using git apply git_patch "kewl.diff" # The 2nd one DOES NOT APPLY with git apply and WILL FAIL, because fuzz (offset 33 lines) and git apply is too stupid to deal with that. # Therefore, fallback to using patch, manually, for it. phreak_fuzzy_patch "kewl2.diff" # hearpulsing if [ "$HEARPULSING" = "1" ]; then git_patch "hearpulsing-dahlin.diff" fi if [ "$EMPULSE" = "1" ]; then printf "Enabling EMPULSE for this build\n" sed -i 's|/\* #define EMPULSE \*/|#define EMPULSE|g' include/dahdi/dahdi_config.h # Enable EMPULSE by default. Note that the * must be escaped for sed. fi else echoerr "Skipping DAHDI Linux feature patches..." fi } get_dahtool_source() { if [ ! -d $AST_SOURCE_PARENT_DIR/$DAHDI_TOOLS_SRC_DIR ]; then die "Directory not found: $AST_SOURCE_PARENT_DIR/$DAHDI_TOOLS_SRC_DIR" fi cd $AST_SOURCE_PARENT_DIR/$DAHDI_TOOLS_SRC_DIR # Merged in master, but not yet in a current release dahtool_apply_pr 22 # PR 22 (dahdi_cfg: fix truncation warning) dahtool_apply_pr 23 # PR 23 (xpp/echo_loader.c: static get_ver) # New Features # hearpulsing if [ "$EXTRA_FEATURES" = "1" ]; then if [ "$HEARPULSING" = "1" ]; then git_patch "hearpulsing-dahtool.patch" # hearpulsing fi fi } install_dahdi() { install_kernel_headers instantiate_repo if [ "$KSRC" != "" ]; then if [ ! -d "$KSRC" ]; then die "KSRC directory does not exist: $KSRC" elif [ ! -f "$KSRC/.config" ]; then die "$KSRC/.config does not exist" fi fi # Avoid "Skipping BTF generation for ... due to unavailability of vmlinux" # Worked around by copying vmlinux to another location: if [ -f /sys/kernel/btf/vmlinux ]; then if [ -d /usr/lib/modules/`uname -r`/build/ ]; then cp /sys/kernel/btf/vmlinux /usr/lib/modules/`uname -r`/build/ else printf "Couldn't find kernel modules build dir for kernel %s\n" $( uname -r ) ls -la /usr/lib/modules fi else echoerr "Couldn't find vmlinux... BTF generation may be skipped during driver install..." fi # Fix missing resolve_btfids # https://github.com/aircrack-ng/rtl8188eus/issues/263#issuecomment-1715699688 # Fixed by commenting out lines 61-63 KERNEL_MM=$( uname -r | cut -d'.' -f1-2 ) printf "Kernel major.minor version is %s\n" "$KERNEL_MM" KBUILD_DIR="/usr/lib/linux-kbuild-${KERNEL_MM}" # Check if this directory exists, otherwise try looking in /usr/src # This is for openSUSE compatibility if [ ! -d "$KBUILD_DIR" ]; then # RPi OS/Debian 13 use the full kernel version string for their kbuild directory, # So we'll check for that first before checking /usr/src. KERNEL_VER=$( uname -r | cut -d'-' -f1-1) printf "No /usr/lib/linux-kbuild-major.minor dir, checking for dir with full kernel version (${KERNEL_VER})...\n" KBUILD_DIR="/usr/lib/linux-kbuild-${KERNEL_VER}" if [ ! -d "$KBUILD_DIR" ]; then printf "No build directory found in /usr/lib, checking /usr/src for ${KERNEL_VER}...\n" KBUILD_DIR="/usr/src/linux-${KERNEL_VER}" fi fi if [ -d "$KBUILD_DIR" ]; then MODFINAL_FILE="${KBUILD_DIR}/scripts/Makefile.modfinal" if [ -f "$MODFINAL_FILE" ]; then sed -n 61,63p $MODFINAL_FILE sed -n 61,63p $MODFINAL_FILE | grep "CONFIG_DEBUG_INFO_BTF_MODULES" if [ $? -eq 0 ]; then # The file only needs to be patched the first time, not on future installs phreak_tree_patch_forward_only $MODFINAL_FILE "modfinal.diff" sed -n 61,63p $MODFINAL_FILE else echoerr "Skipping modfinal patch, expected content differs on line 61" fi else echoerr "Could not determine path to Makefile.modfinal" fi else echoerr "Could not determine path to kbuild dir" fi if [ "$OFFLINE_INSTALL" = "1" ]; then # Requests to downloads.digium.com usually use IPv4, but sometimes use IPv6 # This is problematic on GitHub Action Runners, which have IPv6 disabled, # and won't let you enable it IPV6_DISABLED=0 if which sysctl > /dev/null; then # See https://github.com/asterisk/asterisk-ci-actions/blob/main/SetupUbuntuRunner/action.yml printf "IPv6 Disabled: " sysctl net.ipv6.conf.all.disable_ipv6 IPV6_DISABLED=$( sysctl net.ipv6.conf.all.disable_ipv6 | cut -d '=' -f2 | xargs | tr -d '\n' ) fi fi if [ "$OPENR2" = "1" ]; then if [ "$OFFLINE_INSTALL" = "1" ]; then cd $AST_SOURCE_PARENT_DIR cp -r $OFFLINE_DIR/openr2 . else get_openr2_source fi build_openr2 fi if [ "$OFFLINE_INSTALL" = "1" ]; then cp -r $OFFLINE_DIR/dahlin-offline . else get_dahlin_source fi KERN_VER_MM=$( uname -r | cut -d. -f1-2 ) OS_DIST_2=$( printf "$OS_DIST_INFO" | cut -d' ' -f1-2) if [ "$KERN_VER_MM" = "4.18" ] && [ "$OS_DIST_2" = "Rocky Linux" ]; then # See comments at bottom of: https://github.com/asterisk/dahdi-linux/issues/19 # We need to remove #if LINUX_VERSION_CODE >= KERNEL_VERSION(6, 1, 0) and #endif # so that this macro takes effect unconditionally on these platforms (4.18 kernel) printf "Detected older kernel that requires the netif_napi_add patch regardless...\n" # This only appears once, so it's fine to play fast and loose with sed here... # This will trigger a warning, but DAHDI Linux does not use -Werror so this is fine # If it did, this path would need to #undef first before the #define # /usr/src/dahdi-linux-3.3.0/include/dahdi/kernel.h:62: warning: "netif_napi_add" redefined sed -i 's/KERNEL_VERSION(6, 1, 0)/KERNEL_VERSION(4, 18, 0)/g' include/dahdi/kernel.h fi DAHDI_CFLAGS="" if [ "$GENERIC_HEADERS" = "1" ]; then if [ -f /etc/redhat-release ]; then ls /usr/src/kernels hdrver=`ls /usr/src/kernels` else ls -la /lib/modules/ hdrver=`ls /lib/modules` fi DAHDI_CFLAGS="KVERS=$hdrver" # overwrite from exact match with uname -r to whatever we happen to have printf "We do NOT have an exact kernel match: %s\n" "$hdrver" else printf "We have an exact kernel match: " uname -r fi # If IPv6 is disabled, force wget downloads to use the IPv4 address # Could also use --prefer-family, but is IPv6 is disabled, we have to use IPv4 anyways if [ "$IPV6_DISABLED" = "1" ]; then echoerr "IPv6 is disabled, forcing driver downloads to use only IPv4..." sed -i 's/WGET_ARGS:=--continue/WGET_ARGS:=--inet4-only --continue/g' drivers/dahdi/firmware/Makefile grep "WGET" drivers/dahdi/firmware/Makefile fi if [ "$DAHDI_OLD_DRIVERS" = "1" ]; then # For some reason, tor2 won't compile on older kernels due to missing target for "makefw" # But if we compile it by its full name first, that takes care of that # TODO BUGBUG This is a build order bug that should be addressed in the build system $AST_MAKE $AST_SOURCE_PARENT_DIR/$DAHDI_LIN_SRC_DIR/drivers/dahdi/makefw $DAHDI_CFLAGS fi # if KSRC/KVERS env vars are set, they will automatically propagate to children $AST_MAKE $DAHDI_CFLAGS if [ $? -ne 0 ]; then echoerr "DAHDI Linux compilation failed, aborting install" if [ "$DAHDI_DISABLE_VPMADT032" != "1" ]; then echoerr "*** Suggestion ***" echoerr "If using a newer kernel, consider retrying install with --disable-vpmadt032 if VPMADT032 echo canceller is not required." echoerr "" echoerr "*** More Details ***" echoerr "As you may know, Sangoma has not been maintaining DAHDI for years, even to perform adequate maintenance," echoerr "and DAHDI is currently community maintained, e.g. via PhreakScript." echoerr "However, the VPMADT032 EC requires a binary firmware blob, an updated version of which is required," echoerr "and which can only come from Sangoma. As a result, until Sangoma gets their act together," echoerr "if you use an affected kernel version, the only way to successfully build DAHDI Linux" echoerr "is to either:" echoerr "1) Disable this driver, and that is what --disable-vpmadt032 does." echoerr "2) Build the kernel from source, applying this patch: https://github.com/InterLinked1/phreakscript/blob/master/patches/objtool_check_nonfatal.diff" echoerr " (There are some examples of this in the CI, if you choose this route: https://github.com/InterLinked1/phreakscript/blob/master/.github/workflows/main.yml)" echoerr "" echoerr "See this issue for more details: https://github.com/asterisk/dahdi-linux/issues/97" echoerr "" echoerr "The only way to get this fixed is to get Sangoma to do something about it." echoerr "We suggest you call Sangoma to file a complaint at (877) 344-4861 x2,3,5" echoerr "or by opening a case online at https://help.sangoma.com/s/" echoerr "Otherwise, they will continue doing nothing, just like they have been." fi exit 1 fi $AST_MAKE install $DAHDI_CFLAGS # DAHDI Tools if [ "$OFFLINE_INSTALL" = "1" ]; then cp -r $OFFLINE_DIR/dahtool-offline . else get_dahtool_source fi autoreconf -i && [ -f config.status ] || ./configure --with-dahdi=../linux # https://issues.asterisk.org/jira/browse/DAHTOOL-84 ./configure # Both configures are needed! $AST_MAKE -j$(nproc) $DAHDI_CFLAGS if [ $? -ne 0 ]; then die "DAHDI Tools compilation failed, aborting install" fi $AST_MAKE install $AST_MAKE install-config if [ -d /usr/include/dahdi ] && [ -f /usr/include/dahdi/user.h ] && [ ! -f /usr/include/dahdi/tonezone.h ]; then # For some reason, tonezone.h (which is part of dahdi-tools, not dahdi-linux), ends up not installed # in the system headers directory on some systems (e.g. Arch Linux) # Just copy it there manually in this case echoerr "tonezone.h was not found to be installed in the system headers... manually installing it" cp tonezone.h /usr/include/dahdi fi # Ensure that dahdi_tool is installed, since it's not built if the prereqs weren't available at compile time. if ! which "dahdi_tool" > /dev/null; then echoerr "dahdi_tool does not appear to have been built successfully... newt development package missing?" if [ "$FORCE_INSTALL" != "1" ] && [ "$PAC_MAN" != "pacman" ] && [ "$PAC_MAN" != "yum" ]; then # Even though we successfully install the newt dev package on Arch Linux / Fedora 42, for some reason this still fails, so don't make it fatal on those exit 1 fi fi # All right, here we go... dahdi_scan -vvvvv if [ ! -f /etc/dahdi/system.conf ]; then printf "%s\n" "Generating /etc/dahdi/system.conf for the first time..." service dahdi restart dahdi_genconf -vvvvv else echoerr "/etc/dahdi/system.conf already exists, not overwriting..." service dahdi restart fi dahdi_cfg -vvvvv dahdi_hardware if [ -f /etc/dahdi/modules ]; then cat /etc/dahdi/modules # modprobe else echoerr "No DAHDI modules present" fi lsdahdi # Verify what we did... cat /etc/dahdi/system.conf if [ $? -ne 0 ]; then echo "Uh oh, no /etc/dahdi/system.conf ???" fi if [ -f /etc/dahdi/assigned-spans.conf ]; then cat /etc/dahdi/assigned-spans.conf else echoerr "No assigned spans" fi if [ -f $AST_CONFIG_DIR/dahdi-channels.conf ]; then cat $AST_CONFIG_DIR/dahdi-channels.conf else echoerr "No DAHDI channels" fi # LibPRI # https://gist.github.com/debuggerboy/3028532 if [ "$INSTALL_LIBPRI" != "0" ]; then cd $AST_SOURCE_PARENT_DIR import_source http://downloads.asterisk.org/pub/telephony/libpri/releases/${LIBPRI_SOURCE_NAME}.tar.gz $OFFLINE_DIR/libpri.tar.gz tar -zxvf ${LIBPRI_SOURCE_NAME}.tar.gz rm ${LIBPRI_SOURCE_NAME}.tar.gz cd ${LIBPRI_SOURCE_NAME} # Not yet merged to master: github_apply_pr "asterisk/libpri" "12" # Use signal.h instead of sys/signal.h for musl compatibility $AST_MAKE && $AST_MAKE install if [ $? -ne 0 ]; then exit 1 fi fi # LibSS7 if [ "$INSTALL_LIBSS7" != "0" ]; then cd $AST_SOURCE_PARENT_DIR import_source https://github.com/asterisk/libss7/archive/refs/tags/${LIBSS7_VERSION}.tar.gz $OFFLINE_DIR/libss7.tar.gz tar -zxvf ${LIBSS7_VERSION}.tar.gz rm ${LIBSS7_VERSION}.tar.gz cd libss7-${LIBSS7_VERSION} # Not yet merged to master: github_apply_pr "asterisk/libss7" "5" # Use const char if possible for APIs github_apply_pr "asterisk/libss7" "7" # Use poll.h instead of sys/poll.h $AST_MAKE && $AST_MAKE install if [ $? -ne 0 ]; then exit 1 fi fi # Wanpipe if [ "$DAHDI_WANPIPE" = "1" ]; then install_wanpipe fi service dahdi restart # Completion message for users just running "phreaknet dahdi" echog "DAHDI and friends have finished installing" } phreak_tree_module() { # $1 = file to patch, $2 = whether failure is acceptable printf "Adding new module: %s\n" "$1" cp "$GIT_REPO_PATH/$1" "$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/$1" if [ $? -ne 0 ]; then echoerr "Failed to copy module: $1" if [ "$2" != "1" ]; then # unless failure is acceptable, abort exit 2 fi fi } phreak_nontree_patch() { # $1 = patched file, $2 = patch name printf "Applying patch %s to %s\n" "$2" "$1" $WGET "$3" -O "/tmp/$2" if [ $? -ne 0 ]; then die "Failed to download patch: $2" fi patch -u -b "$1" -i "/tmp/$2" if [ $? -ne 0 ]; then die "Failed to apply patch $2" fi rm "/tmp/$2" } phreak_tree_patch() { # $1 = patched file, $2 = patch name printf "Applying patch %s to %s\n" "$2" "$1" cp "$GIT_REPO_PATH/patches/$2" "/tmp/$2" if [ $? -ne 0 ]; then die "Failed to copy patch: $2" fi patch -u -b "$1" -i "/tmp/$2" if [ $? -ne 0 ]; then die "Failed to apply patch $2" fi rm "/tmp/$2" } phreak_tree_patch_forward_only() { # $1 = patched file, $2 = patch name printf "Applying forward patch %s to %s\n" "$2" "$1" cp "$GIT_REPO_PATH/patches/$2" "/tmp/$2" if [ $? -ne 0 ]; then die "Failed to copy patch: $2" fi patch -u -N -b "$1" -i "/tmp/$2" rm "/tmp/$2" } phreak_fuzzy_patch() { printf "Applying patch %s to %s\n" "$1" "$1" cp "$GIT_REPO_PATH/patches/$1" "/tmp/$1" if [ $? -ne 0 ]; then die "Failed to download patch: $1" fi patch -p1 < "/tmp/$1" if [ $? -ne 0 ]; then ls -la "/tmp/$1" die "Failed to apply patch $1" fi rm "/tmp/$1" } custom_fuzzy_patch() { printf "Applying patch %s to %s\n" "$1" "$1" $WGET "$2" -O "/tmp/$1" if [ $? -ne 0 ]; then die "Failed to download patch: $1" fi patch -p1 < "/tmp/$1" if [ $? -ne 0 ]; then ls -la "/tmp/$1" die "Failed to apply patch $1" fi rm "/tmp/$1" } # Only for numbered versions, not for master # $1 = maximum version to match for a branch (non inclusive), e.g. 210100 for 21.1.0 # $2 = PR number asterisk_pr_if_single() { mm_desired=`echo $1 | cut -c 1-2` if [ "$1" != "" ]; then # This is C-style integer division, which is what we want mm=$(( $AST_MM_VER / 10000 )) if [ "$mm" = "$mm_desired" ]; then if [ $AST_MM_VER -lt $1 ]; then printf "Applying PR %d because $AST_MM_VER matches %d and < %s\n" $2 "$mm_desired" "$1" asterisk_pr $2 0 fi fi fi } asterisk_pr_if() { # If we're master, patch never applies since we're already merged if [ $AST_MM_VER -eq 999999 ]; then printf "Skipping patch of PR %d since already merged into master\n" $1 return fi asterisk_pr_if_single $2 $1 asterisk_pr_if_single $3 $1 asterisk_pr_if_single $4 $1 if [ "$5" != "" ]; then # At some times of the year, there will be 4 branches actively supported asterisk_pr_if_single $5 $1 fi } asterisk_pr_unconditional() { printf "Applying PR %d unconditionally\n" $1 asterisk_pr $1 } custom_module() { # $1 = filename, $2 = URL to download printf "Adding new module: %s\n" "$1" $WGET "$2" -O "$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/$1" if [ $? -ne 0 ]; then # Use wget without -q to see more details wget "$2" -O "$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/$1" fi if [ $? -ne 0 ]; then echoerr "Failed to download module: $1" if [ "$2" != "1" ]; then # unless failure is acceptable, abort exit 2 fi fi } add_experimental() { custom_module "include/asterisk/res_pjsip_body_generator_types.h" "https://code.phreaknet.org/asterisk/res_pjsip_body_generator_types.h" custom_module "res/res_pjsip_device_features.c" "https://code.phreaknet.org/asterisk/res_pjsip_device_features.c" custom_module "res/res_pjsip_device_features_body_generator.c" "https://code.phreaknet.org/asterisk/res_pjsip_device_features_body_generator.c" custom_module "res/res_pjsip_sca.c" "https://code.phreaknet.org/asterisk/res_pjsip_sca.c" custom_module "res/res_pjsip_sca_body_generator.c" "https://code.phreaknet.org/asterisk/res_pjsip_sca_body_generator.c" } build_g72x() { cd $AST_SOURCE_PARENT_DIR echoerr "WARNING: G.723 is not currently supported, due to unavailability of compatible Intel IPP and lack of developer support. Only G.729 will be supported." sleep 1 if [ "$OFFLINE_INSTALL" = "1" ]; then cp -r $OFFLINE_DIR/bcg729 . cp -r $OFFLINE_DIR/asterisk-g72x . else git clone --depth 1 https://github.com/BelledonneCommunications/bcg729.git git clone --depth 1 https://github.com/arkadijs/asterisk-g72x.git fi cd bcg729 ensure_installed cmake cmake . $AST_MAKE && $AST_MAKE install cd .. cd asterisk-g72x ./autogen.sh ./configure --with-bcg729 $AST_MAKE && $AST_MAKE install if [ ! -f /usr/lib/asterisk/modules/codec_g729.so ]; then echoerr "Failed to build G.729 codec" fi } get_sccp_source() { cd $AST_SOURCE_PARENT_DIR # The SCCP repo is currently stagnant, so if it's present, then just use the latest 'develop' HEAD and apply any needed patches if [ -d chan-sccp ]; then cd chan-sccp git checkout . git clean -df else git clone --depth 1 "https://github.com/chan-sccp/chan-sccp.git" cd chan-sccp fi if [ $? -eq 0 ]; then if [ $AST_MAJOR_VER -ge 21 ]; then github_apply_pr "chan-sccp/chan-sccp" "611" # Remove macros, or it won't even compile fi github_apply_pr "chan-sccp/chan-sccp" "626" # Fix compilation with AST_DEV_MODE and DEBUG_FD_LEAKS fi } build_sccp() { cd $AST_SOURCE_PARENT_DIR if [ ! -d chan-sccp ]; then die "chan-sccp source directory not found" fi cd chan-sccp ./configure --enable-conference --enable-advanced-functions --with-asterisk=$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR $AST_MAKE -j$(nproc) && $AST_MAKE install && $AST_MAKE reload if [ $? -ne 0 ]; then die "Failed to install chan_sccp" fi } get_openr2_source() { cd $AST_SOURCE_PARENT_DIR # The OpenR2 repo is currently stagnant, so if it's present, then just use the latest 'develop' HEAD and apply any needed patches if [ -d openr2 ]; then cd openr2 git checkout . git clean -df else git clone --depth 1 "https://github.com/moises-silva/openr2.git" cd openr2 fi } build_openr2() { cd $AST_SOURCE_PARENT_DIR if [ ! -d openr2 ]; then die "openr2 source directory not found" fi cd openr2 git_patch "openr2.diff" # r2test fails to install during 'make install', so skip it ./configure --prefix=/usr --without-r2test # This will initially fail, due to the fix needed below $AST_MAKE -j$(nproc) CFLAGS=-Wno-pedantic # src/libopenr2.la won't exist when we start compiling, but it will exist by this point sed -i "s/inherited_linker_flags=''/inherited_linker_flags=' -shared'/g" src/libopenr2.la # otherwise it will fail when linking # Now, we can finish the job: $AST_MAKE CFLAGS=-Wno-pedantic if [ $? -ne 0 ]; then die "Failed to build OpenR2" fi # Without --without-r2test, this may return non-zero due to r2test missing $AST_MAKE install if [ $? -ne 0 ]; then die "Failed to install OpenR2" fi # If this symbol isn't exported, then HAVE_OPENR2 will not be defined for Asterisk later readelf -s /usr/lib64/libopenr2.so | grep "openr2_chan_new" if [ $? -ne 0 ]; then echoerr "libopenr2.so does not appear to export openr2_chan_new, OpenR2 build may be incomplete" fi } # Instantiate an instance of the PhreakScript repository, if not already present # This is necessary since this script file is designed to be able to be used standalone, # without the rest of the repository necessarily being present. instantiate_repo() { # GitHub no longers allows svn access (which was useful to download a subset of a repo) # Settle for using a shallow clone # At this point, this is more efficient than individually downloading all of the files # used by phreak_tree_module and phreak_tree_patch. if [ "${GIT_REPO_PATH}" = "" ]; then # pushd is a bashism, can't use it! ORIG_DIR="$PWD" cd /tmp if [ ! -d phreakscript ]; then printf "GIT_REPO_PATH not already set and not found in /tmp, cloning...\n" git clone --depth=1 https://github.com/InterLinked1/phreakscript.git else printf "GIT_REPO_PATH not already set but found in /tmp, updating...\n" cd /tmp/phreakscript git checkout master git pull fi GIT_REPO_PATH=/tmp/phreakscript if [ ! -d $GIT_REPO_PATH ]; then die "Directory does not exist: $GIT_REPO_PATH" fi printf "GIT_REPO_PATH is now %s\n" "$GIT_REPO_PATH" cd "$ORIG_DIR" else printf "GIT_REPO_PATH already provided: %s\n" "$GIT_REPO_PATH" if [ ! -d "$GIT_REPO_PATH" ]; then die "Directory does not exist: $GIT_REPO_PATH" fi fi } phreak_patches() { ### Inject custom PhreakNet patches to add additional functionality and features. ### If/when/as these are integrated upstream, they will be removed from this function. cd $AST_SOURCE_PARENT_DIR/$AST_SRC_DIR ## Add Standalone PhreakNet Modules # XXX In theory, something like cp $GIT_REPO_PATH/apps/*.c apps, etc. would also suffice, rather than enumerating phreak_tree_module "apps/app_acts.c" phreak_tree_module "apps/app_assert.c" phreak_tree_module "apps/app_audichron.c" phreak_tree_module "apps/app_callback.c" phreak_tree_module "apps/app_callerid.c" phreak_tree_module "apps/app_coin.c" phreak_tree_module "apps/app_ccsa.c" phreak_tree_module "apps/app_dahdimonitor.c" phreak_tree_module "apps/app_dialtone.c" phreak_tree_module "apps/app_ffplayer.c" phreak_tree_module "apps/app_fsk.c" phreak_tree_module "apps/app_frame.c" phreak_tree_module "apps/app_george.c" phreak_tree_module "apps/app_hookstate.c" phreak_tree_module "apps/app_keyprefetch.c" phreak_tree_module "apps/app_loopplayback.c" phreak_tree_module "apps/app_mail.c" phreak_tree_module "apps/app_memory.c" phreak_tree_module "apps/app_mwi.c" phreak_tree_module "apps/app_partialplayback.c" phreak_tree_module "apps/app_playdigits.c" phreak_tree_module "apps/app_polycompush.c" phreak_tree_module "apps/app_predial.c" phreak_tree_module "apps/app_pulsar.c" phreak_tree_module "apps/app_r2.c" # could theoretically be upstreamed, but I'd like to get compelled signaling working properly first phreak_tree_module "apps/app_randomplayback.c" phreak_tree_module "apps/app_remoteaccess.c" phreak_tree_module "apps/app_saytelnumber.c" phreak_tree_module "apps/app_selective.c" phreak_tree_module "apps/app_softmodem.c" phreak_tree_module "apps/app_streamsilence.c" phreak_tree_module "apps/app_tonetest.c" phreak_tree_module "apps/app_verify.c" phreak_tree_module "apps/app_wakeupcall.c" phreak_tree_module "apps/app_wrappers.c" phreak_tree_module "configs/samples/verify.conf.sample" "1" # will fail for obsolete versions of Asterisk b/c of different directory structure, okay. phreak_tree_module "configs/samples/irc.conf.sample" "1" # will fail for obsolete versions of Asterisk b/c of different directory structure, okay. phreak_tree_module "configs/samples/res_alarmsystem.conf.sample" "1" phreak_tree_module "configs/samples/res_phreaknet.conf.sample" "1" phreak_tree_module "configs/samples/res_smdr_whozz.conf.sample" "1" phreak_tree_module "configs/samples/res_telos_1a2.conf.sample" "1" phreak_tree_module "funcs/func_dbchan.c" phreak_tree_module "funcs/func_dtmf_flash.c" phreak_tree_module "funcs/func_dtmf_trace.c" phreak_tree_module "funcs/func_euniqueid.c" phreak_tree_module "funcs/func_message_sub.c" phreak_tree_module "funcs/func_nanpa.c" phreak_tree_module "funcs/func_notchfilter.c" phreak_tree_module "funcs/func_numpeer.c" phreak_tree_module "funcs/func_query.c" phreak_tree_module "funcs/func_resonance.c" phreak_tree_module "funcs/func_tech.c" phreak_tree_module "res/res_coindetect.c" phreak_tree_module "res/res_alarmsystem.c" phreak_tree_module "res/res_digitmap.c" phreak_tree_module "res/res_irc.c" phreak_tree_module "res/res_msp.c" phreak_tree_module "res/res_pbx_validate.c" phreak_tree_module "res/res_phreaknet.c" phreak_tree_module "res/res_pjsip_presence.c" phreak_tree_module "res/res_smdr_whozz.c" phreak_tree_module "res/res_telos_1a2.c" if [ "$DEVMODE" = "1" ]; then phreak_tree_module "res/res_deadlock.c" # this is not possibly useful to non-developers fi if [ -d /etc/dahdi ]; then phreak_tree_module "apps/app_loopdisconnect.c" if [ "$RTPULSING" = "1" ]; then phreak_tree_module "res/res_dialpulse.c" fi fi ## Third Party Modules if [ "$HAVE_COMPATIBLE_SPANDSP" = "1" ]; then download_github_module "dgorski/app_tdd" "main" "app_tdd.c" "apps/app_tdd.c" fi ## Add patches to existing modules phreak_tree_patch "apps/app_stack.c" "returnif.patch" # Add ReturnIf application if [ "$ENHANCED_CHAN_SIP" != "1" ]; then phreak_tree_patch "channels/chan_sip.c" "sipfaxcontrol.diff" # chan_sip: Add fax timing controls fi phreak_tree_patch "main/loader.c" "loader_deprecated.patch" # Don't throw alarmist warnings for deprecated ADSI modules that aren't being removed phreak_tree_patch "main/manager_channels.c" "disablenewexten.diff" # Disable Newexten event, which significantly degrades dialplan performance phreak_tree_patch "main/dsp.c" "coindsp.patch" # DSP additions # Enhanced chan_sip already has this included if [ "$ENHANCED_CHAN_SIP" != "1" ] && [ "$SIP_CISCO" != "1" ]; then # XXX this patch has a merge conflict with SIP usecallmanager patches git_patch "sipcustparams.patch" # chan_sip: Add custom parameter support, adds SIP_PARAMETER function. fi if [ "$HEARPULSING" = "1" ]; then git_patch "hearpulsing-ast.diff" # DAHDI hearpulsing fi if [ "$WEAK_TLS" = "1" ]; then phreak_tree_patch "res/res_srtp.c" "srtp.diff" # Temper SRTCP unprotect warnings. Only beneficial for older ATAs that require older TLS protocols. fi printf "Applying patches applicable to %s -> %d (~%s)\n" "$AST_ALT_VER" "$AST_MM_VER" "$AST_MAJOR_VER" ## Merged into master, but master only (won't be in a release version until next standard release) if [ $AST_MAJOR_VER -lt 23 ]; then asterisk_pr_unconditional 961 # config.c: fix template inheritance/overrides. asterisk_pr_unconditional 245 # config.c: fix template inheritance/overrides. asterisk_pr_unconditional 1223 # func_callerid: Format ANI2 as two digits (MASTER ONLY) fi ## Merged, not yet in a release version (use asterisk_pr_if, e.g. asterisk_pr_if 1234 220400 210900 201400) asterisk_pr_if 1879 230400 221000 202000 # chan_iax2: Add auth_method property getter #asterisk_pr_if 1805 230300 220900 201900 # dsp.c: Add support for detecting R2 signaling tones. Disabled, patch doesn't cleanly apply. if [ $AST_MAJOR_VER -le 23 ]; then rm apps/app_r2.c # Only build app_r2 in master, until the next release comes out fi ## Unmerged patches: remove or switch to asterisk_pr_if once merged (hopefully soon) # Stagnant patches: hopefully will be merged eventually, but not in the near term #asterisk_pr_unconditional 292 # GROUP VARs. The current version of this patch on Git is unstable and causes frequent crashes. Do not use it. git_patch "groupvars_old.diff" # This is an older version of the GROUP VARs patch (PR #292) that is stable and does not cause issues. Until the PR is fixed, we use this one. asterisk_pr_unconditional 1504 # func_channel: Allow manually changing audio format during a call asterisk_pr_unconditional 1513 # app_mixmonitor: Prevent recording to same file multiple times # Out of tree patches git_patch "dahdicleanup.diff" if [ $AST_MAJOR_VER -lt 21 ]; then if [ "$EXTERNAL_CODECS" = "1" ]; then phreak_nontree_patch "main/translate.c" "translate.diff" "https://issues-archive.asterisk.org/attachments/29/ASTERISK-29455/00-translate.diff" # Bug fix to translation code else # WARNING: This will cause a crash due to ABI incompatibility if any external codecs are used. Use the older translate.diff patch in that case. # This has been merged into master, but for the above reason will not appear in Asterisk until v21 when new binary codec modules are created for external codecs. git_patch "translate_c_Prefer_better_codecs_on_ties.patch" # translate.c: Prefer better codecs on ties. fi fi if [ "$RTPULSING" = "1" ]; then # Patches split up to make it easier to selectively redo the 2nd one if a patch conflict occurs and the patch needs to be rebased. git_patch "ast_rtoutpulsing_core.diff" git_patch "ast_rtoutpulsing_funcs.diff" git_patch "ast_rtoutpulsing_channels.diff" git_patch "ast_rtoutpulsing2.diff" # chan_dahdi: add rtoutpulsing fi # Out of tree patches git_patch "app_confbridge_Fix_bridge_shutdown_race_condition.patch" # app_confbridge: Fix bridge shutdown race condition git_patch "blueboxing.diff" # dsp: make blue boxing easier git_patch "prefixinclude.diff" # pbx: prefix includes git_patch "asterisk-prevent-duplicate-processes.diff" # Prevent duplicate Asterisk process creation git_patch "agi_record_noisefirst.diff" # res_agi: Add noise before silence detection option to Record AGI. Patch no longer applies after https://github.com/asterisk/asterisk/pull/1772 if [ "$EXPERIMENTAL_FEATURES" = "1" ] && [ $AST_MAJOR_VER -ge 21 ]; then printf "Installing 21+ patches for experimental features\n" add_experimental fi } universal_patches() { asterisk_pr_if 1370 230000 220600 211100 201600 # test_res_prometheus compiler fixes } freebsd_port_patch() { filename=$( basename $1 ) download_github_file "freebsd/freebsd-ports" "master" "$1" "$filename" affectedfile=$( head -n 2 $filename | tail -n 1 | cut -d' ' -f2 ) if [ ! -f "$affectedfile" ]; then die "File does not exist: $affectedfile (patched by $filename)" fi patch $affectedfile -i $filename rm "$filename" } freebsd_port_patches() { # https://github.com/freebsd/freebsd-ports/tree/7abe6caf38ac7e552642372be9b4136c4354d0fd/net/asterisk18/files # todo: some of these are obsolete and some can be integrated upstream printf "%s\n" "Applying FreeBSD Port Patches..." freebsd_port_patch "net/asterisk18/files/patch-Makefile" freebsd_port_patch "net/asterisk18/files/patch-agi_Makefile" freebsd_port_patch "net/asterisk18/files/patch-channels_chan__dahdi.c" if [ "$CHAN_SIP" = "1" ]; then freebsd_port_patch "net/asterisk18/files/patch-channels_sip_include_sip.h" fi freebsd_port_patch "net/asterisk18/files/patch-configure" freebsd_port_patch "net/asterisk18/files/patch-contrib_Makefile" freebsd_port_patch "net/asterisk18/files/patch-main_Makefile" freebsd_port_patch "net/asterisk18/files/patch-main_asterisk.exports.in" freebsd_port_patch "net/asterisk18/files/patch-main_http.c" freebsd_port_patch "net/asterisk18/files/patch-main_lock.c" freebsd_port_patch "net/asterisk18/files/patch-third-party_pjproject_Makefile" #freebsd_port_patch "net/asterisk18/files/patch-third-party_pjproject_Makefile.rules" printf "%s\n" "FreeBSD patching complete..." } install_odbc() { # https://wiki.asterisk.org/wiki/display/AST/Getting+Asterisk+Connected+to+MySQL+via+ODBC if [ "$PAC_MAN" = "apt-get" ]; then # unixodbc is what contains isql install_package "unixodbc unixodbc-dev odbcinst" fi cd $AST_SOURCE_PARENT_DIR # http://www.unixodbc.org/ to get isql (if desired for manual testing) # https://mariadb.com/downloads/#connectors # |-> https://downloads.mariadb.com/Connectors/odbc/connector-odbc-3.1.11/ # |---> https://downloads.mariadb.com/Connectors/odbc/connector-odbc-3.1.11/mariadb-connector-odbc-3.1.11-debian-buster-amd64.tar.gz $WGET https://downloads.mariadb.com/Connectors/odbc/connector-odbc-$ODBC_VER/mariadb-connector-odbc-$ODBC_VER-debian-buster-amd64.tar.gz if [ $? -ne 0 ]; then die "MariaDB ODBC download failed" fi tar -zxvf mariadb-connector-odbc-$ODBC_VER-debian-buster-amd64.tar.gz cd mariadb-connector-odbc-$ODBC_VER-debian-buster-amd64/lib/mariadb if [ ! -d /usr/lib/x86_64-linux-gnu/odbc/ ]; then mkdir /usr/lib/x86_64-linux-gnu/odbc/ fi cp libmaodbc.so /usr/lib/x86_64-linux-gnu/odbc/ cp libmariadb.so /usr/lib/x86_64-linux-gnu/odbc/ cd $AST_SOURCE_PARENT_DIR rm mariadb-connector-odbc-$ODBC_VER-debian-buster-amd64.tar.gz odbcinst -j if [ $? -ne 0 ]; then die "odbcinst failed" fi echo "[MariaDB]" > mariadb.ini echo "Description = Maria DB" >> mariadb.ini echo "Driver = /usr/lib/x86_64-linux-gnu/odbc/libmaodbc.so" >> mariadb.ini echo "Setup = /usr/lib/x86_64-linux-gnu/odbc/libodbcmyS.so" >> mariadb.ini odbcinst -i -d -f mariadb.ini rm mariadb.ini # https://wiki.asterisk.org/wiki/display/AST/Getting+Asterisk+Connected+to+MySQL+via+ODBC # https://wiki.asterisk.org/wiki/display/AST/Configuring+res_odbc # http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/installing_configuring_odbc.html#database_validating-odbc if grep "asterisk" /etc/odbc.ini > /dev/null ; then printf "%s\n" "Asterisk-related ODBC config already detected in /etc/odbc.ini" else echo "[asterisk-connector]" > /etc/odbc.ini echo "Description = MySQL connection to 'asterisk' database" >> /etc/odbc.ini echo "Driver = MariaDB" >> /etc/odbc.ini echo "Database = asterisk" >> /etc/odbc.ini echo "Server = localhost" >> /etc/odbc.ini echo "Port = 3306" >> /etc/odbc.ini echo "Socket = /var/run/mysqld/mysqld.sock" >> /etc/odbc.ini fi } paste_post() { # $1 = file to upload, $2 = 1 to delete file on success, $3 = auto-email to business office if [ ${#INTERLINKED_APIKEY} -eq 0 ]; then INTERLINKED_APIKEY=`grep -R "interlinkedkey=" $AST_CONFIG_DIR | grep -v "your-interlinked-api-key" | cut -d'=' -f2 | awk '{print $1;}' | head -n 1` if [ ${#INTERLINKED_APIKEY} -lt 30 ]; then echoerr "Failed to find InterLinked API key. For future use, please set your [globals] variables, e.g. by running phreaknet config" printf '\a' # alert the user read -r -p "InterLinked API key: " INTERLINKED_APIKEY if [ ${#INTERLINKED_APIKEY} -lt 30 ]; then ls $1 die "InterLinked API key too short. Not going to attempt uploading paste..." fi fi fi if [ "$3" = "1" ]; then url=`curl -X POST -F "body=@$1" -F "key=$INTERLINKED_APIKEY" -F "notifyuser=InterLinked" -F "expiry=259200" https://paste.interlinked.us/api/` else url=`curl -X POST -F "body=@$1" -F "key=$INTERLINKED_APIKEY" https://paste.interlinked.us/api/` fi invstring=`expr substr "${url}" 1 7` # POSIX compliant if [ "$invstring" = "Invalid" ]; then echoerr "Invalid API key" printf "File Location: %s\n" "$1" else printf "Paste URL: %s\n" "${url}.txt" if [ "$2" = "1" ]; then rm "$1" fi fi } quell_mysql() { if [ -f "/etc/init.d/mysql" ]; then if [ "$FORCE_INSTALL" = "1" ]; then printf "%s\n" "Restarting MySQL/MariaDB service..." # mysql uses up a lot of CPU and memory, and will really slow down the coredumper script (or compilation) service mysql restart fi fi } coredump_prep() { ensure_installed "gdb" # for astcoredumper # For some reason, the above is not sufficient and will lead to things like: /usr/bin/gdb does not support python # That's because gdb isn't really installed. # Use a technique aside from which/path/binary detection to see if we find something we expect: helplines=`gdb --help | grep "GDB manual" | wc -l` if [ "$helplines" != "1" ]; then echoerr "GDB does not appear to be currently installed." if [ "$PAC_MAN" = "apt-get" ]; then apt-get install -y gdb fi else printf "We think GDB is already installed... good!\n" fi # XXX If running ast_coredumper complains about a lack of python support, full gdb was not installed, # and the above check will succeed but we may need to run apt-get install gdb to get the full version. quell_mysql # we need all the CPU and memory we can get swap=`swapon --show | wc -l | tr -d '\n'` if [ "$swap" = "0" ]; then $FILE_PATH enable-swap # enable swap, since we'll probably run out of memory otherwise... fi freediskspace=`df / | awk '{print $4}' | tail -n +2 | tr -d '\n'` if [ $freediskspace -lt 700000 ]; then # A core dump can be around 700 MB, so ensure we have enough space to actually dump it. $FILE_PATH freedisk fi } get_backtrace() { # $1 = "1" to upload dmesg | tail -4 coredump_prep printf "%s" "Core dump pattern is: " sysctl -n kernel.core_pattern # sysctl -w kernel.core_pattern=core printf "%s\n" "Finding core dump to process, this may take a moment..." $AST_VARLIB_DIR/scripts/ast_coredumper > /tmp/ast_coredumper.txt if [ $? -ne 0 ]; then $AST_VARLIB_DIR/scripts/ast_coredumper core > /tmp/ast_coredumper.txt fi if [ $? -ne 0 ]; then mostrecentcoredump=`ls -v * | grep "^core" | tail -1` printf "Most recent core dump: %s\n" "$mostrecentcoredump" $AST_VARLIB_DIR/scripts/ast_coredumper "$mostrecentcoredump" > /tmp/ast_coredumper.txt fi printf "Exit code is %d\n" $? corefullpath=$( grep "full.txt" /tmp/ast_coredumper.txt | cut -d' ' -f2 ) # the file is no longer necessarily simply just /tmp/core-full.txt if [ ! -f /tmp/ast_coredumper.txt ] || [ ${#corefullpath} -le 1 ]; then echoerr "No core dumps found" die "Make sure to start asterisk with -g or set dumpcore=yes in asterisk.conf" fi if [ ${#corefullpath} -eq 0 ] || [ ! -f "$corefullpath" ]; then echoerr "Core dump failed to get backtrace, aborting..." die "Make sure to start asterisk with -g or set dumpcore=yes in asterisk.conf" fi if [ "$1" = "1" ]; then # backtrace printf "%s\n" "Uploading paste of backtrace..." paste_post "$corefullpath" # rm /tmp/core-*.txt # actually, don't delete these, just in case... else # backtrace-only ls $corefullpath fi rm -f /tmp/ast_coredumper.txt ls | grep "^core" | grep -v ".txt" | xargs rm # if core dump itself wasn't automatically deleted, delete it now... but don't remove the backtraces we just extracted! } rule_audio() { cd $AST_SOUNDS_DIR # so we can use both relative and absolute paths # trying to use {} to combine the output of multiple commands causes issues, so do them serially directories="$AST_CONFIG_DIR/" pcregrep -rho1 --include='.*\.conf$' ',Playback\((.*)?\)' $directories | grep -vx ';.*' | cut -d',' -f1 > /tmp/phreakscript_update.txt pcregrep -rho1 --include='.*\.conf$' ',BackGround\((.*)?\)' $directories | grep -vx ';.*' | cut -d',' -f1 >> /tmp/phreakscript_update.txt pcregrep -rho1 --include='.*\.conf$' ',Read\((.*)?\)' $directories | grep -vx ';.*' | cut -s -d',' -f2 | grep -v "dial" | grep -v "stutter" | grep -v "congestion" >> /tmp/phreakscript_update.txt filenames=$(cat /tmp/phreakscript_update.txt | cut -d')' -f1 | tr '&' '\n' | sed '/^$/d' | sort | uniq | grep -v "\${" | xargs -d "\n" -I{} sh -c 'if ! test -f "{}.ulaw"; then echo "{}"; fi') lines=`echo "$filenames" | wc -l` if [ "$lines" -ne "0" ]; then echo "$filenames" > /tmp/phreakscript_results.txt echoerr "WARNING: Missing audio file(s) detected ($lines)" while read filename do grep -rnRE --include \*.conf "[,&\(]$filename" $directories | grep -v ":;" | grep -v ",dial," | grep -v ",stutter," | grep -E "Playback|BackGround|Read" | grep --color "$filename" done < /tmp/phreakscript_results.txt # POSIX compliant rm /tmp/phreakscript_results.txt else echo "No missing sound files detected..." fi rm /tmp/phreakscript_update.txt warnings=$(($warnings + $lines)) cd /tmp } rule_invalid_jump() { results=$(pcregrep -ro3 --include='.*\.conf$' -hi '([1n\)]),(Goto|Gosub|GotoIf|GosubIf)\(([A-Za-z0-9_-]*),([A-Za-z0-9:\\$\{\}_-]*),([A-Za-z0-9:\\$\{\}_-]*)([\)\(:])' $AST_CONFIG_DIR/ | sort | uniq | xargs -I{} sh -c 'if ! grep -r --include \*.conf "\[{}\]" $AST_CONFIG_DIR/; then echo "Missing reference:{}"; fi' | grep "Missing reference:" | cut -d: -f2 | xargs -I{} grep -rn --include \*.conf "{}" $AST_CONFIG_DIR/ | sed 's/\s\s*/ /g' | cut -c 15- | grep -v ":;") lines=`echo "$results" | wc -l` chars=`echo "$results" | wc -c` if [ $chars -gt 1 ]; then # this is garbage whitespace if [ "$lines" -ne "0" ]; then echoerr "WARNING: $2 ($lines)" echo "$results" else echo "OK: $2" fi warnings=$(($warnings + $lines)) fi } rule_unref() { printf "Unreachable check: Assuming all dialplan code is in subdirectories of %s...\n" $AST_CONFIG_DIR results=$(pcregrep -ro -hi --include='.*\.conf$' '^\[([A-Za-z0-9-])+?\]' $(ls -d $AST_CONFIG_DIR/*/) | cut -d "[" -f2 | cut -d "]" -f1 | xargs -I{} sh -c 'if ! grep -rE --include \*.conf "([ @?,:^\(=]){}" $AST_CONFIG_DIR/; then echo "Unreachable Code:{}"; fi' | grep "Unreachable Code:" | grep -vE "\-([0-9]+)$" | cut -d: -f2 | xargs -I{} grep -rn --include \*.conf "{}" $(ls -d $AST_CONFIG_DIR/*/) | sed 's/\s\s*/ /g' | cut -c 15- | grep -v ":;") lines=`echo "$results" | wc -l` chars=`echo "$results" | wc -c` if [ $chars -gt 1 ]; then # this is garbage whitespace if [ "$lines" -ne "0" ]; then echoerr "WARNING: $2 ($lines)" echo "$results" else echo "OK: $2" fi warnings=$(($warnings + $lines)) fi } rule_warning() { # $1 = rule, $2 = rule name results=$(grep -rnE --include \*.conf "$1" $AST_CONFIG_DIR | sed 's/\s\s*/ /g' | cut -c 15-) lines=`echo "$results" | wc -l` chars=`echo "$results" | wc -c` if [ $chars -gt 1 ]; then # this is garbage whitespace if [ "$lines" -ne "0" ]; then echoerr "WARNING: $2 ($lines)" echo "$results" else echo "OK: $2" fi warnings=$(($warnings + $lines)) fi } rule_error() { # $1 = rule, $2 = rule name results=$(grep -rnE --include \*.conf "$1" $AST_CONFIG_DIR | sed 's/\s\s*/ /g' | cut -c 15-) lines=`echo "$results" | wc -l` chars=`echo "$results" | wc -c` if [ $chars -gt 1 ]; then # this is garbage whitespace if [ "$lines" -ne "0" ]; then echoerr "ERROR: $2 ($lines)" echo "$results" else echo "OK: $2" fi errors=$(($errors + $lines)) fi } run_rules() { warnings=0 errors=0 printf "%s\n" "Processing rules..." # Warnings rule_warning '"\${(.*?)}"=""' 'Null check using expression' rule_warning '"\${(.*?)}"!=""' 'Existence check using expression' rule_warning '\$\[\${ISNULL\(([^&|]*?)\)}\]' 'Unnecessary expression surrounding ISNULL' rule_warning '\$\[\${EXISTS\(([^&|]*?)\)}\]' 'Unnecessary expression surrounding EXISTS' rule_warning '\$\[\${[A-Z]+\(([^&|=><+*/-]*?)\)}\]' 'Unnecessary expression surrounding function' rule_warning '\${SHELL\(curl "(.*?)"\)}' 'SHELL replacable with CURL' rule_warning 'ExecIf\(\$\[(.*?)\]\?Return\((.*?)\):Return\((.*?)\)\)' 'ExecIf with Return for both branches replacable with Return IF' rule_warning 'ExecIf\(\$\[(.*?)\]\?Return\((.*?)\)\)' 'ExecIf expression with Return for one branch replacable with ReturnIf' rule_warning 'ExecIf\(\$\{(.*?)\}\?Return\((.*?)\)\)' 'ExecIf function with Return for one branch replacable with ReturnIf' rule_warning 'ExecIf\(\$\[(.*?)\]\?Return\)' 'ExecIf function with Return replacable with ReturnIf' rule_warning 'ExecIf\(\$\{(.*?)\}\?Return\)' 'ExecIf function with Return replacable with ReturnIf' rule_warning 'Return\(\${IF\((.*?)\?1:0\)\}\)' 'IF inside RETURN is superfluous' rule_warning '\(\$\[([A-Z])+\(' 'Expression syntax but found function?' rule_warning '\w*(? ([*#\[\]a-zA-z0-9]*?),[^1]' 'Extension has no priority' rule_error ' n\((.*?)\),n,' 'Duplicate next for priority' rule_error 'same [^n]' 'Same, but no next priority label' rule_error 'If\(\$\{(.*?)&(.*?)\}\?' 'Multiple functions without enclosing expression' # check for multiple functions without enclosing expression rule_error ' (.*?),([1n]),(.*?)\(([^\)]*) ;' 'Unterminated application call, followed by comment' # Asterisk will catch *this* error rule_error 'Gosub\(([-a-z0-9,]*)\(([-a-zA-Z0-9\$\{\},]*)\)([^\)])' 'Unterminated Gosub', rule_error 'Return\(([-a-zA-Z0-9\$\{\}\(\),]*)\}( *?);' 'Unterminated Return' rule_error 'exten \[' 'Extension pattern without leading underscore' rule_error 'exten ([A-Za-z0-9\[]+)?(]).,' 'Extension pattern without leading underscore' rule_error 'exten ([A-Za-z0-9\[]+)?(])!,' 'Extension pattern without leading underscore' rule_error '\w*(?> /etc/modules # load module at startup for USB fi if [ -d $AST_SOURCE_PARENT_DIR/app_rpt ]; then cd $AST_SOURCE_PARENT_DIR/app_rpt git pull else cd $AST_SOURCE_PARENT_DIR git clone --depth 1 https://github.com/AllStarLink/app_rpt.git fi cd $AST_SOURCE_PARENT_DIR/$AST_SRC_DIR # Patch in the radio modules git apply $AST_SOURCE_PARENT_DIR/app_rpt/apps/Makefile.diff git apply $AST_SOURCE_PARENT_DIR/app_rpt/channels/Makefile.diff git apply $AST_SOURCE_PARENT_DIR/app_rpt/res/Makefile.diff git apply $AST_SOURCE_PARENT_DIR/app_rpt/utils/Makefile.diff mkdir apps/app_rpt mkdir channels/xpmr cp $AST_SOURCE_PARENT_DIR/app_rpt/apps/*.c apps cp $AST_SOURCE_PARENT_DIR/app_rpt/apps/app_rpt/* apps/app_rpt cp $AST_SOURCE_PARENT_DIR/app_rpt/channels/*.c $AST_SOURCE_PARENT_DIR/app_rpt/channels/*.h channels cp $AST_SOURCE_PARENT_DIR/app_rpt/channels/xpmr/* channels/xpmr cp $AST_SOURCE_PARENT_DIR/app_rpt/configs/samples/*.conf.sample configs/samples cp $AST_SOURCE_PARENT_DIR/app_rpt/include/asterisk/*.h include/asterisk cp $AST_SOURCE_PARENT_DIR/app_rpt/res/*.c $AST_SOURCE_PARENT_DIR/app_rpt/res/*.in res cp $AST_SOURCE_PARENT_DIR/app_rpt/utils/*.c utils fi if [ "$ALSA" = "1" ]; then # chan_alsa was removed in Asterisk 21, and with it, the support for ALSA lib detection in the build system. Add it back if needed. lines=$(grep "HAVE_ALSA" include/asterisk/autoconfig.h.in | wc -l) if [ $lines -eq 0 ]; then printf "Patching build system to detect ALSA library\n" git_patch "alsa.diff" ./bootstrap.sh # Regenerate configure and include/asterisk/autoconfig.h.in fi fi if [ "$SIP_CISCO" = "1" ]; then # ASTERISK-13145 (https://issues.asterisk.org/jira/browse/ASTERISK-13145) if [ ! -f channels/chan_sip.c ]; then die "chan_sip is not present in this source, please add the --sip option" fi # https://usecallmanager.nz/patching-asterisk.html and https://github.com/usecallmanagernz/patches download_github_file "usecallmanagernz/patches" "master" "asterisk/$CISCO_CM_SIP.patch" "/tmp/$CISCO_CM_SIP.patch" patch --strip=1 < /tmp/$CISCO_CM_SIP.patch if [ $? -ne 0 ]; then echoerr "WARNING: Call Manager patch may have failed to apply correctly" fi rm /tmp/$CISCO_CM_SIP.patch CFLAGS="-DENABLE_SRTP_AES_GCM -DENABLE_SRTP_AES_256" ./configure fi # XXX run this manually and trust the cert since the SVN server seems to have cert validation issues occasionally # Do this BEFORE running the script so that the script will see the files present and just patch and exit. svn --non-interactive --trust-server-cert export https://svn.digium.com/svn/thirdparty/mp3/trunk addons/mp3 ./contrib/scripts/get_mp3_source.sh universal_patches if [ "$EXTRA_FEATURES" = "1" ]; then # Add PhreakNet patches printf "%s\n" "Beginning custom patches..." phreak_patches # custom patches printf "%s\n" "Custom patching completed..." else echoerr "Skipping feature patches..." fi if [ "$OS_DIST_INFO" = "FreeBSD" ]; then freebsd_port_patches fi if [ "$PAC_MAN" = "apk" ]; then # Use GitLab mirror instead of Alpine Linux for reliability custom_fuzzy_patch "10-musl-mutex-init.patch" "https://gitlab.alpinelinux.org/alpine/aports/-/raw/master/main/asterisk/10-musl-mutex-init.patch" custom_fuzzy_patch "20-musl-astmm-fix.patch" "https://gitlab.alpinelinux.org/alpine/aports/-/raw/master/main/asterisk/20-musl-astmm-fix.patch" custom_fuzzy_patch "40-asterisk-cdefs.patch" "https://gitlab.alpinelinux.org/alpine/aports/-/raw/master/main/asterisk/40-asterisk-cdefs.patch" custom_fuzzy_patch "41-asterisk-ALLPERMS.patch" "https://gitlab.alpinelinux.org/alpine/aports/-/raw/master/main/asterisk/41-asterisk-ALLPERMS.patch" fi } # Minimum argument check if [ $# -lt $MIN_ARGS ]; then cmd="help" else cmd="$1" fi FLAG_TEST=0 PARSED_ARGUMENTS=$(getopt -n phreaknet -o bc:u:dfhostu:v:w -l backtraces,cc:,dahdi,force,flag-test,help,sip,testsuite,user:,version:,weaktls,alsa,cisco,rpt,sccp,overlay:,clli:,debug:,devmode,disa:,drivers,disable-vpmadt032,experimental,extcodecs,g72x,fast,freepbx,generic,autokvers,lightweight,api-key:,rotate,audit,boilerplate,upstream:,manselect,minimal,vanilla,wanpipe,openr2,offline,noupdate -- "$@") VALID_ARGUMENTS=$? if [ "$VALID_ARGUMENTS" != "0" ]; then usage exit 2 fi if [ "$OS_DIST_INFO" != "FreeBSD" ]; then eval set -- "$PARSED_ARGUMENTS" else shift # for FreeBSD fi while true; do if [ "$1" = "" ]; then break # for FreeBSD fi case "$1" in -b | --backtraces ) ENABLE_BACKTRACES=1; shift ;; -c | --cc ) AST_CC=$2; shift 2;; -d | --dahdi ) CHAN_DAHDI=1; shift ;; -f | --force ) FORCE_INSTALL=1; IGNORE_FAILURES=1; shift ;; -h | --help ) cmd="help"; shift ;; -n | --no-rc ) PREFER_RELEASE_CANDIDATES=0; shift ;; -o | --flag-test ) FLAG_TEST=1; shift;; -s | --sip ) CHAN_SIP=1; shift ;; -t | --testsuite ) TEST_SUITE=1; DEVMODE=1; shift ;; -u | --user ) AST_USER=$2; shift 2;; -v | --version ) AST_ALT_VER=$2; shift 2;; -w | --weaktls ) WEAK_TLS=1; shift ;; --alsa ) ALSA=1; shift ;; --audit ) PKG_AUDIT=1; shift ;; --cisco ) SIP_CISCO=1; shift ;; --rpt ) RPT_MODULES=1; shift ;; --sccp ) CHAN_SCCP=1; shift ;; --overlay ) OVERLAY_DIR=$2; shift 2;; --boilerplate ) BOILERPLATE_SOUNDS=1; shift ;; --clli ) PHREAKNET_CLLI=$2; shift 2;; --disa ) PHREAKNET_DISA=$2; shift 2;; --debug ) DEBUG_LEVEL=$2; shift 2;; --devmode ) DEVMODE=1; shift ;; --drivers ) DAHDI_OLD_DRIVERS=1; shift ;; --disable-vpmadt032 ) DAHDI_DISABLE_VPMADT032=1; shift ;; --experimental ) EXPERIMENTAL_FEATURES=1; shift ;; --extcodecs ) EXTERNAL_CODECS=1; shift ;; --fast ) FAST_COMPILE=1; shift ;; --freepbx ) FREEPBX_GUI=1; shift ;; --g72x ) G72X_CODECS=1; shift ;; --generic ) GENERIC_HEADERS=1; shift ;; --autokvers ) AUTOSET_KVERS=1; shift ;; --lightweight ) LIGHTWEIGHT=1; shift ;; --api-key ) INTERLINKED_APIKEY=$2; shift 2;; --rotate ) ASTKEYGEN=1; shift ;; --upstream ) SCRIPT_UPSTREAM=$2; shift 2;; --manselect ) MANUAL_MENUSELECT=1; shift ;; --minimal ) ENHANCED_INSTALL=0; shift ;; --vanilla ) EXTRA_FEATURES=0; shift ;; --wanpipe ) DAHDI_WANPIPE=1; shift ;; --openr2 ) OPENR2=1; shift ;; --offline ) OFFLINE_INSTALL=1; shift ;; --noupdate ) PACMAN_NOUPDATE=1; shift ;; # -- means the end of the arguments; drop this, and break out of the while loop --) shift; break ;; # If invalid options were passed, then getopt should have reported an error, # which we checked as VALID_ARGUMENTS when getopt was called... *) die "Unexpected option: $1" #cmd="help"; shift; break ;; esac done if [ "$OFFLINE_INSTALL" = "1" ]; then if [ ! -d $OFFLINE_DIR ]; then die "Offline install source $OFFLINE_DIR does not exist - run 'phreaknet offline' on an Internet-connected system and copy the output directory to this system" fi fi if [ "$FAST_COMPILE" = "1" ]; then AST_MAKE="nice -15 $AST_MAKE" # -15 to speed up compilation by increasing CPU priority. fi if [ "$FLAG_TEST" = "1" ]; then echog "Flag test successful." exit 0 fi if [ -z "${AST_CC##*[!0-9]*}" ]; then # POSIX compliant: https://unix.stackexchange.com/a/574169/ echoerr "Country code must be an integer." exit 1 fi if which curl > /dev/null && [ "$OFFLINE_INSTALL" != "1" ]; then # only execute if we have curl self=`grep "# v" $FILE_PATH | head -1 | cut -d'v' -f2` # Only download the first few lines of the file, to get the latest version number, and only check every so often if [ -f /tmp/phreaknet_upstream_version.txt ]; then recent=$( find /tmp/phreaknet_upstream_version.txt -mmin -720 2>/dev/null | wc -l ) else recent=$( find /tmp/phreaknet_no_update_check.txt -mmin -720 2>/dev/null | wc -l ) if [ "$recent" = "0" ]; then # Check if we have Internet connectivity. If not (or if it's not a fast connection), don't bother trying to update right now. ping -c 1 -W 3 1.1.1.1 > /dev/null if [ $? -ne 0 ]; then printf " *** Skipping update check (no Internet connectivity detected)\n" echo "1" > /tmp/phreaknet_no_update_check.txt recent=1 fi fi fi if [ "$recent" != "1" ]; then printf " *** Checking if a higher numbered version is available..." $CURL -o "/tmp/phreaknet_upstream_version.txt" -H "Accept: application/vnd.github.v3.raw" "https://api.github.com/repos/InterLinked1/phreakscript/contents/phreaknet.sh" -r 0-210 # Compare current version with latest upstream version upstream=`grep -m1 "# v" /tmp/phreaknet_upstream_version.txt | cut -d'v' -f2` if [ -f /tmp/phreaknet_upstream_version.txt ]; then touch /tmp/phreaknet_upstream_version.txt # if curl doesn't reset the timestamp, do it ourselves fi if [ "$self" != "$upstream" ] && [ "$cmd" != "update" ]; then # Pull from GitHub here for version check for a) speed and b) stability reasons # In this case, it's possible that our version number could actually be ahead of master, since we update from the dev upstream. We need to compare the versions, not merely check if they differ. # Don't throw a warning if only the development tip is ahead of the master branch. But if master is ahead of us, then warn. morerecent=`printf "%s\n%s" "$self" "$upstream" | sort | tail -1` if [ "${morerecent}" != "${self}" ]; then printf " YES\n" echoerr "WARNING: PhreakScript is out of date (most recent stable version is $upstream) - run 'phreaknet update' to update" sleep 0.5 else printf " NO (AHEAD)\n" fi else printf " NO\n" fi fi fi dialog_result() { if [ "$1" = "$2" ]; then wizardresult="$wizardresult $3" fi } require_installed_asterisk() { if [ ! -d $AST_VARLIB_DIR ]; then die "$AST_VARLIB_DIR does not exist; please install Asterisk before running this commands" fi if [ ! -d $AST_SOUNDS_DIR ]; then die "$AST_SOUNDS_DIR does not exist; please install Asterisk before running this commands" fi } apply_overlay_sub() { subdir="$1" for fullfiledir in $OVERLAY_DIR/$subdir/*; do filedir=$( basename "$fullfiledir" ) if [ -d "$fullfiledir" ]; then # It's a directory. Copy the whole thing over. printf " -- Copying directory $fullfiledir -> $subdir\n" cp -r "$fullfiledir" "$subdir" elif [ -f "$fullfiledir" ]; then # It's a file. Copy the file over, unless it's named Makefile.diff, in which case we just apply it. if [ "$filedir" = "Makefile.diff" ]; then printf " -- Applying patch $fullfiledir -> $subdir/Makefile\n" patch -u -b "$subdir/Makefile" -i "$fullfiledir" else printf " -- Copying file $fullfiledir -> $subdir\n" cp "$fullfiledir" "$subdir" fi else die "Error: $filedir" fi if [ $? -ne 0 ]; then exit 1 fi done } apply_overlays() { if [ "$OVERLAY_DIR" != "" ]; then if [ ! -d "$OVERLAY_DIR" ]; then die "Overlay directory $OVERLAY_DIR does not exist" fi for subdir in $OVERLAY_DIR/*; do printf "Applying overlay of $subdir\n" subdirbase=$( basename "$subdir" ) apply_overlay_sub "$subdirbase" done fi } if [ "$cmd" = "help" ]; then usage exit 2 elif [ "$cmd" = "wizard" ]; then wizardresult="" ensure_installed "dialog" # DAHDI ans=$(dialog --nocancel --menu "Do you need support for traditional telephony equipment? (DAHDI)" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--dahdi" if [ "$ans" = "y" ]; then ans=$(dialog --nocancel --default-item 'n' --menu "Do you need drivers for any of the following cards?\nWCTDM800, WCAEX800, WCTDM410, WXAEX410, WXTE120XP, WCTE11XP, WCTDM, WCT1XXP, WCFXO" 20 60 12 y Yes n No 2>&1 >/dev/tty) fi dialog_result "$ans" "y" "--drivers" # Channel Drivers ans=$(dialog --nocancel --default-item 'n' --menu "Do you require ALSA library support?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--alsa" ans=$(dialog --nocancel --default-item 'n' --menu "Do you need support for the deprecated chan_sip (SIP) module?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--sip" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install the chan_sccp (Skinny) channel driver?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--sccp" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install the usecallmanager chan_sip patches?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--cisco" # General ans=$(dialog --nocancel --default-item 'n' --menu "Do you need support for TLS 1.0?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--weaktls" ans=$(dialog --nocancel --menu "Do you wish to overwrite/upgrade an existing Asterisk install?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--force" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install the FreePBX GUI? (not recommended)" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--freepbx" # "Advanced" options ans=$(dialog --nocancel --menu "Do you want to to configure additional advanced options?\n" 20 60 12 y Yes n No 2>&1 >/dev/tty) if [ "$ans" = "y" ]; then ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install Asterisk to run as another user?" 20 60 12 y Yes n No 2>&1 >/dev/tty) if [ "$ans" = "y" ]; then ans=$(dialog --nocancel --inputbox "What user do you want to run Asterisk under?" 20 60 "asterisk" 2>&1 >/dev/tty) wizardresult="$wizardresult --user=$ans" fi ans=$(dialog --nocancel --inputbox "What version of Asterisk do you want to install?\n e.g. latestlts = latest LTS version, master = Git master, 18.12.0 = 18.2.0" 20 60 "latestlts" 2>&1 >/dev/tty) if [ "$ans" != "latestlts" ]; then wizardresult="$wizardresult --version=$ans" fi ans=$(dialog --nocancel --inputbox "Your country code?" 20 60 "1" 2>&1 >/dev/tty) if [ "$ans" != "1" ]; then wizardresult="$wizardresult --cc=$ans" fi ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to enable backtraces for debugging?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--backtraces" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install in development mode?\nThis will install the test framework and test suite, and compile with certain development compilation options." 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--testsuite" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to manually run menuselect?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--manselect" ans=$(dialog --nocancel --default-item 'n' --menu "Do you or will you require support for external codecs?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--extcodecs" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install only generic Asterisk, without any PhreakNet enhancements?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--vanilla" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install only basic modules (may significantly degrade functionality)?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "n" "--lightweight" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to install experimental features that may not be production ready?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "n" "--experimental" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to prevent installation of nonrequired dependencies?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--minimal" ans=$(dialog --nocancel --default-item 'n' --menu "Do you want to audit package installation?" 20 60 12 y Yes n No 2>&1 >/dev/tty) dialog_result "$ans" "y" "--audit" fi ans=$(dialog --nocancel --default-item 'n' --menu "Last question! Do you want to begin installation automatically?" 20 60 12 y Yes n No 2>&1 >/dev/tty) printf "\n\n" echog "You have completed the installation command wizard. You may use the following command to install according to your preferences:" printf "phreaknet install %s\n" "$wizardresult" if [ "$ans" = "y" ]; then if which phreaknet > /dev/null; then printf "Automatically installing with the determined options...\n" sleep 1 exec phreaknet install "$wizardresult" else echoerr "Could not find PhreakScript in PATH. Please ensure this is run as root, and manually run the above command." fi fi elif [ "$cmd" = "make" ]; then # chmod +x phreaknet.sh # ./phreaknet.sh make # phreaknet install assert_root if [ "$FILE_PATH" = "/usr/local/sbin/phreaknet" ]; then die "PhreakScript is already installed, to reinstall, execute 'make' using the new script, e.g. ./phreaknet.sh make" fi if [ ! -d /usr/local/sbin ]; then # Doesn't exist out of the box on Alpine Linux mkdir /usr/local/sbin fi ln -nsf $FILE_PATH /usr/local/sbin/phreaknet if [ $? -eq 0 ]; then echo "PhreakScript added to path." else echoerr "PhreakScript could not be added to path. Is it already there?" echoerr "If it's not, move the source file (phreaknet.sh) to /usr/local/src and try again" fi elif [ "$cmd" = "man" ]; then cd /tmp download_github_file "InterLinked1/phreakscript" "master" "phreaknet.1.md" ensure_installed pandoc # f option required for double dash to work correctly: https://github.com/jgm/pandoc/issues/5404 pandoc phreaknet.1.md -f markdown-smart -s -t man -o phreaknet.1 if [ ! -d /usr/local/man/man1 ]; then mkdir /usr/local/man/man1 fi cp phreaknet.1 /usr/local/man/man1 gzip /usr/local/man/man1/phreaknet.1 mandb elif [ "$cmd" = "mancached" ]; then cd /tmp download_github_file "InterLinked1/phreakscript" "master" "phreaknet.1" if [ ! -d /usr/local/man/man1 ]; then mkdir /usr/local/man/man1 fi cp phreaknet.1 /usr/local/man/man1 gzip /usr/local/man/man1/phreaknet.1 mandb elif [ "$cmd" = "source" ]; then if [ $(id -u) -ne 0 ]; then # check for source prereqs: git and svn { git --version >/dev/null && svn help >/dev/null; } || { die "Please install git and subversion packages and try again."; } else # we are already root, so just install prereqs install_prereq 1 fi AST_SOURCE_PARENT_DIR=$PWD get_ast_source elif [ "$cmd" = "experimental" ]; then assert_root cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` if [ $AST_MAJOR_VER -ge 21 ]; then printf "Installing 21+ patches for experimental features\n" add_experimental $AST_MAKE else echoerr "Your version of Asterisk is not eligible for experimental features" fi elif [ "$cmd" = "g72x" ]; then assert_root cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` printf "Installing G.72x support\n" if [ ! -d /usr/include/asterisk ]; then cd $AST_SRC_DIR $AST_MAKE install-headers cd .. fi build_g72x $AST_MAKE elif [ "$cmd" = "offline" ]; then OFFLINE_PREP=1 AST_SOURCE_PARENT_DIR=$OFFLINE_DIR if [ -d $AST_SOURCE_PARENT_DIR ]; then if [ "$FORCE_INSTALL" = "1" ]; then echoerr "Purging $AST_SOURCE_PARENT_DIR and preparing new offline install source" rm -rf $AST_SOURCE_PARENT_DIR else die "$AST_SOURCE_PARENT_DIR already exists, specify --force to recreate offline install" fi fi mkdir $AST_SOURCE_PARENT_DIR cd $AST_SOURCE_PARENT_DIR instantiate_repo # We rename all the tarballs to somethin generic, so that even if versions are different between the versions of PhreakScript # installed on the source and target systems, it will still work. get_dahlin_source # end up with a dahlin-offline directory get_dahtool_source # end up with a dahtool-offline directory cd $AST_SOURCE_PARENT_DIR $WGET http://downloads.asterisk.org/pub/telephony/libpri/releases/${LIBPRI_SOURCE_NAME}.tar.gz && mv ${LIBPRI_SOURCE_NAME}.tar.gz libpri.tar.gz $WGET https://github.com/asterisk/libss7/archive/refs/tags/${LIBSS7_VERSION}.tar.gz && mv ${LIBSS7_VERSION}.tar.gz libss7.tar.gz $WGET https://ftp.sangoma.com/linux/current_wanpipe/${WANPIPE_SOURCE_NAME}.tgz && mv ${WANPIPE_SOURCE_NAME}.tgz wanpipe.tgz if [ "$G72X_CODECS" = "1" ]; then git clone --depth 1 https://github.com/BelledonneCommunications/bcg729.git git clone --depth 1 https://github.com/arkadijs/asterisk-g72x.git fi get_ast_source # end up with an asterisk-offline directory if [ "$CHAN_SCCP" = "1" ]; then get_sccp_source fi if [ "$OPENR2" = "1" ]; then get_openr2_source fi echog "Offline installation source prepared in $AST_SOURCE_PARENT_DIR - copy this directory to target system for offline installation" ls $AST_SOURCE_PARENT_DIR elif [ "$cmd" = "install" ]; then preinstall_warn=0 if [ "$RTPULSING" != "1" ]; then echoerr "Real time pulsing is not compatible or has been disabled for this build." sleep 1 fi if [ "$HAVE_COMPATIBLE_SPANDSP" != "1" ]; then echoerr "SpanDSP is not compatible or has been disabled for this build." sleep 1 fi if [ ${#AST_USER} -eq 0 ]; then echoerr "WARNING: You are installing Asterisk to run as root. This is not recommended." echoerr "Specify -u or --user to specify a run user" printf "\n" preinstall_warn=1 fi if [ "$LIGHTWEIGHT" = "1" ]; then echoerr "WARNING: You have specified --lightweight, which will disable most modules from building." echoerr "This may result in a system that is not suitable for production usage." printf "\n" preinstall_warn=1 fi if [ "$EXTERNAL_CODECS" = "1" ] && [ "$AST_ALT_VER" = "git" ]; then echoerr "WARNING: External codecs should not be installed with the master branch." echoerr "This may cause ABI (Application Binary Interface) issues, including crashes." printf "\n" preinstall_warn=1 fi if [ "$preinstall_warn" = "1" ]; then sleep 2 fi if [ "$PKG_AUDIT" = "1" ]; then if [ "$PAC_MAN" = "apt-get" ]; then pkg_before=$( apt list --installed ) else echoerr "Distro not supported for package audit" fi fi # Install Pre-Reqs printf "%s %d\n" "Starting installation with country code" $AST_CC quell_mysql # It is assumed if OFFLINE_INSTALL is set, that the system package manager is using local sources (e.g. disc) as opposed to installing from the network install_prereq 1 # This must be done before any other packages are installed since we'll skip package install checks if package manager was used recently. if [ "$DEVMODE" = "1" ]; then # Install the Linux headers if we can, but don't abort if we can't. if [ "$PAC_MAN" = "apt-get" ]; then apt-get install -y linux-headers-`uname -r` if [ $? -ne 0 ]; then # we're not installing DAHDI, but warn about this so we know we can't. echoerr "DAHDI is potentially incompatible with this system (missing kernel build headers)" linux_headers_info fi fi fi assert_root if [ "$FREEPBX_GUI" = "1" ]; then install_freepbx_checks fi freediskspace=`df / | awk '{print $4}' | tail -n +2 | tr -d '\n'` # free disk space, in KB if [ ${#freediskspace} -gt 0 ]; then if [ $freediskspace -lt 800000 ]; then # warn users if they're about to install Asterisk with insufficient disk space ( < 800,000 KB) echoerr "WARNING: Free disk space is low: " df --local --type=ext4 -h if [ "$FORCE_INSTALL" = "1" ]; then sleep 3 else exit 1 fi fi fi cd $AST_SOURCE_PARENT_DIR # Get DAHDI if [ "$CHAN_DAHDI" = "1" ]; then if [ ! -d /etc/dahdi ] || [ "$FORCE_INSTALL" = "1" ]; then install_dahdi else echoerr "DAHDI already present but install not forced, skipping..." sleep 2 fi fi cd $AST_SOURCE_PARENT_DIR if [ "$OFFLINE_INSTALL" = "1" ]; then cp -r $OFFLINE_DIR/asterisk-offline . AST_SRC_DIR="asterisk-offline" cd $AST_SRC_DIR else get_ast_source fi # Install Pre-Reqs if [ "$PAC_MAN" = "apt-get" ]; then printf "%s %d" "libvpb1/countrycode string" "$AST_CC" | debconf-set-selections -v fi # install_prereq takes a moment, and produces no output, so make it clear that something is happening printf "Installing prereqs, this may take a moment... " # No newline, so DONE can conclude on the same line ./contrib/scripts/install_prereq install printf "DONE\n" apply_overlays if [ "$PAC_MAN" = "apk" ]; then # No bundled pjproject for Alpine Linux cd /usr/src PJPROJECT_VER="2.15.1" $WGET https://github.com/pjsip/pjproject/archive/refs/tags/$PJPROJECT_VER.tar.gz tar -zxvf $PJPROJECT_VER.tar.gz && rm $PJPROJECT_VER.tar.gz cd pjproject-$PJPROJECT_VER ./configure --prefix=/usr --enable-shared --enable-ext-sound --disable-opencore-amr --disable-pjsua2 CFLAGS="-O2 -DNDEBUG" make dep echo "export LDFLAGS += -lexecinfo" > user.mak # for backtrace using musl make make install ldconfig cd $AST_SOURCE_PARENT_DIR/$AST_SRC_DIR fi # If configure isn't found, run the bootstrap script first to generate it # https://github.com/asterisk/asterisk/pull/1696 if [ ! -f ./configure ] || [ ! -f ./menuselect/configure ]; then ./bootstrap.sh fi if [ "$DEVMODE" = "1" ]; then configure_devmode else ./configure $AST_CONFIGURE_FLAGS fi if [ $? -ne 0 ]; then exit 2 fi cp contrib/scripts/voicemailpwcheck.py /usr/local/bin chmod +x /usr/local/bin/voicemailpwcheck.py # Change Compile Options: https://wiki.asterisk.org/wiki/display/AST/Using+Menuselect+to+Select+Asterisk+Options $AST_MAKE menuselect.makeopts menuselect/menuselect --enable format_mp3 menuselect.makeopts # add mp3 support # Apply menuselects for patches if [ "$EXTRA_FEATURES" = "1" ]; then menuselect/menuselect --enable app_memory --enable res_cliexec menuselect.makeopts # enable modules that are not built by default fi # We want ulaw, not gsm (default) menuselect/menuselect --disable-category MENUSELECT_MOH --disable-category MENUSELECT_CORE_SOUNDS --disable-category MENUSELECT_EXTRA_SOUNDS menuselect.makeopts # Only grab sounds if this is the first time if [ ! -d "$AST_SOUNDS_DIR" ]; then menuselect/menuselect --enable CORE-SOUNDS-EN-ULAW --enable MOH-OPSOUND-ULAW --enable EXTRA-SOUNDS-EN-ULAW menuselect.makeopts # get the ulaw audio files... else echo "Sounds already installed, skipping installation of sound files." fi if [ "$ENABLE_BACKTRACES" = "1" ]; then menuselect/menuselect --enable DONT_OPTIMIZE --enable BETTER_BACKTRACES menuselect.makeopts fi # If $CHAN_DAHDI is 1, then /etc/dahdi should already exist. This will ensure these are enabled if DAHDI already was present and we're not upgrading it now. if [ -d /etc/dahdi ]; then # in reality, this will never fail, even if they can't be enabled... menuselect/menuselect --enable chan_dahdi --enable app_meetme --enable app_flash menuselect.makeopts fi if [ "$CHAN_SIP" = "1" ]; then # somebody still wants chan_sip, okay... menuselect/menuselect --enable chan_sip menuselect.makeopts else if [ $AST_MAJOR_VER -lt 21 ]; then menuselect/menuselect --disable chan_sip menuselect.makeopts fi fi # in 19+, ADSI is not built by default. We should always build and enable it. menuselect/menuselect --enable res_adsi --enable app_adsiprog --enable app_getcpeid menuselect.makeopts if [ $AST_MAJOR_VER -lt 21 ]; then # Disable the built-in skinny and mgcp modules, since there are better alternatives, and they're deprecated as of 19 menuselect/menuselect --disable chan_skinny --disable chan_mgcp menuselect.makeopts # Who's actually using this? menuselect/menuselect --disable app_osplookup menuselect.makeopts fi # Expand TLS support from 1.2 to 1.0 for older ATAs, if needed if [ "$WEAK_TLS" = "1" ]; then sed -i 's/TLSv1.2/TLSv1.0/g' /etc/ssl/openssl.cnf sed -i 's/DEFAULT@SECLEVEL=2/DEFAULT@SECLEVEL=1/g' /etc/ssl/openssl.cnf printf "%s\n" "Successfully patched OpenSSL to allow TLS 1.0..." fi if [ "$LIGHTWEIGHT" = "1" ]; then printf "Disabling most modules from building...\n" # This is less intended for lean production systems than for situations where we may want to recompile Asterisk a very large number of times, # and we can afford to exclude modules to compile as fast as possible. # Start by disabling almost everything. menuselect/menuselect --disable-category MENUSELECT_ADDONS --disable-category MENUSELECT_APPS menuselect.makeopts menuselect/menuselect --disable-category MENUSELECT_CDR --disable-category MENUSELECT_CEL menuselect.makeopts menuselect/menuselect --disable-category MENUSELECT_CHANNELS --disable-category MENUSELECT_CODECS menuselect.makeopts menuselect/menuselect --disable-category MENUSELECT_FORMATS --disable-category MENUSELECT_FUNCS --disable-category MENUSELECT_PBX --disable-category MENUSELECT_RES menuselect.makeopts menuselect/menuselect --disable-category MENUSELECT_TESTS --disable-category MENUSELECT_CFLAGS menuselect.makeopts menuselect/menuselect --disable-category MENUSELECT_UTILS --disable-category MENUSELECT_AGIS menuselect.makeopts # Now explicitly enable things we probably want. # Core menuselect/menuselect --enable app_bridgeaddchan --enable app_channelredirect --enable app_chanspy --enable app_confbridge --enable app_dial --enable app_exec menuselect.makeopts menuselect/menuselect --enable app_flash --enable app_mixmonitor --enable app_originate --enable app_playback --enable app_playtones --enable app_read --enable app_userevent menuselect.makeopts menuselect/menuselect --enable chan_bridge_media --enable chan_dahdi --enable chan_iax2 --enable chan_pjsip menuselect.makeopts menuselect/menuselect --enable codec_a_mu --enable codec_dahdi --enable codec_ulaw menuselect.makeopts menuselect/menuselect --enable format_pcm --enable format_sln --enable format_wav menuselect.makeopts menuselect/menuselect --enable func_callerid --enable func_cdr --enable func_channel --enable func_curl --enable func_cut --enable func_db --enable func_global menuselect.makeopts menuselect/menuselect --enable func_pjsip_aor --enable func_pjsip_contact --enable func_pjsip_endpoint --enable func_shell --enable func_volume menuselect.makeopts menuselect/menuselect --enable pbx_config --enable pbx_spool menuselect.makeopts menuselect/menuselect --enable res_clialiases --enable res_clioriginate --enable res_crypto --enable res_curl --enable res_fax menuselect.makeopts menuselect/menuselect --enable res_pjsip --enable res_pjsip_acl --enable res_pjsip_authenticator_digest --enable res_pjsip_caller_id menuselect.makeopts menuselect/menuselect --enable res_pjsip_dtmf_info --enable res_pjsip_endpoint_identifier_ip --enable res_pjsip_endpoint_identifier_user menuselect.makeopts menuselect/menuselect --enable res_pjsip_header_funcs --enable res_pjsip_logger --enable res_pjsip_notify --enable res_pjsip_outbound_registration menuselect.makeopts menuselect/menuselect --enable res_pjsip_pubsub --enable res_pjsip_session --enable res_rtp_asterisk menuselect.makeopts menuselect/menuselect --enable res_sorcery_astdb --enable res_sorcery_config --enable res_sorcery_memory --enable res_sorcery_memory_cache menuselect.makeopts menuselect/menuselect --enable res_srtp --enable res_timing_timerfd menuselect.makeopts menuselect/menuselect --enable res_geolocation --enable res_statsd menuselect.makeopts # required for res_pjsip to load # Extended menuselect/menuselect --enable app_stack --enable app_if menuselect.makeopts menuselect/menuselect --enable func_frame_trace menuselect.makeopts menuselect/menuselect --enable res_cliexec menuselect.makeopts # "Deprecated" menuselect/menuselect --enable app_adsiprog --enable app_getcpeid menuselect.makeopts menuselect/menuselect --enable res_adsi menuselect.makeopts else # Disable non pbx_config config modules to avoid dialplan conflict issues. menuselect/menuselect --disable pbx_ael --disable pbx_lua menuselect.makeopts fi if [ "$MANUAL_MENUSELECT" = "1" ]; then $AST_MAKE menuselect # allow user to run menuselect manually if requested. This will block until user finishes. fi # Compile Asterisk if [ "$AST_MAKE" = "gmake" ]; then # jansson fails to compile nicely on its own with gmake cd third-party/jansson gmake cd ../.. fi if [ "$OS_DIST_INFO" = "FreeBSD" ]; then # For some reason, %%LIBSYSINFO%% is in the linking flags on FreeBSD, remove that from being added. libsysinfo is needed though. # Same with HAVE_CRYPT_R, that's not available but gets detected, so undetect it # Note that these sed expressions are designed for BSD sed, and do not work with GNU sed sed -i '' '/LIBSYSINFO/d' main/Makefile sed -i '' '/HAVE_CRYPT_R/d' include/asterisk/autoconfig.h sed -i "" -e 's|WRAP_LIBC_MALLOC|ASTMM_LIBC ASTMM_REDIRECT|g' addons/mp3/interface.c # for format_mp3 sed -i "" -e 's|\\s|s|g' build_tools/make_xml_documentation # fix sed command in this script to remove the backslash for BSD sed $AST_MAKE "ASTLDFLAGS=-lcrypt -lsysinfo" main fi if [ "$PAC_MAN" = "apk" ]; then $AST_MAKE -j$(nproc) ASTCFLAGS="-w" utils # for astdb2sqlite3.c, #warning usage of non-standard #include is deprecated [-Werror=cpp] $AST_MAKE -j$(nproc) ASTCFLAGS="-w" addons # for format_mp3, error: #warning redirecting incorrect #include to [-Werror=cpp] $AST_MAKE -j$(nproc) ASTCFLAGS="-w" main # for ast_expr2.c, #warning usage of non-standard #include is deprecated [-Werror=cpp] fi # Compile Asterisk. This is the longest step, if you are installing for the first time. if [ $? -eq 0 ]; then $AST_MAKE -j$(nproc) main # compile 'main' subdirectory first fi if [ $? -eq 0 ]; then $AST_MAKE -j$(nproc) fi if [ $? -ne 0 ]; then gcc -v $AST_MAKE # Finish compiling antyhing that would build successfully, from the parallel build, so the noisy build only builds the offending target $AST_MAKE NOISY_BUILD=1 # show actual compilation command that failed, with no parallelism if [ "$DEVMODE" = "1" ] && [ -f doc/core-en_US.xml ]; then # run just make validate-docs for doc validation $XMLSTARLET val -d doc/appdocsxml.dtd -e doc/core-en_US.xml # by default, it doesn't tell you whether the docs failed to validate. So if validation failed, print that out. fi die "Compilation or doc validation failed" fi if [ "$DEVMODE" = "1" ]; then $AST_MAKE full # some XML syntax warnings aren't shown unless make full is run fi if [ $? -ne 0 ]; then if [ "$DEVMODE" = "1" ] && [ -f doc/core-en_US.xml ]; then $XMLSTARLET val -d doc/appdocsxml.dtd -e doc/core-en_US.xml # by default, it doesn't tell you whether the docs failed to validate. So if validation failed, print that out. fi die "Compilation or doc validation failed" fi if [ "$DEVMODE" = "1" ] || [ "$G72X_CODECS" = "1" ]; then $AST_MAKE install-headers # install development headers fi if [ "$G72X_CODECS" = "1" ]; then build_g72x fi # Install Asterisk if [ -d /usr/lib/asterisk/modules ]; then rm -f /usr/lib/asterisk/modules/*.so elif [ -d /usr/local/lib/asterisk/modules ]; then rm -f /usr/local/lib/asterisk/modules/*.so fi $AST_MAKE install # actually install modules and binary if [ "$RPT_MODULES" = "1" ]; then # Also install the radio sounds if [ ! -d $AST_SOUNDS_DIR/rpt ]; then printf "RPT sounds don't exist yet, adding them now...\n" mkdir $AST_SOUNDS_DIR/rpt cd $AST_SOUNDS_DIR/rpt $WGET "http://downloads.allstarlink.org/asterisk-asl-sounds-en-ulaw.tar.gz" # Sounds are extracted directly into the dir tar -xvzf asterisk-asl-sounds-en-ulaw.tar.gz rm asterisk-asl-sounds-en-ulaw.tar.gz fi fi # Debugging: see where Asterisk got installed which asterisk which rasterisk if [ ! -f /usr/sbin/asterisk ] && [ ! -f /sbin/asterisk ] && [ ! -f /usr/local/sbin/asterisk ]; then echoerr "Could not find asterisk in either /usr/sbin or /sbin or /usr/local/sbin?" ls -la /usr/sbin/asterisk ls -la /sbin/asterisk ls -la /usr/local/sbin/asterisk exit 1 fi # chan_sccp builds out of tree, so do it at the end if [ "$CHAN_SCCP" = "1" ]; then if [ "$OFFLINE_INSTALL" = "1" ]; then cd $AST_SOURCE_PARENT_DIR cp -r $OFFLINE_DIR/chan-sccp . else get_sccp_source fi build_sccp fi install_samples if [ "$OS_DIST_INFO" = "FreeBSD" ]; then for FILE in $(find /usr/local/lib/asterisk/modules -name "*.so" ) ; do nm -D ${FILE} | grep PJ_AF_INET done fi $AST_MAKE config # install init script (to run Asterisk as a service) ldconfig # update shared libraries cache if [ "$OS_DIST_INFO" = "FreeBSD" ]; then $WGET net/asterisk18/files/asterisk.in cp asterisk.in /usr/local/etc/rc.d/asterisk chmod +x /usr/local/etc/rc.d/asterisk fi $AST_MAKE install-logrotate # auto compress and rotate log files if [ "$ODBC" = "1" ]; then # MariaDB ODBC for Asterisk install_odbc fi if [ ${#AST_USER} -gt 0 ]; then id -u "$AST_USER" # Create a user, if needed if [ $? -ne 0 ]; then useradd -c "Asterisk" -s /usr/sbin/nologin -M "$AST_USER" # don't allow any password logins, e.g. su - asterisk. Use passwd asterisk to manually set. fi sed -i "s/ASTARGS=\"\"/ASTARGS=\"-U $AST_USER\"/g" /sbin/safe_asterisk if [ -f /etc/default/asterisk ]; then sed -i "s/#AST_USER=\"asterisk\"/AST_USER=\"$AST_USER\"/g" /etc/default/asterisk sed -i "s/#AST_GROUP=\"asterisk\"/AST_GROUP=\"$AST_USER\"/g" /etc/default/asterisk fi chown -R $AST_USER $AST_CONFIG_DIR/ /usr/lib/asterisk /var/spool/asterisk/ $AST_VARLIB_DIR/ /var/run/asterisk/ /var/log/asterisk /var/cache/asterisk /usr/sbin/asterisk sed -i "s/create 640 root root/create 640 $AST_USER $AST_USER/g" /etc/logrotate.d/asterisk # by default, logrotate will make the files owned by root, so Asterisk can't write to them if it runs as non-root user, so fix this! Not much else that can be done, as it's not a bug, since Asterisk itself doesn't necessarily know what user Asterisk will run as at compile/install time. # by default, it has the asterisk user, so simply uncomment it: sed -i 's/;runuser =/runuser =/' $AST_CONFIG_DIR/asterisk.conf sed -i 's/;rungroup =/rungroup =/' $AST_CONFIG_DIR/asterisk.conf if [ "${AST_USER}" != "asterisk" ]; then # but if we're not actually running as "asterisk", change that: sed -i "s/runuser = asterisk/runuser = $AST_USER/gw tmpuserchanges.txt" $AST_CONFIG_DIR/asterisk.conf if [ ! -s tmpuserchanges.txt ]; then echoerr "runuser option not detected in asterisk.conf" fi sed -i "s/rungroup = asterisk/rungroup = $AST_USER/gw tmpuserchanges.txt" $AST_CONFIG_DIR/asterisk.conf if [ ! -s tmpuserchanges.txt ]; then echoerr "rungroup option not detected in asterisk.conf" fi rm tmpuserchanges.txt fi if [ -f $AST_VARLIB_DIR/astdb.sqlite3 ]; then chgrp $AST_USER $AST_VARLIB_DIR/astdb.sqlite3 fi if [ -d /etc/dahdi ]; then # DAHDI related permissions: https://support.digium.com/s/article/Automatically-setting-dev-dahdi-file-permissions-when-running-Asterisk-as-non-root-user chown -R $AST_USER:$AST_USER /dev/dahdi if [ "${AST_USER}" != "asterisk" ]; then # if we're not actually running as "asterisk" sed -i "s/OWNER=\"asterisk\"/OWNER=\"$AST_USER\"/g" /etc/udev/rules.d/dahdi.rules sed -i "s/GROUP=\"asterisk\"/GROUP=\"$AST_USER\"/g" /etc/udev/rules.d/dahdi.rules fi fi # If we're using Let's Encrypt for our cert, then Asterisk needs to be able to read it. Otherwise, SIP/PJSIP will be very unhappy when they start. if [ -d /etc/letsencrypt/live/ ]; then chmod -R 740 /etc/letsencrypt/live/ chmod -R 740 /etc/letsencrypt/archive/ # Make the relevant letsencrypt folders owned by said group. chgrp -R $AST_USER /etc/letsencrypt/live chgrp -R $AST_USER /etc/letsencrypt/archive fi fi # Allow core dumps ulimit -c unlimited # Make sure we can read any keys we need, or Asterisk will not be happy when it restarts. if [ -d /etc/letsencrypt ]; then make_keys_readable fi # Development Mode (Asterisk Test Suite) if [ "$DEVMODE" = "1" ]; then if [ "$PAC_MAN" = "apt-get" ]; then apt-get install -y gdb # for astcoredumper fi fi if [ "$TEST_SUITE" = "1" ]; then install_testsuite_itself fi if [ "$NO_AUTOSTART" != "1" ]; then if [ -f /etc/init.d/asterisk ]; then /etc/init.d/asterisk status /etc/init.d/asterisk start # service asterisk start /etc/init.d/asterisk status else asterisk -g # Start Asterisk manually if the service isn't installed fi asterisk -V rasterisk -x "core show version" echo $? printf "%s\n" "Asterisk installation has completed. You may now connect to the Asterisk CLI: asterisk -r" printf "%s\n" "If you upgraded Asterisk, you will need to run 'core restart now' for the new version to load." else printf "%s\n" "Asterisk installation has completed." asterisk -V fi if [ "$CHAN_DAHDI" = "1" ]; then echog "Note that DAHDI was installed and requires a reboot (or hotswap of kernel modules, e.g. phreaknet restart) before it can be used." echog "Note that you will need to manually configure /etc/dahdi/system.conf appropriately for your spans." if [ "$PAC_MAN" = "zypper" ]; then echog "Additionally, since you appear to be using openSUSE/SUSE Linux Enterprise, you will need to enable the loading of unsupported kernel modules." echog "See https://support.scc.suse.com/s/kb/Enable-loading-of-unsupported-kernel-modules for details on how to do this." fi fi if [ "$FREEPBX_GUI" = "1" ]; then printf "%s\n" "Installation of FreePBX GUI will begin in 5 seconds..." sleep 5 # give time to read the message above, if we're watching... install_freepbx fi if [ "$PKG_AUDIT" = "1" ]; then if [ "$PAC_MAN" = "apt-get" ]; then pkg_after=$( apt list --installed ) else echoerr "Distro not supported for package audit" fi printf "%s\n" "Package Audit: Before/After" # diff wants a file... printf "%s" "$pkg_before" > /tmp/phreaknet_audit_before.txt printf "%s" "$pkg_after" > /tmp/phreaknet_audit_after.txt diff /tmp/phreaknet_audit_before.txt /tmp/phreaknet_audit_after.txt rm /tmp/phreaknet_audit_before.txt /tmp/phreaknet_audit_after.txt fi elif [ "$cmd" = "freepbx" ]; then install_freepbx_checks if [ "$AST_USER" = "asterisk" ]; then echoerr "Assuming that Asterisk runs as user 'asterisk'..." sleep 2 fi install_freepbx elif [ "$cmd" = "dahdi" ]; then assert_root CHAN_DAHDI=1 # This is used by the pre-req install process to install DAHDI-specific prereqs. install_prereq 0 # Install basic build requirements install_dahdi elif [ "$cmd" = "wanpipe" ]; then assert_root install_wanpipe elif [ "$cmd" = "odbc" ]; then assert_root install_odbc elif [ "$cmd" = "installts" ]; then assert_root install_testsuite "$FORCE_INSTALL" elif [ "$cmd" = "uninstall" ]; then assert_root cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` if [ -f $AST_CONFIG_DIR/freepbx_module_admin.conf ]; then uninstall_freepbx fi cd $AST_SRC_DIR $AST_MAKE uninstall elif [ "$cmd" = "uninstall-all" ]; then assert_root cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` echoerr "WARNING: This will remove all configuration, spool contents, logs, etc." if [ "$FORCE_INSTALL" != "1" ]; then sleep 3 fi if [ -f $AST_CONFIG_DIR/freepbx_module_admin.conf ]; then uninstall_freepbx fi cd $AST_SRC_DIR $AST_MAKE uninstall-all elif [ "$cmd" = "pulsar" ]; then assert_root require_installed_asterisk cd $AST_SOURCE_PARENT_DIR # Certificate has expired (unmaintained) $WGET --no-check-certificate https://octothorpe.info/downloads/pulsar-agi.tar.gz $WGET https://code.phreaknet.org/asterisk/pulsar-noanswer.agi # bug fix to pulsar.agi, to fix broken answer supervision: mv pulsar-agi.tar.gz $AST_VARLIB_DIR cd $AST_VARLIB_DIR tar xvfz pulsar-agi.tar.gz # automatically creates $AST_VARLIB_DIR/sounds/pulsar/ mv $AST_SOURCE_PARENT_DIR/pulsar-noanswer.agi $AST_VARLIB_DIR/agi-bin/pulsar.agi chmod 755 $AST_VARLIB_DIR/agi-bin/pulsar.agi if [ ! -f $AST_VARLIB_DIR/agi-bin/pulsar.agi ]; then echoerr "pulsar.agi is missing" fi rm pulsar-agi.tar.gz elif [ "$cmd" = "sounds" ]; then assert_root require_installed_asterisk printf "%s\n" "Installing Asterisk audio files..." printf "%s\n" "Installing Pat Fleet audio files..." cd /tmp mkdir -p patfleet cd patfleet git clone --depth 1 https://github.com/hharte/PatFleet-asterisk/ cd PatFleet-asterisk/pa mv dictate/* $AST_SOUNDS_DIR/dictate mv digits/* $AST_SOUNDS_DIR/digits mv followme/* $AST_SOUNDS_DIR/followme mv letters/* $AST_SOUNDS_DIR/letters mv phonetic/* $AST_SOUNDS_DIR/phonetic mv silence/* $AST_SOUNDS_DIR/silence mv *.ulaw $AST_SOUNDS_DIR rm -rf /tmp/patfleet if [ "$BOILERPLATE_SOUNDS" = "1" ]; then install_boilerplate_sounds fi elif [ "$cmd" = "boilerplate-sounds" ]; then install_boilerplate_sounds elif [ "$cmd" = "ulaw" ]; then ensure_installed sox if [ ${#2} -gt 0 ]; then # a specific file withoutextension=`printf '%s\n' "$2" | sed -r 's|^(.*?)\.\w+$|\1|'` # see comment on https://stackoverflow.com/a/26753382 sox "$2" --rate 8000 --channels 1 --type ul $withoutextension.ulaw lowpass 3400 highpass 300 else for f in *.wav; do withoutextension=`printf '%s\n' "$f" | sed -r 's|^(.*?)\.\w+$|\1|'` sox $f --rate 8000 --channels 1 --type ul $withoutextension.ulaw lowpass 3400 highpass 300 done fi elif [ "$cmd" = "remsil" ]; then ensure_installed sox # if there is only 1 file, sox -m will fail, ignore. if [ ${#2} -gt 0 ]; then # a specific file f="$2" withoutextension=`printf '%s' "$f" | sed -r 's|^(.*?)\.\w+$|\1|'` withoutextensionplus="${withoutextension}_" sox "$f" "remsil-$withoutextensionplus.wav" silence 1 1.5 0.1% 1 1.5 0.1% : newfile : restart # individual files #echo sox -m remsil-$withoutextensionplus*.wav "remsil-$withoutextensionplus.wav" # combined file #ls remsil-$withoutextensionplus*.wav #sox -m remsil-$withoutextensionplus*.wav "remsil-$withoutextensionplus.wav" # XXX: For some reason, this (and above) doesn't work right, it can/will only merge some of the files, instead of all of them, making this useless sox -m $(for ff in remsil-$withoutextensionplus*.wav; do echo -n "$ff "; done) "remsil-$withoutextensionplus.wav" else for f in *.wav; do withoutextension=`printf '%s' "$f" | sed -r 's|^(.*?)\.\w+$|\1|'` withoutextensionplus="${withoutextension}_" sox "$f" "remsil-$withoutextensionplus.wav" silence 1 1.5 0.1% 1 1.5 0.1% : newfile : restart sox -m remsil-$withoutextensionplus*.wav "remsil-$withoutextensionplus.wav" 2>&1 >/dev/null done fi elif [ "$cmd" = "docverify" ]; then $XMLSTARLET val -d doc/appdocsxml.dtd -e doc/core-en_US.xml # show the XML validation errors $XMLSTARLET val -d doc/appdocsxml.dtd -e doc/core-en_US.xml 2>&1 | grep "doc/core-en_US.xml:" | cut -d':' -f2 | cut -d'.' -f1 | xargs -d "\n" -I{} sed "{}q;d" doc/core-en_US.xml # show the offending lines elif [ "$cmd" = "fullpatch" ]; then cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` if [ $? -ne 0 ]; then die "Asterisk not currently installed?" fi read -r -p "Source File: " filename # ${var:i:j} substring expansion not available in POSIX sh if [ "$(expr substr "$filename" 1 4)" = "app_" ]; then filename="apps/${filename}" elif [ "$(expr substr "$filename" 1 5)" = "func_" ]; then filename="funcs/${filename}" elif [ "$(expr substr "$filename" 1 4)" = "res_" ]; then filename="res/${filename}" fi length=$(expr length "${filename}") clen=$(( $length - 1 )) # 1 not 2, since we're 1-indexed if [ $clen -gt 0 ]; then if [ "$(expr substr "$filename" "$clen" 2)" != ".c" ]; then printf "Auto appending .c file extension\n" filename="${filename}.c" fi fi instantiate_repo cd $AST_SOURCE_PARENT_DIR/$AST_SRC_DIR phreak_tree_module "$filename" $AST_MAKE && $AST_MAKE install elif [ "$cmd" = "runtest" ]; then if [ ${#2} -eq 0 ]; then die "Missing argument." fi run_testsuite_test_only "$2" 0 elif [ "$cmd" = "stresstest" ]; then if [ ${#2} -eq 0 ]; then die "Missing argument." fi run_testsuite_test_only "$2" 1 elif [ "$cmd" = "runtests" ]; then run_testsuite_tests elif [ "$cmd" = "docgen" ]; then echoerr "docgen is deprecated. Please migrate to mkdocs instead." sleep 1 cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd $AST_SRC_DIR if [ $? -ne 0 ]; then die "Couldn't find Asterisk source directory?" fi if [ ! -f doc/core-en_US.xml ]; then die "Failed to find any XML documentation. Has Asterisk been installed yet?" fi $XMLSTARLET val -d doc/appdocsxml.dtd -e doc/core-en_US.xml if [ $? -ne 0 ]; then exit 2 # if the XML docs aren't valid, then give up now fi if [ "$PAC_MAN" = "apt-get" ]; then apt-get install -y php php8.2-xml # XXX TODO: Should determine correct version dynamically fi printf "%s\n" "Obtaining latest version of astdocgen..." download_github_file "InterLinked1/astdocgen" "master" "astdocgen.php" chmod +x astdocgen.php ./astdocgen.php -f doc/core-en_US.xml -x -s > /tmp/astdocgen.xml if [ $? -ne 0 ]; then die "Failed to generate XML dump" fi ./astdocgen.php -f /tmp/astdocgen.xml -h > doc/index.html if [ $? -ne 0 ]; then die "Failed to generate HTML documentation" fi rm /tmp/astdocgen.xml printf "HTML documentation has been generated and is now saved to %s%s\n" "$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR" "doc/index.html" # To remove any packages installed purely for astdocgen: # apt-get remove apache2 apache2-bin apache2-data apache2-utils libapache2-mod-php8.2 libaprutil1-dbd-sqlite3 libaprutil1-ldap liblua5.3-0 php php8.2 php8.2-xml elif [ "$cmd" = "mkdocs" ]; then cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd /tmp if [ -d documentation ]; then cd documentation git stash git pull rm -rf /tmp/documentation/temp/site else git clone --depth 1 https://github.com/asterisk/documentation.git cd documentation fi pip3 install -r requirements.txt # Set up build echo "ASTERISK_XML_FILE := $AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/doc/core-en_US.xml" > Makefile.inc echo "SKIP_ARI := yes" >> Makefile.inc echo "BRANCHES := master" >> Makefile.inc printf "Building documentation... this may take a couple minutes\n" $AST_MAKE BRANCH=master NO_STATIC=yes printf "Documentation has been built to %s\n" "/tmp/documentation/temp/site" elif [ "$cmd" = "pubdocs" ]; then cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` apt-get install -y python-dev python-virtualenv python-lxml pip install pystache pip install premailer if [ -d publish-docs ]; then rm -rf publish-docs fi git clone --depth 1 https://github.com/asterisk/publish-docs.git cd publish-docs echo $AST_SOURCE_PARENT_DIR printf "%s\n" "Generating Confluence markup..." if [ ! -f "$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/doc/core-en_US.xml" ]; then ls -d -v $AST_SOURCE_PARENT_DIR/*/ | grep "asterisk-" | tail -1 ###### not FreeBSD compatible die "File does not exist: $AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/doc/core-en_US.xml" fi ./astxml2wiki.py --username=wikibot --server=https://wiki.asterisk.org/wiki/rpc/xmlrpc '--prefix=Asterisk 18' --space=AST --file=$AST_SOURCE_PARENT_DIR/$AST_SRC_DIR/doc/core-en_US.xml --password=d --debug > confluence.txt printf "%s\n" "Converting Confluence to HTML..." if [ ! -f confluence2html ]; then download_github_file "rmloveland/confluence2html" "master" "confluence2html" fi chmod +x confluence2html PERL_MM_USE_DEFAULT=1 cpan -i CPAN perl -MCPAN -e 'install File::Slurp' ./confluence2html < confluence.txt > docs.html ls -l $AST_SOURCE_PARENT_DIR/publish-docs printf "%s\n" "All Wiki documentation has been generated and is now in $AST_SOURCE_PARENT_DIR/publish-docs/docs.html" printf "%s\n" "phreaknet pubdocs is deprecated. Please migrate to phreaknet mkdocs instead" elif [ "$cmd" = "config" ]; then inject=1 cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd $AST_SRC_DIR if [ $? -ne 0 ]; then die "Asterisk configuration directory does not exist" fi install_samples if [ ${#INTERLINKED_APIKEY} -eq 0 ]; then printf '\a' read -r -p "InterLinked API key: " INTERLINKED_APIKEY fi if [ ${#PHREAKNET_CLLI} -eq 0 ]; then printf '\a' read -r -p "PhreakNet CLLI code: " PHREAKNET_CLLI fi if [ ${#PHREAKNET_DISA} -eq 0 ]; then printf '\a' read -r -p "PhreakNet DISA number: " PHREAKNET_DISA fi if [ ${#INTERLINKED_APIKEY} -lt 30 ]; then echoerr "InterLinked API key must be greater than 30 characters." inject=0 fi if [ ${#PHREAKNET_DISA} -ne 7 ]; then echoerr "PhreakNet DISA number must be 7 digits." inject=0 fi printf "%s: %s\n" "PhreakNet CLLI code" $PHREAKNET_CLLI printf "%s\n" "InterLinked API key seems to be of valid format, not displaying for security reasons..." install_boilerplate if [ "$inject" = "1" ]; then ## Inject user config (CLLI code, API key) sed -i "s/abcdefghijklmnopqrstuvwxyz/$INTERLINKED_APIKEY/g" $AST_CONFIG_DIR/$EXTENSIONS_CONF_FILE sed -i "s/WWWWXXYYZZZ/$PHREAKNET_CLLI/g" $AST_CONFIG_DIR/$EXTENSIONS_CONF_FILE sed -i "s/5551111/$PHREAKNET_DISA/g" $AST_CONFIG_DIR/$EXTENSIONS_CONF_FILE printf "Updated [globals] in %s/extensions.conf with dynamic variables. If globals are stored in a different file, manual updating is required.\n" $AST_CONFIG_DIR ## Also update verify.conf sed -i "s/HSTNTXMOCG0/$PHREAKNET_CLLI/g" $AST_CONFIG_DIR/verify.conf sed -i "s/5551111/$PHREAKNET_DISA/g" $AST_CONFIG_DIR/verify.conf printf "Updated %s/verify.conf\n" $AST_CONFIG_DIR fi printf "%s\n" "Boilerplate config installed! Note that these files may still require manual editing before use." elif [ "$cmd" = "bconfig" ]; then cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd $AST_SRC_DIR if [ $? -ne 0 ]; then die "Asterisk configuration directory does not exist" fi install_samples install_boilerplate elif [ "$cmd" = "keygen" ]; then if [ ${#INTERLINKED_APIKEY} -eq 0 ]; then INTERLINKED_APIKEY=`grep -R "interlinkedkey=" $AST_CONFIG_DIR | grep -v "your-interlinked-api-key" | cut -d'=' -f2 | awk '{print $1;}'` if [ ${#INTERLINKED_APIKEY} -lt 30 ]; then echoerr "Failed to find InterLinked API key. For future use, please set your [globals] variables, e.g. by running phreaknet config" printf '\a' read -r -p "InterLinked API key: " INTERLINKED_APIKEY if [ ${#INTERLINKED_APIKEY} -lt 30 ]; then echoerr "InterLinked API key too short. Not going to attempt uploading the public key..." fi fi fi if [ ${#PHREAKNET_CLLI} -eq 0 ]; then PHREAKNET_CLLI=`grep -R "clli=" $AST_CONFIG_DIR | grep -v "5551111" | grep -v "curl " | grep -v "" | cut -d'=' -f2 | awk '{print $1;}'` if [ ${#PHREAKNET_CLLI} -ne 11 ]; then printf "Failed to find CLLI by grepping configs, querying Asterisk...\n" PHREAKNET_CLLI=`/usr/sbin/rasterisk -x "dialplan show globals" | grep "clli=" | cut -d'=' -f2 | awk '{print $1;}'` fi if [ ${#PHREAKNET_CLLI} -ne 11 ]; then echoerr "Failed to find PhreakNet CLLI. For future use, please set your [globals] variables, e.g. by running phreaknet config" printf '\a' read -r -p "PhreakNet CLLI: " PHREAKNET_CLLI if [ ${#PHREAKNET_CLLI} -ne 11 ]; then echoerr "PhreakNet CLLI must be 11 characters. Not going to attempt uploading the public key..." fi fi fi cd $AST_VARLIB_DIR/keys/ if [ "$ASTKEYGEN" = "1" ]; then if [ -f phreaknetrsa.key ]; then printf "%s\n" "Rotating keys..." else printf "%s\n" "Initializing keys..." fi astgenkey -q -n phreaknetrsa else printf "%s\n" "--rotate flag not provided, skipping key rotation or creation." fi if [ ! -f $AST_VARLIB_DIR/keys/phreaknetrsa.pub ]; then die "File phreaknetrsa.pub not found" fi keylen=`wc -c $AST_VARLIB_DIR/keys/phreaknetrsa.pub | awk '{print $1;}'` if [ "$keylen" = "" ]; then echoerr "File %s not readable?" "$AST_VARLIB_DIR/keys/phreaknetrsa.pub" elif [ $keylen -le 50 ]; then echoerr "Readable key length only %s?" "$keylen" # if file not readable for some reason, probably won't work else printf "Key length: %s\n" "$keylen" fi cat phreaknetrsa.pub if [ ${#INTERLINKED_APIKEY} -gt 30 ] && [ ${#PHREAKNET_CLLI} -eq 11 ]; then wanip=`dig +short myip.opendns.com @resolver4.opendns.com` printf "%s %s\n" "Autodetected WAN IP address is" $wanip wanfqdn=`dig +short -x $wanip` if [ "$wanfqdn" = "" ]; then printf "Could not autodetect FQDN\n" else printf "%s %s\n" "Autodetected WAN FQDN hostname is" "$wanfqdn" fi printf "%s\n" "Attempting to upload RSA public key..." # if curl version is >= 7.76, we could use --fail-with-body and make just one request curl --fail -X POST --data-urlencode "rsakey=$(cat phreaknetrsa.pub)" -d "key=$INTERLINKED_APIKEY" -d "clli=$PHREAKNET_CLLI" https://api.phreaknet.org/v1/rsa if [ $? -ne 0 ]; then echoerr "RSA key upload of $AST_VARLIB_DIR/keys/phreaknetrsa.pub failed." # Repeat, without --fail, for error message: curl -X POST --data-urlencode "rsakey=$(cat phreaknetrsa.pub)" -d "key=$INTERLINKED_APIKEY" -d "clli=$PHREAKNET_CLLI" https://api.phreaknet.org/v1/rsa printf "\n" exit 1 fi printf "\n" else printf "%s\n" "No InterLinked API key and/or CLLI on file, skipping upload of public key..." fi if [ ! -f $AST_CONFIG_DIR/iax-phreaknet-rsa-in.conf ]; then # Instantiate the file with an empty 'inkeys' setting, so that any config modifications of iax.conf will put the keys there instead of in iax.conf echo "inkeys = " > $AST_CONFIG_DIR/iax-phreaknet-rsa-in.conf fi # touch $AST_CONFIG_DIR/iax-phreaknet-rsa-out.conf # no longer necessary for >= 18.9 # Determine what user Asterisk is running as. # cut on ; before = so that we properly handled commented out lines. astrunuser=$( grep "runuser" $AST_CONFIG_DIR/asterisk.conf | cut -d';' -f1 | cut -d'=' -f2 | xargs | tr -d '\n' ) if [ ${#astrunuser} -gt 0 ]; then ## If you are running Asterisk as non-root, make the user as which Asterisk runs own the private key and the new files: chown "$astrunuser" phreaknetrsa.key chown "$astrunuser" phreaknetrsa.pub chown "$astrunuser" $AST_CONFIG_DIR/iax.conf chown "$astrunuser" $AST_CONFIG_DIR/iax-phreaknet* fi asterisk -rx "module reload res_crypto" asterisk -rx "keys init" asterisk -rx "keys show" elif [ "$cmd" = "keyperms" ]; then make_keys_readable elif [ "$cmd" = "fail2ban" ]; then ensure_installed iptables ensure_installed fail2ban if [ -f /etc/fail2ban/filter.d/asterisk.conf ]; then die "Existing fail2ban configuration for Asterisk already found, exiting..." fi download_github_file "fail2ban/fail2ban" "master" "config/filter.d/asterisk.conf" /etc/fail2ban/filter.d/asterisk.conf elif [ "$cmd" = "ban" ]; then if [ ${#2} -lt 1 ]; then die "Must specify an IP address or CIDR range" fi iptables -A INPUT -s $2 -j DROP elif [ "$cmd" = "update" ]; then assert_root if [ ! -f "/tmp/phreakscript_update.sh" ] || [ $(stat -c%s "/tmp/phreakscript_update.sh") -eq 0 ]; then download_github_file "InterLinked1/phreakscript" "master" "phreakscript_update.sh" /tmp/phreakscript_update.sh chmod +x /tmp/phreakscript_update.sh fi printf "%s\n" "Updating PhreakScript..." if [ "$PAC_MAN" = "apt-get" ]; then if [ ! -d /etc/bash_completion.d ]; then apt-get install -y bash-completion fi fi if [ -d /etc/bash_completion.d ]; then if [ -f /tmp/phreakscript_autocomplete.sh ]; then rm /tmp/phreakscript_autocomplete.sh fi if [ ! -f /etc/bash_completion.d/phreaknet ]; then # try to add auto-completion if [ -f /etc/bash.bashrc ]; then printf "Downloading auto-completion binding script\n" download_github_file "InterLinked1/phreakscript" "master" "phreakscript_autocomplete.sh" /tmp/phreakscript_autocomplete.sh mv /tmp/phreakscript_autocomplete.sh /etc/bash_completion.d/phreaknet # by default, auto completion isn't active, so activate it: # there has GOT to be a much better way to do this, but technically this will work: sed -i -r "s|#if ! shopt -oq posix; then|if ! shopt -oq posix; then|g" /etc/bash.bashrc sed -i -r "s|# if| if|g" /etc/bash.bashrc sed -i -r "s|# . /usr/share/bash-completion/bash_completion| . /usr/share/bash-completion/bash_completion|g" /etc/bash.bashrc sed -i -r "s|# elif| elif|g" /etc/bash.bashrc sed -i -r "s|# . /etc/bash_completion| . /etc/bash_completion|g" /etc/bash.bashrc sed -i -r "s|# fi| fi|g" /etc/bash.bashrc sed -i -r "s|#fi|fi|g" /etc/bash.bashrc fi fi fi exec /tmp/phreakscript_update.sh "$SCRIPT_UPSTREAM" "$FILE_PATH" "/tmp/phreakscript_update.sh" elif [ "$cmd" = "astpr" ]; then if [ "$2" = "" ]; then die "astpr requires a PR number" fi asterisk_pr "$2" 1 # force patch elif [ "$cmd" = "patch" ]; then printf "%s\n" "Updating PhreakNet Asterisk configuration..." rm -f /tmp/phreakpatch/*.patch rm -rf /tmp/phreakpatch mkdir /tmp/phreakpatch printf "%s\n" "Downloading patches..." $WGET -r -l 1 -nd -np -q -P /tmp/phreakpatch -R -A patch "https://code.phreaknet.org/asterisk/patches/" find /tmp/phreakpatch -name "*index*.html*" | xargs rm printf "%s\n" "Patching configuration..." if [ ! -d $AST_CONFIG_DIR/dialplan/phreaknet ]; then mkdir -p $AST_CONFIG_DIR/dialplan/phreaknet fi touch $AST_CONFIG_DIR/dialplan/phreaknet/patches.lst for file in /tmp/phreakpatch/*; do if [ -f $file ]; then base=`basename $file` if grep -q "$base" $AST_CONFIG_DIR/dialplan/phreaknet/patches.lst; then printf "%s\n" "Patch $base already installed or rejected, not applying again..." continue fi endfile=`printf '%s' $base | cut -d'_' -f2 | cut -d'.' -f1-2` if [ -f "$AST_CONFIG_DIR/dialplan/phreaknet/$endfile" ]; then patch -u -b -N $AST_CONFIG_DIR/dialplan/phreaknet/$endfile -i $file elif [ -f "$AST_CONFIG_DIR/dialplan/phreaknet/$endfile" ]; then patch -u -b -N $AST_CONFIG_DIR/dialplan/phreaknet/$endfile -i $file elif [ -f "$AST_CONFIG_DIR/dialplan/phreaknet/$endfile" ]; then patch -u -b -N $AST_CONFIG_DIR/dialplan/phreaknet/$endfile -i $file else echoerr "Failed to apply patch $file, couldn't find $endfile!" continue fi echo "$base" >> $AST_CONFIG_DIR/dialplan/phreaknet/patches.lst else echoerr "No file to apply?" fi done rm -rf /tmp/phreakpatch printf "%s\n" "Patching complete!" elif [ "$cmd" = "genpatch" ]; then echog "PhreakPatch Generation Helper Utility v1" cd /tmp printf '\a' read -r -p "Full path to file that will be patched idempotently: " file1 if [ ! -f $file1 ]; then die "File $file1 does not exist!" fi base=`basename $file1` mkdir /tmp/patch_${EPOCHSECONDS}_0 mkdir /tmp/patch_${EPOCHSECONDS}_1 old="/tmp/patch_${EPOCHSECONDS}_0/${base}" new="/tmp/patch_${EPOCHSECONDS}_1/${base}" patchfile="/tmp/${EPOCHSECONDS}_${base}.patch" cp $file1 $old printf '\a' read -r -p "Now patch the file and press ENTER when done: " cp $file1 $new diff -u $old $new > $patchfile rm -f $old $new /tmp/patch_${EPOCHSECONDS}_0 /tmp/patch_${EPOCHSECONDS}_1 printf "%s\n" "Patch file generated! Saved as $patchfile" if [ -s $patchfile ]; then read -e -i "$DEFAULT_PATCH_DIR" -p "Provide a folder for copy or press ENTER to finish: " input newfolder="${input:-newfolder}" if [ ${#newfolder} -gt 0 ]; then if [ -d $newfolder ]; then cp $patchfile $newfolder printf "%s\n" "Patch copied to $newfolder" else echoerr "Directory $newfolder doesn't exist. Patch not copied." fi fi else printf "%s\n" "Patch file is empty. Aborting." fi elif [ "$cmd" = "alembic" ]; then # This should only be done in a Git repository (developer usage only) git status if [ $? -ne 0 ]; then die "Not currently in a Git directory?" fi # Go into the alembic directory cd contrib/ast-db-manage if [ $? -ne 0 ]; then die "Directory not found: contrib/ast-db-manage" fi read -r -p "Alembic title: " title alembic -c config.ini.sample revision -m "$title" # https://alembic.sqlalchemy.org/en/latest/tutorial.html#create-a-migration-script printf "%s\n" "You will now need to manually edit the created file." printf "%s\n" "If your branch is not up to date, be sure to also update the head revision number!" elif [ "$cmd" = "kill" ]; then ast_kill elif [ "$cmd" = "forcerestart" ]; then ast_kill sleep 1 if ! asterisk -g; then echoerr "Failed to start Asterisk again." else echog "Successfully started Asterisk again." fi elif [ "$cmd" = "restart" ]; then # not really forcing install of anything, but to use the --force flag if [ "$FORCE_INSTALL" = "1" ]; then restart_telephony 0 else restart_telephony 1 fi elif [ "$cmd" = "stop" ]; then # not really forcing install of anything, but to use the --force flag if [ "$FORCE_INSTALL" = "1" ]; then stop_telephony 0 else stop_telephony 1 fi elif [ "$cmd" = "start" ]; then start_telephony elif [ "$cmd" = "edit" ]; then exec nano $FILE_PATH elif [ "$cmd" = "touch" ]; then printf "%s: " "$FILE_PATH" date -r $FILE_PATH elif [ "$cmd" = "validate" ]; then run_rules elif [ "$cmd" = "trace" ]; then VERBOSE_LEVEL=10 debugtime=$EPOCHSECONDS if [ "$debugtime" = "" ]; then debugtime=`awk 'BEGIN {srand(); print srand()}'` # https://stackoverflow.com/a/41324810 fi if [ "$debugtime" = "" ]; then echoerr "No debug time?" fi channel="debug_$debugtime.txt" if [ "$DEBUG_LEVEL" = "" ]; then printf "%s\n" "Debug level defaulting to 0" DEBUG_LEVEL=0 fi if [ "$DEBUG_LEVEL" -eq "$DEBUG_LEVEL" ] 2> /dev/null; then if [ $DEBUG_LEVEL -lt 0 ]; then die "Invalid debug level: $DEBUG_LEVEL" elif [ $DEBUG_LEVEL -gt 10 ]; then die "Invalid debug level: $DEBUG_LEVEL" else if [ $DEBUG_LEVEL -gt 0 ]; then asterisk -rx "logger add channel $channel notice,warning,error,verbose,debug,dtmf" asterisk -rx "core set debug $DEBUG_LEVEL" else asterisk -rx "logger add channel $channel notice,warning,error,verbose" fi fi else die "Debug level must be numeric: $DEBUG_LEVEL" fi asterisk -rx "core set verbose $VERBOSE_LEVEL" asterisk -rx "iax2 set debug on" # this might not actually appear in the trace, but doesn't hurt... printf "Starting trace (verbose %d, debug %d): %s\n" "$VERBOSE_LEVEL" "$DEBUG_LEVEL" "$debugtime" printf "%s\n" "Starting CLI trace..." read -r -p "A CLI trace is now being collected. Reproduce the issue, then press ENTER to conclude the trace: " x printf "%s\n" "CLI trace terminated..." asterisk -rx "logger remove channel $channel" if [ ! -f /var/log/asterisk/$channel ]; then die "CLI log trace file not found, aborting..." fi settings=`asterisk -rx 'core show settings'` printf "\n" >> /var/log/asterisk/$channel echo "------------------------------------------------------------------------" >> /var/log/asterisk/$channel echo "$settings" >> /var/log/asterisk/$channel # append helpful system info. echo "------------------------------------------------------------------------" >> /var/log/asterisk/$channel phreakscript_info >> /var/log/asterisk/$channel # append helpful system info. paste_post "/var/log/asterisk/$channel" "1" "1" elif [ "$cmd" = "dialplanfiles" ]; then debugtime=$EPOCHSECONDS if [ "$debugtime" = "" ]; then debugtime=`awk 'BEGIN {srand(); print srand()}'` # https://stackoverflow.com/a/41324810 fi if [ "$debugtime" = "" ]; then echoerr "No debug time?" fi channel="debug_$debugtime.txt" asterisk -rx "logger add channel $channel debug" asterisk -rx "core set debug 1" asterisk -rx "dialplan reload" asterisk -rx "core set debug 0" asterisk -rx "logger remove channel $channel" if [ ! -f /var/log/asterisk/$channel ]; then die "CLI log trace file not found, aborting..." fi grep "config.c: Parsing " /var/log/asterisk/$channel rm /var/log/asterisk/$channel elif [ "$cmd" = "applist" ]; then grep -ERo ",([A-Z][A-Za-z]+)\(" | cut -d',' -f2 | cut -d'(' -f1 | sort | uniq elif [ "$cmd" = "funclist" ]; then grep -ERo "\{([A-Z]+)\(" | cut -d'{' -f2 | cut -d'(' -f1 | sort | uniq elif [ "$cmd" = "paste" ]; then if [ ${#2} -eq 0 ]; then die "Usage: phreaknet paste " fi if [ ! -f "$2" ]; then die "File $2 does not exist" fi paste_post "$2" elif [ "$cmd" = "enable-backtraces" ]; then cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd $AST_SRC_DIR $AST_MAKE menuselect.makeopts menuselect/menuselect --enable DONT_OPTIMIZE --enable BETTER_BACKTRACES menuselect.makeopts $AST_MAKE $AST_MAKE install elif [ "$cmd" = "valgrind" ]; then # https://wiki.asterisk.org/wiki/display/AST/Valgrind apt-get install -y valgrind cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd /tmp asterisk -rx "core stop now" sleep 1 valgrind --suppressions=$AST_SOURCE_PARENT_DIR/${AST_SRC_DIR}contrib/valgrind.supp -s --log-fd=9 asterisk -vvvvcg 9 > /tmp/asteriskvalgrind.txt paste_post "/tmp/asteriskvalgrind.txt" ls /tmp/asteriskvalgrind.txt elif [ "$cmd" = "cppcheck" ]; then ensure_installed cppcheck cd_ast printf "%s\n" "Running cppcheck and dumping errors to cppcheck.txt" cppcheck --enable=all --suppress=unknownMacro . 2> cppcheck.txt printf "%s\n" "cppcheck completed. Errors dumped to cppcheck.txt" elif [ "$cmd" = "malloc-debug" ]; then # https://wiki.asterisk.org/wiki/display/AST/MALLOC_DEBUG+Compiler+Flag cd $AST_SOURCE_PARENT_DIR AST_SRC_DIR=`get_newest_astdir` cd $AST_SRC_DIR asterisk -rx "core show settings" | grep "Build Options:" | grep "MALLOC_DEBUG" if [ $? -ne 0 ]; then # either Asterisk isn't running or MALLOC_DEBUG isn't a currently compiler option, so recompile with MALLOC_DEBUG $AST_MAKE menuselect.makeopts menuselect/menuselect --enable DONT_OPTIMIZE --enable BETTER_BACKTRACES --enable MALLOC_DEBUG menuselect.makeopts $AST_MAKE $AST_MAKE install fi cd /tmp read -r -p "Press ENTER to restart Asterisk with MALLOC_DEBUG enabled: " asterisk -rx "core stop now" asterisk -g read -r -p "MALLOC_DEBUG is currently collecting debug. Press ENTER once issue has been reproduced: " if [ ! -f "/var/log/asterisk/mmlog" ]; then die "Could not find /var/log/asterisk/mmlog" fi paste_post "/var/log/asterisk/mmlog" ls /var/log/asterisk/mmlog elif [ "$cmd" = "backtrace-only" ]; then get_backtrace 0 elif [ "$cmd" = "backtrace" ]; then get_backtrace 1 elif [ "$cmd" = "rundump" ]; then coredump_prep nice -5 $AST_VARLIB_DIR/scripts/ast_coredumper --RUNNING > /tmp/ast_coredumper.txt corefullpath=$( grep "full.txt" /tmp/ast_coredumper.txt | cut -d' ' -f2 ) # the file is no longer necessarily simply just /tmp/core-full.txt if [ ! -f /tmp/ast_coredumper.txt ] || [ ${#corefullpath} -le 1 ]; then echoerr "Failed to get core dump of running process" die "Make sure to start asterisk with -g or set dumpcore=yes in asterisk.conf" fi cat /tmp/ast_coredumper.txt rm -f /tmp/ast_coredumper.txt printf "%s\n" "Uploading paste of backtrace..." paste_post "$corefullpath" elif [ "$cmd" = "threads" ]; then # Debug CPU usage of specific threads. pid=`cat /var/run/asterisk/asterisk.pid` if [ ${#pid} -eq 0 ]; then die "Asterisk is not currently running." fi ps -o pid,lwp,pcpu,pmem,comm,cmd -L $pid /sbin/asterisk -rx "core show threads" # Running phreaknet rundump here is probably useful as well. elif [ "$cmd" = "reftrace" ]; then # Should be compiled with REF_DEBUG # Asterisk should be stopped (not running) /var/lib/asterisk/scripts/refcounter.py -f /var/log/asterisk/refs -n > /tmp/refs.txt ls -la /tmp/refs.txt elif [ "$cmd" = "ccache" ]; then cd $AST_SOURCE_PARENT_DIR $WGET https://github.com/ccache/ccache/releases/download/v4.5.1/ccache-4.5.1.tar.gz if [ $? -ne 0 ]; then exit 1 fi tar -zxvf ccache-4.5.1.tar.gz cd ccache-4.5.1 cmake -DCMAKE_BUILD_TYPE=Release -DZSTD_FROM_INTERNET=ON -DHIREDIS_FROM_INTERNET=ON .. $AST_MAKE $AST_MAKE install if [ $? -ne 0 ]; then exit 1 fi which ccache ln -s ccache /usr/local/bin/gcc ln -s ccache /usr/local/bin/g++ ln -s ccache /usr/local/bin/cc ln -s ccache /usr/local/bin/c++ which gcc elif [ "$cmd" = "apiban" ]; then # install apiban-client: https://github.com/palner/apiban if [ ${#APIBAN_KEY} -le 1 ]; then read -r -p "apiban API key: " APIBAN_KEY fi if [ ! -d /usr/local/bin/apiban ]; then mkdir /usr/local/bin/apiban fi cd /usr/local/bin/apiban if [ ! -f apiban-iptables-client ]; then $WGET https://github.com/palner/apiban/raw/v0.7.0/clients/go/apiban-iptables-client fi if [ ! -f config.json ]; then download_github_file "palner/apiban" "v0.7.0" "clients/go/apiban-iptables/config.json" fi if [ ${#APIBAN_KEY} -gt 0 ]; then sed -i "s/MY API KEY/$APIBAN_KEY/" config.json fi chmod +x /usr/local/bin/apiban/apiban-iptables-client cat > /etc/logrotate.d/apiban-client << EOF /var/log/apiban-client.log { daily copytruncate rotate 7 compress } EOF if [ ! -f /usr/local/bin/apiban/apiban-iptables-client ]; then die "apiban-client not installed successfully" fi /usr/local/bin/apiban/apiban-iptables-client printf "%s\n\n" "apiban-client has been installed" printf "%s\n" "To run this regularly, run crontab -e and add:" printf "%s\n" "*/4 * * * * /usr/local/bin/apiban/apiban-iptables-client >/dev/null 2>&1" # EDITOR=nano crontab -e elif [ "$cmd" = "iaxping" ]; then if [ ${#2} -eq 0 ]; then die "Usage: phreaknet iaxping []" fi port=4569 host="$2" if [ ${#3} -gt 0 ]; then if [ "$3" -eq "$3" ] 2> /dev/null; then port="$3" else die "Invalid port number: $3" fi fi ensure_installed nmap exec nmap -sU ${host} -p ${port} elif [ "$cmd" = "pcap" ]; then ensure_installed tshark debugtime=$EPOCHSECONDS if [ "$debugtime" = "" ]; then debugtime=`awk 'BEGIN {srand(); print srand()}'` # https://stackoverflow.com/a/41324810 fi ip="" if [ ${#2} -gt 0 ]; then ip=$2 printf "%s\n" "Starting packet capture for IP $ip - press CTRL+C to conclude" tshark -f "not port 22 and host $ip" -i any -w /tmp/pcap_$debugtime.pcap & else printf "%s\n" "Starting packet capture (all IPs) - press CTRL+C to conclude" tshark -f "not port 22" -i any -w /tmp/pcap_$debugtime.pcap & fi BGPID=$! trap handler INT wait $BGPID printf "Packet capture successfully saved to %s\n" "/tmp/pcap_$debugtime.pcap" elif [ "$cmd" = "pcaps" ]; then ensure_installed tshark debugtime=$EPOCHSECONDS if [ "$debugtime" = "" ]; then debugtime=`awk 'BEGIN {srand(); print srand()}'` # https://stackoverflow.com/a/41324810 fi ip="" if [ ${#2} -gt 0 ]; then ip=$2 printf "%s\n" "Starting packet capture for IP $ip - press CTRL+C to conclude" tshark -f "not port 22 and host $ip" -i any -w /tmp/pcap_$debugtime.pcap & else printf "%s\n" "Starting packet capture (all IPs) - press CTRL+C to conclude" tshark -f "not port 22" -i any -w /tmp/pcap_$debugtime.pcap & fi BGPID=$! trap handler INT wait $BGPID printf "Packet capture successfully saved to %s\n" "/tmp/pcap_$debugtime.pcap" exec sngrep -I /tmp/pcap_$debugtime.pcap elif [ "$cmd" = "sngrep" ]; then ensure_installed sngrep exec sngrep elif [ "$cmd" = "freedisk" ]; then df -h / apt-get clean logrotate -f /etc/logrotate.conf rm -f /var/log/*.gz rm -f /var/log/asterisk/*.gz if [ -f /var/log/asterisk/full.1 ]; then rm /var/log/asterisk/full.1 fi if [ -f /var/log/apache2/modsec_audit.log ]; then echo "" > /var/log/apache2/modsec_audit.log fi if [ -f /var/log/asterisk/security ]; then echo "" > /var/log/asterisk/security fi if [ -d /var/crash ]; then rm -f /var/crash/core* fi if [ -f /var/log/asterisk/refs ]; then echo "" > /var/log/asterisk/refs fi rm -f /tmp/core* rm -rf /var/lib/snapd/cache/* # can be safely removed: https://askubuntu.com/questions/1075050/how-to-remove-uninstalled-snaps-from-cache/1156686#1156686 snap services snap remove hello-world set -eu snap list --all | awk '/disabled/{print $1, $3}' | while read snapname revision; do snap remove "$snapname" --revision="$revision" done service fail2ban stop rm -rf /var/lib/fail2ban service fail2ban start if [ "$PAC_MAN" = "apt-get" ]; then apt autoremove -y fi rm -f /tmp/core* df -h / elif [ "$cmd" = "topdisk" ]; then df -h -x squashfs -x tmpfs -x devtmpfs find / -printf '%s %p\n'| sort -nr | head -50 elif [ "$cmd" = "topdir" ]; then # For largest directories in current directory: du -sh * | sort -rh elif [ "$cmd" = "enable-swap" ]; then # https://www.digitalocean.com/community/tutorials/how-to-add-swap-space-on-debian-10 assert_root swap=`swapon --show | wc -l | tr -d '\n'` if [ "$swap" = "0" ]; then echo "Swap is currently disabled" else echoerr "Swap is already enabled" swapon --show exit 1 fi freediskspace=`df / | awk '{print $4}' | tail -n +2 | tr -d '\n'` if [ $freediskspace -gt 1300000 ]; then echo "More than 1.3 GB of free disk space, allocating 1 GB swap" fallocate -l 1G /swapfile elif [ $freediskspace -gt 800000 ]; then echo "More than 800 MB of free disk space, allocating 500 MB space" fallocate -l 500M /swapfile else die "Only $freediskspace KB of space available (not enough to add sufficient swap)" fi chmod 600 /swapfile mkswap /swapfile swapon /swapfile swapon --show free -h # To make the swap permanent: # cp /etc/fstab /etc/fstab.bak # echo '/swapfile none swap sw 0 0' | tee -a /etc/fstab cat /proc/sys/vm/swappiness sysctl vm.swappiness=60 # should be high but not too high, see: https://stackoverflow.com/questions/44954336/gdb-commits-suicide-kills-debugged-process-out-of-a-sudden sysctl vm.vfs_cache_pressure=50 elif [ "$cmd" = "disable-swap" ]; then assert_root swap=`swapon --show | wc -l | tr -d '\n'` if [ "$swap" != "0" ]; then swapoff -a echo "Swap is currently enabled, disabling" else echo "Swap is already disabled" fi swapon --show # if in /etc/fstab, then should be removed from there, too! if [ ! -f /swapfile ]; then die "/swapfile does not exist!" fi df -h / rm /swapfile df -h / echo "Removed swapfile!" elif [ "$cmd" = "examples" ]; then printf "%s\n\n" "========= PhreakScript Example Usages =========" printf "%s\n\n" "Presented in the logical order of usage, but with multiple variations for each command." printf "%s\n\n" "Installation commands:" printf "%s\n" "phreaknet install Install the latest version of Asterisk." printf "%s\n" "phreaknet install --cc=44 Install the latest version of Asterisk, with country code 44." printf "%s\n" "phreaknet install --force Reinstall the latest version of Asterisk." printf "%s\n" "phreaknet install --dahdi Install the latest version of Asterisk, with DAHDI." printf "%s\n" "phreaknet install --sip --weaktls Install Asterisk with chan_sip built AND support for TLS 1.0." printf "%s\n" "phreaknet install --version 18.9.0 Install Asterisk version 18.9.0 as the base version of Asterisk." printf "%s\n" "phreaknet install --version=20 Install latest version of Asterisk 20 as the base version of Asterisk." printf "%s\n" "phreaknet installts Install Asterisk Test Suite and Unit Test support (developers only)." printf "%s\n" "phreaknet pulsar Install revertive pulsing pulsar AGI, with bug fixes" printf "%s\n" "phreaknet sounds --boilerplate Install Pat Fleet sounds and basic boilerplate old city tone audio." printf "%s\n" "phreaknet config --force --api-key= --clli= --disa=" printf "%s\n" " Download and initialize boilerplate PhreakNet configuration" printf "%s\n" "phreaknet keygen Upload existing RSA public key to PhreakNet" printf "%s\n" "phreaknet keygen --rotate Create or rotate PhreakNet RSA keypair, then upload public key to PhreakNet" printf "%s\n" "phreaknet validate Validate your dialplan configuration and check for errors" printf "\n%s\n\n" "Debugging commands:" printf "%s\n" "phreaknet trace Perform a trace with verbosity 10 and no debug level (notify Bus. Ofc.)" printf "%s\n" "phreaknet trace --debug 1 Perform a trace with verbosity 10 and debug level 1 (notify Bus. Ofc.)" printf "%s\n" "phreaknet backtrace Process, extract, and upload a core dump" printf "\n%s\n\n" "Maintenance commands:" printf "%s\n" "phreaknet update Update PhreakScript. No Asterisk or configuration modification will occur." printf "%s\n" "phreaknet update --upstream=URL Update PhreakScript using URL as the upstream source (for testing)." printf "%s\n" "phreaknet patch Apply the latest PhreakNet configuration patches." printf "%s\n" "phreaknet fullpatch app_verify Download the latest version of the app_verify module." printf "\n" elif [ "$cmd" = "version" ]; then printf "%s" "PhreakScript " grep "# v" $FILE_PATH | head -1 | cut -d'v' -f2 elif [ "$cmd" = "info" ]; then phreakscript_info elif [ "$cmd" = "about" ]; then printf "%s\n%s\n%s\n\n" "========= PhreakScript =========" "PhreakScript automates the management of Asterisk and DAHDI, from installation to patching to debugging." "The version of Asterisk and DAHDI installed by PhreakScript isn't a fork of Asterisk/DAHDI. Rather, it builds on top of the latest versions of Asterisk and DAHDI, so that users benefit from bug fixes and new features and improvements upstream, but also adds additional bug fixes and features that haven't made it upstream, to provide the fullest and richest Asterisk/DAHDI experience. For more details, see https://phreaknet.org/changes" | fold -s -w 80 printf "%s\n" "Change Log (both changes to PhreakScript and to Asterisk/DAHDI as installed by PhreakScript)" grep "^#" $FILE_PATH | grep -A 999999 "Begin Change Log" | grep -B 999999 "End Change Log" | tail -n +2 | head -n -1 | cut -c 3- printf "\n" phreakscript_info else die "Invalid command: $cmd, type phreaknet help for usage." fi